[Tue Jul 10 22:01:19 2012] Detection parameters:
  Position = (330.2, 333.9) = 11 4 8.51 38 15 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 223.7 +/- 20.2
  Background counts = 25.1
  Rate = 0.03 +/- 0.002

[Tue Jul 10 22:01:20 2012] Off-axis axis estimate = 3.45'
[Wed Jul 11 01:21:41 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 01:21:41 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Wed Jul 11 01:21:41 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.108
[Wed Jul 11 01:21:41 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.15"
[Wed Jul 11 04:11:31 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src9.ximg exists
[Wed Jul 11 04:11:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src9.csv
[Wed Jul 11 04:11:31 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Jul 11 04:11:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src9.csv
[Wed Jul 11 04:11:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jul 11 04:11:32 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Jul 11 09:14:28 2012] Warning, spatial fit 9 centroid is now closest to src. 5
[Wed Jul 11 09:14:28 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:28 2012] Assessing source extent using major
[Wed Jul 11 09:14:28 2012] Source does appear to be extended
[Wed Jul 11 09:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:28 2012] Source is confused with source 5
[Wed Jul 11 12:09:20 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:09:20 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Wed Jul 11 12:09:20 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.108
[Wed Jul 11 12:09:20 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.15"
[Wed Jul 11 17:23:40 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jul 11 17:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src9.csv
[Wed Jul 11 17:23:40 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jul 11 17:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src9.csv
[Wed Jul 11 17:23:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jul 11 17:23:41 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Jul 11 23:21:21 2012] Spatial fit model total counts = 1644.310000, observed total counts = 1642.000000
[Wed Jul 11 23:21:21 2012] Offset between fit and detection position for source 4 = 3.326875 pixels
[Wed Jul 11 23:21:21 2012] Warning, changing simple spatial fit ID from 9 to 5
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 3.326875 pixels
  Position = (332.8, 336.0) = 11 4 7.56 38 15 24.0
  Extent = 32.3 (31.8-32.6)", rotation angle = 0
  Source counts = 1465.5 +/- 38.3
  Background counts = 0.0
  Rate = 0.1 +/- 0.003
[Wed Jul 11 23:21:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:21 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:21 2012] Source does appear to be extended
[Wed Jul 11 23:21:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 09:36:56 2012] Counts = 1465.510000, rescaling region sizes by 2.000000
[Thu Jul 12 09:36:56 2012] XMMSAS src. selection expression = ellipse(28904.444000, 29182.212000, 3881.220112, 3881.220112, 0.000000, X, Y)
[Thu Jul 12 09:36:56 2012] Writing source region out to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src4_src.reg
[Thu Jul 12 09:36:56 2012] Extracting stamp from image fullrun_mos1_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (110, 113) - (556, 559)
[Thu Jul 12 09:36:56 2012] XMMSAS bgd. selection expression = annulus(28904.444000, 29182.212000, 12937.400372, 25874.800745, X, Y) && !ellipse(24794.228000, 25902.071600, 3289.992095, 3289.992095, 0.000000, X, Y) && !ellipse(24261.366000, 25385.990000, 3471.072100, 3471.072100, 0.000000, X, Y) && !ellipse(24117.328400, 25815.026000, 3453.744099, 3453.744099, 0.000000, X, Y) && !ellipse(29397.523400, 29491.262000, 711.970420, 711.970420, 0.000000, X, Y) && !ellipse(28136.348000, 28595.188000, 1304.672038, 1304.672038, 0.000000, X, Y) && !ellipse(24258.269318, 28480.310181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27523.708000, 28092.628000, 1168.744034, 1168.744034, 0.000000, X, Y) && !ellipse(19511.913600, 22162.458000, 1034.256030, 1034.256030, 0.000000, X, Y) && !ellipse(19793.152000, 22374.643800, 1380.712040, 1380.712040, 0.000000, X, Y) && !ellipse(26475.614000, 27356.098000, 1168.744034, 1168.744034, 0.000000, X, Y) && !ellipse(20683.458000, 23102.770000, 1268.408036, 1268.408036, 0.000000, X, Y) && !ellipse(21388.187958, 23611.275848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21767.234000, 26124.474000, 2042.696059, 2042.696059, 0.000000, X, Y) && !ellipse(21591.966000, 22687.694000, 1333.608038, 1333.608038, 0.000000, X, Y) && !ellipse(30880.482000, 16736.732000, 1723.800050, 1723.800050, 0.000000, X, Y) && !ellipse(20848.926000, 25610.946000, 1021.408029, 1021.408029, 0.000000, X, Y) && !ellipse(30187.246000, 17743.034000, 1856.760053, 1856.760053, 0.000000, X, Y) && !ellipse(31301.812469, 16133.628769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28284.408844, 20275.637756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29800.470000, 18189.954000, 2216.376064, 2216.376064, 0.000000, X, Y) && !ellipse(24105.801605, 29523.481812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26726.387207, 22693.939331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29128.866000, 19167.904000, 2866.064082, 2866.064082, 0.000000, X, Y) && !ellipse(27710.494000, 21179.754000, 1482.872043, 1482.872043, 0.000000, X, Y) && !ellipse(20207.834946, 23856.119995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31705.040000, 15687.542000, 1773.024051, 1773.024051, 0.000000, X, Y) && !ellipse(19375.240000, 25076.612000, 2705.232078, 2705.232078, 0.000000, X, Y) && !ellipse(19194.944000, 32486.308000, 1603.736046, 987.152028, 220.209000, X, Y) && !ellipse(26076.210358, 23014.645630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20577.580000, 25413.990000, 1352.616039, 1352.616039, 0.000000, X, Y) && !ellipse(24560.124908, 22239.812500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27038.822000, 22120.480000, 1250.040036, 1250.040036, 0.000000, X, Y) && !ellipse(27239.731904, 21758.925854, 1315.344038, 893.106969, 46.760678, X, Y) && !ellipse(35053.764000, 11214.244000, 2130.800061, 2130.800061, 0.000000, X, Y) && !ellipse(32301.478000, 14899.676000, 1748.120050, 1748.120050, 0.000000, X, Y) && !ellipse(23152.558000, 28940.802000, 1308.768038, 1308.768038, 0.000000, X, Y) && !ellipse(21302.196000, 28497.424000, 1320.608038, 1320.608038, 0.000000, X, Y) && !ellipse(33031.832000, 13842.080000, 1687.312049, 1687.312049, 0.000000, X, Y) && !ellipse(35570.072000, 10465.946000, 1620.080047, 1620.080047, 0.000000, X, Y) && !ellipse(34388.556000, 12031.580000, 3919.360113, 3919.360113, 0.000000, X, Y) && !ellipse(33493.084000, 13268.758000, 1960.456056, 1960.456056, 0.000000, X, Y) && !ellipse(34042.124961, 12565.655027, 1991.448057, 386.095140, 54.491371, X, Y) && !ellipse(34812.128160, 11516.124200, 1991.448057, 469.113613, 54.565400, X, Y)
[Thu Jul 12 09:36:56 2012] Writing fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src4.gif
[Thu Jul 12 10:01:20 2012] Mean detx,y = (-2049.75, -3679.52) 
[Thu Jul 12 10:01:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 10:12:20 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 10:12:20 2012] Setting source spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 12 10:12:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jul 12 21:16:05 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:05 2012] Error reading totcts from fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 12 21:16:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:08 2012] Using photon index=1.80, rate=0.131, arf fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src4.arf
[Thu Jul 12 21:16:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:08 2012] Updating source flux to 1.4e-12
[Thu Jul 12 21:16:14 2012] Flag c found in src. 4 procflags, skipping spectral fitting