[Tue Jul 10 22:01:19 2012] Detection parameters:
  Position = (365.9, 178.9) = 11 3 55.40 38 4 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.2 +/- 11.5
  Background counts = 8.2
  Rate = 0.01 +/- 0.002

[Tue Jul 10 22:01:20 2012] Off-axis axis estimate = 9.95'
[Wed Jul 11 01:21:41 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 01:21:41 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Wed Jul 11 01:21:41 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.924
[Wed Jul 11 01:21:41 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 11.40"
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src32.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src32.csv
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src32_1.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src32.csv
[Wed Jul 11 04:11:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 04:11:33 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Wed Jul 11 04:11:33 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Wed Jul 11 04:11:33 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Wed Jul 11 09:14:28 2012] Spatial fit model total counts = 320.993000, observed total counts = 325.000000
[Wed Jul 11 09:14:28 2012] Offset between fit and detection position for source 55 = 2.737827 pixels
[Wed Jul 11 09:14:28 2012] Warning, changing simple spatial fit ID from 32 to 28
[Wed Jul 11 09:14:28 2012] 320.495390 total counts/ 8.009390 bgd. counts: snr = 110.415704
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 2.737827 pixels
  Position = (363.9, 180.9) = 11 3 56.13 38 4 9.0
  Extent = 20.8 (20.8-20.8)", rotation angle = 0
  Source counts = 312.5 +/- 17.9
  Background counts = 8.0
  Rate = 0.03 +/- 0.002
[Wed Jul 11 09:14:28 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:28 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 09:14:28 2012] Source does appear to be extended
[Wed Jul 11 09:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:28 2012] Source is confused with source 54
[Wed Jul 11 12:09:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:09:20 2012] Initial guess for spatial extent in simple fitting = 20.81"
[Wed Jul 11 12:09:20 2012] source mask rpix=4.8, npix_max = 111, mask sum = 100, frac = 0.896
[Wed Jul 11 12:09:20 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 20.81"
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src31.ximg exists
[Wed Jul 11 17:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src31.csv
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed Jul 11 17:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src31.csv
[Wed Jul 11 17:23:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed Jul 11 17:23:42 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Wed Jul 11 23:21:21 2012] Spatial fit model total counts = 403.655000, observed total counts = 401.000000
[Wed Jul 11 23:21:21 2012] Offset between fit and detection position for source 55 = 1.064130 pixels
[Wed Jul 11 23:21:21 2012] Warning, changing simple spatial fit ID from 31 to 23
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 1.064130 pixels
  Position = (365.0, 180.9) = 11 3 55.74 38 4 9.1
  Extent = 22.2 (22.1-44.3)", rotation angle = 0
  Source counts = 396.6 +/- 19.9
  Background counts = 0.0
  Rate = 0.04 +/- 0.002
[Wed Jul 11 23:21:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:21 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:21 2012] Source does appear to be extended
[Wed Jul 11 23:21:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 09:36:57 2012] XMMSAS src. selection expression = ellipse(31705.040000, 15687.542000, 1329.768038, 1329.768038, 0.000000, X, Y)
[Thu Jul 12 09:36:57 2012] Writing source region out to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src55_src.reg
[Thu Jul 12 09:36:57 2012] Extracting stamp from image fullrun_mos1_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (289, 104) - (441, 257)
[Thu Jul 12 09:36:57 2012] XMMSAS bgd. selection expression = annulus(31705.040000, 15687.542000, 2216.280064, 4432.560128, X, Y) && !ellipse(30880.482000, 16736.732000, 1723.800050, 1723.800050, 0.000000, X, Y) && !ellipse(30187.246000, 17743.034000, 1856.760053, 1856.760053, 0.000000, X, Y) && !ellipse(31301.812469, 16133.628769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28284.408844, 20275.637756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29800.470000, 18189.954000, 2216.376064, 2216.376064, 0.000000, X, Y) && !ellipse(29128.866000, 19167.904000, 2866.064082, 2866.064082, 0.000000, X, Y) && !ellipse(27710.494000, 21179.754000, 1482.872043, 1482.872043, 0.000000, X, Y) && !ellipse(35053.764000, 11214.244000, 2130.800061, 2130.800061, 0.000000, X, Y) && !ellipse(32301.478000, 14899.676000, 1748.120050, 1748.120050, 0.000000, X, Y) && !ellipse(33031.832000, 13842.080000, 1687.312049, 1687.312049, 0.000000, X, Y) && !ellipse(35570.072000, 10465.946000, 1620.080047, 1620.080047, 0.000000, X, Y) && !ellipse(34388.556000, 12031.580000, 3919.360113, 3919.360113, 0.000000, X, Y) && !ellipse(33493.084000, 13268.758000, 1960.456056, 1960.456056, 0.000000, X, Y) && !ellipse(34042.124961, 12565.655027, 1991.448057, 386.095140, 54.491371, X, Y) && !ellipse(34812.128160, 11516.124200, 1991.448057, 469.113613, 54.565400, X, Y)
[Thu Jul 12 09:36:57 2012] Writing fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src55.gif
[Thu Jul 12 10:24:28 2012] Mean detx,y = (10179.27, 36.37) 
[Thu Jul 12 10:24:30 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 10:24:51 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 10:24:52 2012] Setting source spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Thu Jul 12 10:24:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Thu Jul 12 21:16:06 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:06 2012] Error reading totcts from fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Thu Jul 12 21:16:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:08 2012] Using photon index=1.80, rate=0.0355, arf fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src55.arf
[Thu Jul 12 21:16:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:08 2012] Updating source flux to 5e-13
[Thu Jul 12 21:16:14 2012] Flag c found in src. 55 procflags, skipping spectral fitting