[Tue Jul 10 22:01:19 2012] Detection parameters:
  Position = (311.1, 319.0) = 11 4 15.57 38 14 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 224.8 +/- 22.9
  Background counts = 53.9
  Rate = 0.02 +/- 0.002

[Tue Jul 10 22:01:20 2012] Off-axis axis estimate = 1.75'
[Wed Jul 11 01:21:41 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 01:21:41 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Jul 11 01:21:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Wed Jul 11 01:21:41 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.30"
[Wed Jul 11 04:11:31 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jul 11 04:11:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src11.csv
[Wed Jul 11 04:11:31 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jul 11 04:11:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src11.csv
[Wed Jul 11 04:11:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jul 11 04:11:32 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Jul 11 09:14:28 2012] Source 25 is offset by -5.300693 and -4.431435 pixels which is larger than
2 X fitted extent = 8.656092 x 2.192630, not incorporating fit results
[Wed Jul 11 09:14:28 2012] Warning, spatial fit 11 centroid is now closest to src. 7
[Wed Jul 11 09:14:28 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:28 2012] Assessing source extent using major
[Wed Jul 11 09:14:28 2012] Source does appear to be extended
[Wed Jul 11 09:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:28 2012] Source is confused with source 7
[Wed Jul 11 12:09:20 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:09:20 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Jul 11 12:09:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Wed Jul 11 12:09:20 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.30"
[Wed Jul 11 17:23:40 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src11.ximg exists
[Wed Jul 11 17:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src11.csv
[Wed Jul 11 17:23:40 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Jul 11 17:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src11.csv
[Wed Jul 11 17:23:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Jul 11 17:23:41 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Jul 11 23:21:21 2012] Spatial fit model total counts = 1362.350000, observed total counts = 1357.000000
[Wed Jul 11 23:21:21 2012] Offset between fit and detection position for source 25 = 7.414278 pixels
[Wed Jul 11 23:21:21 2012] 1437.667000 total counts/ 899.892000 bgd. counts: snr = 17.926909
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 7.414278 pixels
  Position = (304.9, 315.0) = 11 4 17.87 38 13 52.7
  Extent = 14.6 (14.6-29.2)", rotation angle = 0
  Source counts = 537.8 +/- 37.9
  Background counts = 899.9
  Rate = 0.05 +/- 0.003
[Wed Jul 11 23:21:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:21 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:21 2012] Source does appear to be extended
[Wed Jul 11 23:21:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 09:36:56 2012] XMMSAS src. selection expression = ellipse(26475.614000, 27356.098000, 876.558025, 876.558025, 0.000000, X, Y)
[Thu Jul 12 09:36:56 2012] Writing source region out to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src25_src.reg
[Thu Jul 12 09:36:56 2012] Extracting stamp from image fullrun_mos1_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (254, 265) - (355, 365)
[Thu Jul 12 09:36:56 2012] XMMSAS bgd. selection expression = annulus(26475.614000, 27356.098000, 1460.930042, 2921.860084, X, Y) && !ellipse(24794.228000, 25902.071600, 3289.992095, 3289.992095, 0.000000, X, Y) && !ellipse(24261.366000, 25385.990000, 3471.072100, 3471.072100, 0.000000, X, Y) && !ellipse(24117.328400, 25815.026000, 3453.744099, 3453.744099, 0.000000, X, Y) && !ellipse(29397.523400, 29491.262000, 711.970420, 711.970420, 0.000000, X, Y) && !ellipse(28136.348000, 28595.188000, 1304.672038, 1304.672038, 0.000000, X, Y) && !ellipse(24258.269318, 28480.310181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27523.708000, 28092.628000, 1168.744034, 1168.744034, 0.000000, X, Y) && !ellipse(28904.444000, 29182.212000, 2587.480074, 2587.480074, 0.000000, X, Y) && !ellipse(21767.234000, 26124.474000, 2042.696059, 2042.696059, 0.000000, X, Y) && !ellipse(24105.801605, 29523.481812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23152.558000, 28940.802000, 1308.768038, 1308.768038, 0.000000, X, Y)
[Thu Jul 12 09:36:56 2012] Writing fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src25.gif
[Thu Jul 12 10:13:06 2012] Mean detx,y = (-2197.42, -2377.34) 
[Thu Jul 12 10:13:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 10:13:20 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 10:13:21 2012] Setting source spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu Jul 12 10:13:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Thu Jul 12 21:16:06 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:06 2012] Error reading totcts from fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu Jul 12 21:16:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:08 2012] Using photon index=1.80, rate=0.0482, arf fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src25.arf
[Thu Jul 12 21:16:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:08 2012] Updating source flux to 4.9e-13
[Thu Jul 12 21:16:14 2012] Flag b found in src. 25 procflags, skipping spectral fitting
[Thu Jul 12 21:16:14 2012] Flag c found in src. 25 procflags, skipping spectral fitting