[Tue Jul 10 22:01:19 2012] Detection parameters:
  Position = (248.5, 263.4) = 11 4 38.67 38 9 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.8 +/- 36.2
  Background counts = 73.0
  Rate = 0.02 +/- 0.004

[Tue Jul 10 22:01:20 2012] Off-axis axis estimate = 4.42'
[Wed Jul 11 01:21:41 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 01:21:41 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Wed Jul 11 01:21:41 2012] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.728
[Wed Jul 11 01:21:41 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.64"
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src18.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src18.csv
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src18.csv
[Wed Jul 11 04:11:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Jul 11 04:11:32 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Jul 11 09:14:28 2012] Spatial fit model total counts = 2348.220000, observed total counts = 2248.000000
[Wed Jul 11 09:14:28 2012] Offset between fit and detection position for source 41 = 2.089124 pixels
[Wed Jul 11 09:14:28 2012] Warning, changing simple spatial fit ID from 18 to 12
[Wed Jul 11 09:14:28 2012] 2502.978000 total counts/ 2278.250000 bgd. counts: snr = 4.708217
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 2.089124 pixels
  Position = (248.7, 261.3) = 11 4 38.58 38 9 59.2
  Extent = 16.7 (16.7-33.3)", rotation angle = 0
  Source counts = 224.7 +/- 50.0
  Background counts = 2278.2
  Rate = 0.02 +/- 0.004
[Wed Jul 11 09:14:28 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:28 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 09:14:28 2012] Source does appear to be extended
[Wed Jul 11 09:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:28 2012] Source is confused with source 64
[Wed Jul 11 12:09:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:09:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 12:09:20 2012] Initial guess for spatial extent in simple fitting = 16.67"
[Wed Jul 11 12:09:20 2012] source mask rpix=3.8, npix_max = 75, mask sum = 58, frac = 0.773
[Wed Jul 11 12:09:20 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 16.67"
[Wed Jul 11 17:23:40 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src18.ximg exists
[Wed Jul 11 17:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src18.csv
[Wed Jul 11 17:23:40 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed Jul 11 17:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src18.csv
[Wed Jul 11 17:23:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Jul 11 17:23:42 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Wed Jul 11 23:21:21 2012] Warning, spatial fit 18 centroid is now closest to src. 38
[Wed Jul 11 23:21:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:21 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:21 2012] Source does appear to be extended
[Wed Jul 11 23:21:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 09:36:56 2012] XMMSAS src. selection expression = ellipse(21591.966000, 22687.694000, 1000.206029, 1000.206029, 0.000000, X, Y)
[Thu Jul 12 09:36:56 2012] Writing source region out to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src41_src.reg
[Thu Jul 12 09:36:56 2012] Extracting stamp from image fullrun_mos1_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (191, 204) - (306, 319)
[Thu Jul 12 09:36:56 2012] XMMSAS bgd. selection expression = annulus(21591.966000, 22687.694000, 1667.010048, 3334.020096, X, Y) && !ellipse(24794.228000, 25902.071600, 3289.992095, 3289.992095, 0.000000, X, Y) && !ellipse(24261.366000, 25385.990000, 3471.072100, 3471.072100, 0.000000, X, Y) && !ellipse(24117.328400, 25815.026000, 3453.744099, 3453.744099, 0.000000, X, Y) && !ellipse(19511.913600, 22162.458000, 1034.256030, 1034.256030, 0.000000, X, Y) && !ellipse(19793.152000, 22374.643800, 1380.712040, 1380.712040, 0.000000, X, Y) && !ellipse(20683.458000, 23102.770000, 1268.408036, 1268.408036, 0.000000, X, Y) && !ellipse(21388.187958, 23611.275848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21767.234000, 26124.474000, 2042.696059, 2042.696059, 0.000000, X, Y) && !ellipse(20848.926000, 25610.946000, 1021.408029, 1021.408029, 0.000000, X, Y) && !ellipse(20207.834946, 23856.119995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19375.240000, 25076.612000, 2705.232078, 2705.232078, 0.000000, X, Y) && !ellipse(20577.580000, 25413.990000, 1352.616039, 1352.616039, 0.000000, X, Y) && !ellipse(24560.124908, 22239.812500, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 12 09:36:56 2012] Writing fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src41.gif
[Thu Jul 12 10:14:49 2012] Mean detx,y = (-1545.99, 3882.13) 
[Thu Jul 12 10:14:51 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 10:15:15 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 10:15:15 2012] Setting source spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Jul 12 10:15:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Thu Jul 12 21:16:06 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:06 2012] Error reading totcts from fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Jul 12 21:16:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:08 2012] Using photon index=1.80, rate=0.0201, arf fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src41.arf
[Thu Jul 12 21:16:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:08 2012] Updating source flux to 2.3e-13
[Thu Jul 12 21:16:14 2012] Flag c found in src. 41 procflags, skipping spectral fitting