[Tue Jul 10 22:01:19 2012] Detection parameters:
  Position = (356.2, 192.9) = 11 3 58.96 38 4 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.6 +/- 15.3
  Background counts = 9.8
  Rate = 0.02 +/- 0.002

[Tue Jul 10 22:01:20 2012] Off-axis axis estimate = 8.72'
[Wed Jul 11 01:21:41 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 01:21:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 01:21:41 2012] Initial guess for spatial extent in simple fitting = 10.79"
[Wed Jul 11 01:21:41 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013
[Wed Jul 11 01:21:41 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.79"
[Wed Jul 11 04:11:31 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src17.ximg exists
[Wed Jul 11 04:11:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src17.csv
[Wed Jul 11 04:11:31 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src17.csv
[Wed Jul 11 04:11:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Jul 11 04:11:32 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Jul 11 09:14:28 2012] Spatial fit model total counts = 440.159000, observed total counts = 438.000000
[Wed Jul 11 09:14:28 2012] Offset between fit and detection position for source 53 = 0.357379 pixels
[Wed Jul 11 09:14:28 2012] 426.508400 total counts/ 349.578000 bgd. counts: snr = 4.114584
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.357379 pixels
  Position = (355.9, 192.8) = 11 3 59.09 38 5 1.1
  Extent = 7.3 (4.5-9.3)", rotation angle = 0
  Source counts = 76.9 +/- 20.7
  Background counts = 349.6
  Rate = 0.007 +/- 0.002
[Wed Jul 11 09:14:28 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:28 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 09:14:28 2012] Source does appear to be extended
[Wed Jul 11 09:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:28 2012] Source is confused with source 52
[Wed Jul 11 09:14:28 2012] Source is confused with source 51
[Wed Jul 11 12:09:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:09:20 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Jul 11 12:09:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Wed Jul 11 12:09:20 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.27"
[Wed Jul 11 17:23:40 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src17.ximg exists
[Wed Jul 11 17:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src17.csv
[Wed Jul 11 17:23:40 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Jul 11 17:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src17.csv
[Wed Jul 11 17:23:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Jul 11 17:23:42 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Jul 11 23:21:21 2012] Warning, spatial fit 17 centroid is now closest to src. 52
[Wed Jul 11 23:21:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:21 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:21 2012] Source does appear to be extended
[Wed Jul 11 23:21:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 23:21:21 2012] Deleting source due to low Poisson probability 0.9