[Tue Jul 10 22:01:19 2012] Detection parameters:
  Position = (232.1, 292.8) = 11 4 44.72 38 12 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.3 +/- 17.1
  Background counts = 58.7
  Rate = 0.01 +/- 0.002

[Tue Jul 10 22:01:20 2012] Off-axis axis estimate = 4.83'
[Wed Jul 11 01:21:41 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 01:21:41 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Wed Jul 11 01:21:41 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.975
[Wed Jul 11 01:21:41 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 8.84"
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src33.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src33.csv
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src33.csv
[Wed Jul 11 04:11:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 04:11:33 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Jul 11 04:11:33 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Jul 11 04:11:33 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Wed Jul 11 09:14:28 2012] Spatial fit model total counts = 1009.090000, observed total counts = 1005.000000
[Wed Jul 11 09:14:28 2012] Offset between fit and detection position for source 36 = 9.305045 pixels
[Wed Jul 11 09:14:28 2012] 1025.669000 total counts/ 891.423000 bgd. counts: snr = 4.496343
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 9.305045 pixels
  Position = (224.2, 287.8) = 11 4 47.63 38 11 54.3
  Extent = 17.7 (17.6-35.4)", rotation angle = 0
  Source counts = 134.2 +/- 32.0
  Background counts = 891.4
  Rate = 0.01 +/- 0.003
[Wed Jul 11 09:14:28 2012] Source 36 is offset by -7.818966 and -4.618322 pixels which is larger than
2 X fitted extent = 1.960143 x 1.960143, not incorporating fit results
[Wed Jul 11 09:14:28 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:28 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 09:14:28 2012] Source does appear to be extended
[Wed Jul 11 09:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 12:09:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:09:20 2012] Initial guess for spatial extent in simple fitting = 17.68"
[Wed Jul 11 12:09:20 2012] source mask rpix=4.1, npix_max = 83, mask sum = 81, frac = 0.972
[Wed Jul 11 12:09:20 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 17.68"
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src32.ximg exists
[Wed Jul 11 17:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src32.csv
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src32_1.ximg exists
[Wed Jul 11 17:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src32.csv
[Wed Jul 11 17:23:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Wed Jul 11 17:23:42 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Wed Jul 11 23:21:21 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 11.424581 pixels away
[Wed Jul 11 23:21:21 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 16.198354 pixels away
[Wed Jul 11 23:21:21 2012] Spatial fit model total counts = 2609.840000, observed total counts = 2610.000000
[Wed Jul 11 23:21:21 2012] Offset between fit and detection position for source 36 = 1.383117 pixels
[Wed Jul 11 23:21:21 2012] Warning, changing simple spatial fit ID from 32 to 36
[Wed Jul 11 23:21:21 2012] 2605.420000 total counts/ 1953.920000 bgd. counts: snr = 14.738763
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 1.383117 pixels
  Position = (223.3, 288.8) = 11 4 47.99 38 11 58.6
  Extent = 33.8 (23.2-67.6)", rotation angle = 0
  Source counts = 651.5 +/- 51.0
  Background counts = 1953.9
  Rate = 0.06 +/- 0.005
[Wed Jul 11 23:21:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:21 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:21 2012] Source does appear to be extended
[Wed Jul 11 23:21:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 23:21:21 2012] Source is confused with source 37
[Thu Jul 12 09:36:57 2012] XMMSAS src. selection expression = ellipse(19375.240000, 25076.612000, 2028.924058, 2028.924058, 0.000000, X, Y)
[Thu Jul 12 09:36:57 2012] Writing source region out to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src36_src.reg
[Thu Jul 12 09:36:57 2012] Extracting stamp from image fullrun_mos1_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (107, 172) - (340, 405)
[Thu Jul 12 09:36:57 2012] XMMSAS bgd. selection expression = annulus(19375.240000, 25076.612000, 3381.540097, 6763.080195, X, Y) && !ellipse(24794.228000, 25902.071600, 3289.992095, 3289.992095, 0.000000, X, Y) && !ellipse(24261.366000, 25385.990000, 3471.072100, 3471.072100, 0.000000, X, Y) && !ellipse(24117.328400, 25815.026000, 3453.744099, 3453.744099, 0.000000, X, Y) && !ellipse(24258.269318, 28480.310181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19511.913600, 22162.458000, 1034.256030, 1034.256030, 0.000000, X, Y) && !ellipse(19793.152000, 22374.643800, 1380.712040, 1380.712040, 0.000000, X, Y) && !ellipse(26475.614000, 27356.098000, 1168.744034, 1168.744034, 0.000000, X, Y) && !ellipse(20683.458000, 23102.770000, 1268.408036, 1268.408036, 0.000000, X, Y) && !ellipse(21388.187958, 23611.275848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21767.234000, 26124.474000, 2042.696059, 2042.696059, 0.000000, X, Y) && !ellipse(21591.966000, 22687.694000, 1333.608038, 1333.608038, 0.000000, X, Y) && !ellipse(20848.926000, 25610.946000, 1021.408029, 1021.408029, 0.000000, X, Y) && !ellipse(24105.801605, 29523.481812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26726.387207, 22693.939331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20207.834946, 23856.119995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19194.944000, 32486.308000, 1603.736046, 987.152028, 220.209000, X, Y) && !ellipse(26076.210358, 23014.645630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20577.580000, 25413.990000, 1352.616039, 1352.616039, 0.000000, X, Y) && !ellipse(24560.124908, 22239.812500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27038.822000, 22120.480000, 1250.040036, 1250.040036, 0.000000, X, Y) && !ellipse(27239.731904, 21758.925854, 1315.344038, 893.106969, 46.760678, X, Y) && !ellipse(23152.558000, 28940.802000, 1308.768038, 1308.768038, 0.000000, X, Y) && !ellipse(21302.196000, 28497.424000, 1320.608038, 1320.608038, 0.000000, X, Y)
[Thu Jul 12 09:36:57 2012] Writing fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src36.gif
[Thu Jul 12 10:25:00 2012] Mean detx,y = (-4289.47, 3878.78) 
[Thu Jul 12 10:25:02 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 10:26:24 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 10:26:24 2012] Setting source spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Jul 12 10:26:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Thu Jul 12 21:16:06 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:06 2012] Error reading totcts from fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Jul 12 21:16:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:08 2012] Using photon index=1.80, rate=0.0584, arf fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src36.arf
[Thu Jul 12 21:16:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:08 2012] Updating source flux to 5.7e-13
[Thu Jul 12 21:16:14 2012] Flag b found in src. 36 procflags, skipping spectral fitting
[Thu Jul 12 21:16:14 2012] Flag c found in src. 36 procflags, skipping spectral fitting