[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (299.2, 333.0) = 11 4 19.96 38 15 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.1 +/- 16.9
  Background counts = 71.2
  Rate = 0.009 +/- 0.002

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 2.50'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Wed Jul 11 04:11:33 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 7.68"
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src48.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src48.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src48_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src48.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Wed Jul 11 09:14:09 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Wed Jul 11 09:14:39 2012] Source 17 is offset by -4.224737 and -7.857802 pixels which is larger than
2 X fitted extent = 7.032230 x 7.032230, not incorporating fit results
[Wed Jul 11 09:14:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:39 2012] Assessing source extent using major
[Wed Jul 11 09:14:39 2012] Source does appear to be extended
[Wed Jul 11 09:14:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:23:43 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:23:43 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Wed Jul 11 17:23:43 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Wed Jul 11 17:23:43 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 7.68"
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src40.ximg exists
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src40_1.ximg exists
[Wed Jul 11 23:21:00 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src40 appears to have run properly
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src40.csv
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src40.csv
[Wed Jul 11 23:21:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:30 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 10.232702 pixels away
[Wed Jul 11 23:21:30 2012] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 10.883765 pixels away
[Wed Jul 11 23:21:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:30 2012] Assessing source extent using major
[Wed Jul 11 23:21:30 2012] Source does appear to be extended
[Wed Jul 11 23:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 15:41:48 2012] XMMSAS src. selection expression = ellipse(25982.779877, 28919.489197, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing source region out to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src17_src.reg
[Thu Jul 12 15:41:48 2012] Extracting stamp from image fullrun_mos2_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (262, 295) - (337, 370)
[Thu Jul 12 15:41:48 2012] XMMSAS bgd. selection expression = annulus(25982.779877, 28919.489197, 1087.500000, 2175.000000, X, Y) && !ellipse(24578.001221, 25968.102875, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24502.476257, 25532.837372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24267.460000, 25175.864800, 3500.136101, 3500.136101, 0.000000, X, Y) && !ellipse(22579.859000, 28582.750000, 1283.952037, 1006.320029, 353.373000, X, Y) && !ellipse(24354.176200, 27934.598000, 1229.928035, 1229.928035, 0.000000, X, Y) && !ellipse(27234.304000, 27096.446000, 1180.640034, 1180.640034, 0.000000, X, Y) && !ellipse(28380.621720, 26332.732000, 1103.208032, 1103.208032, 0.000000, X, Y) && !ellipse(23768.458893, 28912.185211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.318000, 28054.888000, 1213.224035, 1213.224035, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src17.gif
[Thu Jul 12 16:39:05 2012] Mean detx,y = (2916.55, -4042.99) 
[Thu Jul 12 16:39:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 16:39:20 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 16:39:20 2012] Setting source spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jul 12 16:39:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Jul 12 19:22:40 2012] Not generating rmf since there are only 85 counts
[Thu Jul 12 19:22:40 2012] rmf not generated due to insufficient counts
[Thu Jul 12 21:16:11 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:11 2012] Error reading totcts from fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jul 12 21:16:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:13 2012] Using photon index=1.80, rate=0.00881, arf fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src17.arf
[Thu Jul 12 21:16:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:13 2012] Updating source flux to 9.1e-14
[Thu Jul 12 21:21:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting