[Tue Jul 10 22:01:19 2012] Detection parameters:
  Position = (334.2, 222.2) = 11 4 7.05 38 7 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.1 +/- 15.7
  Background counts = 19.9
  Rate = 0.01 +/- 0.002

[Tue Jul 10 22:01:20 2012] Off-axis axis estimate = 6.11'
[Wed Jul 11 01:21:41 2012] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 01:21:41 2012] Initial guess for spatial extent in simple fitting = 9.48"
[Wed Jul 11 01:21:41 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.870
[Wed Jul 11 01:21:41 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.48"
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src29.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src29.csv
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src29.csv
[Wed Jul 11 04:11:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 04:11:33 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed Jul 11 04:11:33 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Jul 11 04:11:33 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Wed Jul 11 09:14:28 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 20.652091 pixels away
[Wed Jul 11 09:14:28 2012] Spatial fit model total counts = 512.753000, observed total counts = 520.000000
[Wed Jul 11 09:14:28 2012] Offset between fit and detection position for source 49 = 5.144271 pixels
[Wed Jul 11 09:14:28 2012] 513.851300 total counts/ 85.445300 bgd. counts: snr = 46.345914
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 5.144271 pixels
  Position = (337.3, 218.1) = 11 4 5.92 38 6 51.1
  Extent = 18.9 (18.9-18.9)", rotation angle = 0
  Source counts = 428.4 +/- 22.7
  Background counts = 85.4
  Rate = 0.04 +/- 0.002
[Wed Jul 11 09:14:28 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:28 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 09:14:28 2012] Source does appear to be extended
[Wed Jul 11 09:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:28 2012] Source is confused with source 50
[Wed Jul 11 12:09:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:09:20 2012] Initial guess for spatial extent in simple fitting = 18.88"
[Wed Jul 11 12:09:20 2012] source mask rpix=4.3, npix_max = 93, mask sum = 77, frac = 0.821
[Wed Jul 11 12:09:20 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 18.88"
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src29.ximg exists
[Wed Jul 11 17:23:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src29.csv
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed Jul 11 17:23:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src29.csv
[Wed Jul 11 17:23:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed Jul 11 17:23:42 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Wed Jul 11 23:21:21 2012] Spatial fit model total counts = 933.092000, observed total counts = 863.000000
[Wed Jul 11 23:21:21 2012] Offset between fit and detection position for source 49 = 3.399002 pixels
[Wed Jul 11 23:21:21 2012] Warning, changing simple spatial fit ID from 29 to 25
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 3.399002 pixels
  Position = (335.4, 220.9) = 11 4 6.64 38 7 3.3
  Extent = 35.8 (35.7-35.9)", rotation angle = 0
  Source counts = 906.4 +/- 30.1
  Background counts = 0.0
  Rate = 0.08 +/- 0.003
[Wed Jul 11 23:21:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:21 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:21 2012] Source does appear to be extended
[Wed Jul 11 23:21:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 09:36:57 2012] XMMSAS src. selection expression = ellipse(29128.866000, 19167.904000, 2149.548062, 2149.548062, 0.000000, X, Y)
[Thu Jul 12 09:36:57 2012] Writing source region out to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src49_src.reg
[Thu Jul 12 09:36:57 2012] Extracting stamp from image fullrun_mos1_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (212, 97) - (459, 344)
[Thu Jul 12 09:36:57 2012] XMMSAS bgd. selection expression = annulus(29128.866000, 19167.904000, 3582.580103, 7165.160206, X, Y) && !ellipse(24794.228000, 25902.071600, 3289.992095, 3289.992095, 0.000000, X, Y) && !ellipse(24261.366000, 25385.990000, 3471.072100, 3471.072100, 0.000000, X, Y) && !ellipse(24117.328400, 25815.026000, 3453.744099, 3453.744099, 0.000000, X, Y) && !ellipse(26475.614000, 27356.098000, 1168.744034, 1168.744034, 0.000000, X, Y) && !ellipse(21388.187958, 23611.275848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21767.234000, 26124.474000, 2042.696059, 2042.696059, 0.000000, X, Y) && !ellipse(21591.966000, 22687.694000, 1333.608038, 1333.608038, 0.000000, X, Y) && !ellipse(30880.482000, 16736.732000, 1723.800050, 1723.800050, 0.000000, X, Y) && !ellipse(30187.246000, 17743.034000, 1856.760053, 1856.760053, 0.000000, X, Y) && !ellipse(31301.812469, 16133.628769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28284.408844, 20275.637756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29800.470000, 18189.954000, 2216.376064, 2216.376064, 0.000000, X, Y) && !ellipse(26726.387207, 22693.939331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27710.494000, 21179.754000, 1482.872043, 1482.872043, 0.000000, X, Y) && !ellipse(31705.040000, 15687.542000, 1773.024051, 1773.024051, 0.000000, X, Y) && !ellipse(19375.240000, 25076.612000, 2705.232078, 2705.232078, 0.000000, X, Y) && !ellipse(26076.210358, 23014.645630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24560.124908, 22239.812500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27038.822000, 22120.480000, 1250.040036, 1250.040036, 0.000000, X, Y) && !ellipse(27239.731904, 21758.925854, 1315.344038, 893.106969, 46.760678, X, Y) && !ellipse(35053.764000, 11214.244000, 2130.800061, 2130.800061, 0.000000, X, Y) && !ellipse(32301.478000, 14899.676000, 1748.120050, 1748.120050, 0.000000, X, Y) && !ellipse(33031.832000, 13842.080000, 1687.312049, 1687.312049, 0.000000, X, Y) && !ellipse(35570.072000, 10465.946000, 1620.080047, 1620.080047, 0.000000, X, Y) && !ellipse(34388.556000, 12031.580000, 3919.360113, 3919.360113, 0.000000, X, Y) && !ellipse(33493.084000, 13268.758000, 1960.456056, 1960.456056, 0.000000, X, Y) && !ellipse(34042.124961, 12565.655027, 1991.448057, 386.095140, 54.491371, X, Y) && !ellipse(34812.128160, 11516.124200, 1991.448057, 469.113613, 54.565400, X, Y)
[Thu Jul 12 09:36:57 2012] Writing fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src49.gif
[Thu Jul 12 10:21:24 2012] Mean detx,y = (5774.73, 67.14) 
[Thu Jul 12 10:21:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 10:23:17 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 10:23:17 2012] Setting source spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Thu Jul 12 10:23:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Thu Jul 12 21:16:06 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:06 2012] Error reading totcts from fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Thu Jul 12 21:16:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:08 2012] Using photon index=1.80, rate=0.0812, arf fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src49.arf
[Thu Jul 12 21:16:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:08 2012] Updating source flux to 8.2e-13
[Thu Jul 12 21:16:14 2012] Flag c found in src. 49 procflags, skipping spectral fitting