[Tue Jul 10 22:01:19 2012] Detection parameters:
  Position = (360.3, 186.0) = 11 3 57.44 38 4 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.7 +/- 13.6
  Background counts = 9.0
  Rate = 0.02 +/- 0.002

[Tue Jul 10 22:01:20 2012] Off-axis axis estimate = 9.31'
[Wed Jul 11 01:21:41 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 01:21:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 01:21:41 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Wed Jul 11 01:21:41 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.969
[Wed Jul 11 01:21:41 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.08"
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src23.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src23.csv
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src23_1.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src23.csv
[Wed Jul 11 04:11:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 04:11:33 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Wed Jul 11 04:11:33 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Jul 11 04:11:33 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Wed Jul 11 09:14:28 2012] Warning, spatial fit 23 centroid is now closest to src. 52
[Wed Jul 11 09:14:28 2012] Source 54 is offset by 0.082005 and -4.480106 pixels which is larger than
2 X fitted extent = 1.465540 x 1.465540, not incorporating fit results
[Wed Jul 11 09:14:28 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:28 2012] Assessing source extent using major
[Wed Jul 11 09:14:28 2012] Source does appear to be extended
[Wed Jul 11 09:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:28 2012] Source is confused with source 52
[Wed Jul 11 09:14:28 2012] Source is confused with source 55
[Wed Jul 11 12:09:20 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:09:20 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Wed Jul 11 12:09:20 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.969
[Wed Jul 11 12:09:20 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 11.08"
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src23.ximg exists
[Wed Jul 11 17:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src23.csv
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed Jul 11 17:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src23.csv
[Wed Jul 11 17:23:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Jul 11 17:23:42 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Wed Jul 11 23:21:21 2012] Warning, spatial fit 23 centroid is now closest to src. 55
[Wed Jul 11 23:21:21 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 54 at 25.177708 pixels away
[Wed Jul 11 23:21:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:21 2012] Assessing source extent using major
[Wed Jul 11 23:21:21 2012] Source does appear to be extended
[Wed Jul 11 23:21:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 09:36:57 2012] XMMSAS src. selection expression = ellipse(31301.812469, 16133.628769, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 09:36:57 2012] Writing source region out to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src54_src.reg
[Thu Jul 12 09:36:57 2012] Extracting stamp from image fullrun_mos1_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (323, 149) - (398, 224)
[Thu Jul 12 09:36:57 2012] XMMSAS bgd. selection expression = annulus(31301.812469, 16133.628769, 1087.500000, 2175.000000, X, Y) && !ellipse(30880.482000, 16736.732000, 1723.800050, 1723.800050, 0.000000, X, Y) && !ellipse(30187.246000, 17743.034000, 1856.760053, 1856.760053, 0.000000, X, Y) && !ellipse(29800.470000, 18189.954000, 2216.376064, 2216.376064, 0.000000, X, Y) && !ellipse(29128.866000, 19167.904000, 2866.064082, 2866.064082, 0.000000, X, Y) && !ellipse(31705.040000, 15687.542000, 1773.024051, 1773.024051, 0.000000, X, Y) && !ellipse(32301.478000, 14899.676000, 1748.120050, 1748.120050, 0.000000, X, Y) && !ellipse(33031.832000, 13842.080000, 1687.312049, 1687.312049, 0.000000, X, Y) && !ellipse(34388.556000, 12031.580000, 3919.360113, 3919.360113, 0.000000, X, Y) && !ellipse(33493.084000, 13268.758000, 1960.456056, 1960.456056, 0.000000, X, Y) && !ellipse(34042.124961, 12565.655027, 1991.448057, 386.095140, 54.491371, X, Y)
[Thu Jul 12 09:36:57 2012] Writing fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src54.gif
[Thu Jul 12 10:17:31 2012] Mean detx,y = (9643.34, 93.84) 
[Thu Jul 12 10:17:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 10:17:51 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 10:17:52 2012] Setting source spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Thu Jul 12 10:17:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Thu Jul 12 14:13:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 14:13:40 2012] rmf not generated due to insufficient counts
[Thu Jul 12 21:16:06 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:06 2012] Error reading totcts from fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Thu Jul 12 21:16:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:08 2012] Using photon index=1.80, rate=0.0165, arf fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src54.arf
[Thu Jul 12 21:16:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:08 2012] Updating source flux to 2.6e-13
[Thu Jul 12 21:16:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting