[Tue Jul 10 22:01:19 2012] Detection parameters:
  Position = (377.1, 165.1) = 11 3 51.27 38 2 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.1 +/- 12.9
  Background counts = 7.3
  Rate = 0.008 +/- 0.001

[Tue Jul 10 22:01:20 2012] Off-axis axis estimate = 11.22'
[Wed Jul 11 01:21:41 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 01:21:41 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Wed Jul 11 01:21:41 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.843
[Wed Jul 11 01:21:41 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 12.04"
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src42.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src42.csv
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src42_1.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src42.csv
[Wed Jul 11 04:11:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 04:11:33 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Wed Jul 11 04:11:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src42.csv
[Wed Jul 11 04:11:33 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Wed Jul 11 04:11:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src42.csv
[Wed Jul 11 04:11:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:28 2012] Warning, spatial fit 42 centroid is now closest to src. 60
[Wed Jul 11 09:14:28 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:28 2012] Assessing source extent using major
[Wed Jul 11 09:14:28 2012] Source does appear to be extended
[Wed Jul 11 09:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:28 2012] Source is confused with source 59
[Wed Jul 11 09:14:28 2012] Source is confused with source 60
[Wed Jul 11 12:09:20 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:09:20 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Wed Jul 11 12:09:20 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.843
[Wed Jul 11 12:09:20 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 12.04"
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src41.ximg exists
[Wed Jul 11 17:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src41.csv
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed Jul 11 17:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src41.csv
[Wed Jul 11 17:23:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed Jul 11 17:23:42 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Wed Jul 11 23:21:21 2012] Source 57 is offset by -1.459157 and -4.212222 pixels which is larger than
2 X fitted extent = 1.331494 x 1.331494, not incorporating fit results
[Wed Jul 11 23:21:21 2012] Spatial fit model total counts = 856.002000, observed total counts = 836.000000
[Wed Jul 11 23:21:21 2012] Offset between fit and detection position for source 57 = 5.266954 pixels
[Wed Jul 11 23:21:21 2012] Warning, changing simple spatial fit ID from 41 to 31
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 5.266954 pixels
  Position = (373.5, 169.0) = 11 3 52.59 38 3 17.2
  Extent = 41.2 (40.4-41.6)", rotation angle = 0
  Source counts = 850.6 +/- 29.2
  Background counts = 0.0
  Rate = 0.08 +/- 0.003
[Wed Jul 11 23:21:21 2012] Spatial fit model total counts = 345.439000, observed total counts = 343.000000
[Wed Jul 11 23:21:21 2012] Offset between fit and detection position for source 57 = 3.327480 pixels
[Wed Jul 11 23:21:21 2012] Warning, changing simple spatial fit ID from 31 to 41
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 3.327480 pixels
  Position = (371.8, 171.8) = 11 3 53.22 38 3 29.7
  Extent = 21.9 (19.8-24.1)", rotation angle = 0
  Source counts = 341.2 +/- 18.5
  Background counts = 0.0
  Rate = 0.03 +/- 0.002
[Wed Jul 11 23:21:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:21 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:21 2012] Source does appear to be extended
[Wed Jul 11 23:21:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 09:36:57 2012] XMMSAS src. selection expression = ellipse(32301.478000, 14899.676000, 1311.090038, 1311.090038, 0.000000, X, Y)
[Thu Jul 12 09:36:57 2012] Writing source region out to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src57_src.reg
[Thu Jul 12 09:36:57 2012] Extracting stamp from image fullrun_mos1_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (296, 96) - (447, 247)
[Thu Jul 12 09:36:57 2012] XMMSAS bgd. selection expression = annulus(32301.478000, 14899.676000, 2185.150063, 4370.300126, X, Y) && !ellipse(30880.482000, 16736.732000, 1723.800050, 1723.800050, 0.000000, X, Y) && !ellipse(30187.246000, 17743.034000, 1856.760053, 1856.760053, 0.000000, X, Y) && !ellipse(31301.812469, 16133.628769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29800.470000, 18189.954000, 2216.376064, 2216.376064, 0.000000, X, Y) && !ellipse(29128.866000, 19167.904000, 2866.064082, 2866.064082, 0.000000, X, Y) && !ellipse(31705.040000, 15687.542000, 1773.024051, 1773.024051, 0.000000, X, Y) && !ellipse(35053.764000, 11214.244000, 2130.800061, 2130.800061, 0.000000, X, Y) && !ellipse(33031.832000, 13842.080000, 1687.312049, 1687.312049, 0.000000, X, Y) && !ellipse(35570.072000, 10465.946000, 1620.080047, 1620.080047, 0.000000, X, Y) && !ellipse(34388.556000, 12031.580000, 3919.360113, 3919.360113, 0.000000, X, Y) && !ellipse(33493.084000, 13268.758000, 1960.456056, 1960.456056, 0.000000, X, Y) && !ellipse(34042.124961, 12565.655027, 1991.448057, 386.095140, 54.491371, X, Y) && !ellipse(34812.128160, 11516.124200, 1991.448057, 469.113613, 54.565400, X, Y)
[Thu Jul 12 09:36:57 2012] Writing fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src57.gif
[Thu Jul 12 10:29:39 2012] Mean detx,y = (11213.22, 22.65) 
[Thu Jul 12 10:29:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 10:29:58 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 10:29:58 2012] Setting source spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Thu Jul 12 10:29:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Thu Jul 12 21:16:07 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:07 2012] Error reading totcts from fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Thu Jul 12 21:16:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:09 2012] Using photon index=1.80, rate=0.0306, arf fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src57.arf
[Thu Jul 12 21:16:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:09 2012] Updating source flux to 4.7e-13
[Thu Jul 12 21:16:14 2012] Flag b found in src. 57 procflags, skipping spectral fitting
[Thu Jul 12 21:16:14 2012] Flag c found in src. 57 procflags, skipping spectral fitting