[Tue Jul 10 22:01:19 2012] Detection parameters:
  Position = (261.2, 329.2) = 11 4 34.00 38 15 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.7 +/- 16.0
  Background counts = 61.0
  Rate = 0.008 +/- 0.002

[Tue Jul 10 22:01:20 2012] Off-axis axis estimate = 3.50'
[Wed Jul 11 01:21:41 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 01:21:41 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Wed Jul 11 01:21:41 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.882
[Wed Jul 11 01:21:41 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 8.18"
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src43.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src43.csv
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src43_1.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src43.csv
[Wed Jul 11 04:11:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 04:11:33 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Wed Jul 11 04:11:33 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Wed Jul 11 04:11:33 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Wed Jul 11 09:14:28 2012] Warning, spatial fit 43 centroid is now closest to src. 24
[Wed Jul 11 09:14:28 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:28 2012] Assessing source extent using major
[Wed Jul 11 09:14:28 2012] Source does appear to be extended
[Wed Jul 11 09:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:28 2012] Source is confused with source 24
[Wed Jul 11 12:09:20 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:09:20 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Wed Jul 11 12:09:20 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.882
[Wed Jul 11 12:09:20 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 8.18"
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src42.ximg exists
[Wed Jul 11 17:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src42.csv
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src42_1.ximg exists
[Wed Jul 11 17:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src42.csv
[Wed Jul 11 17:23:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Wed Jul 11 17:23:42 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Wed Jul 11 23:21:21 2012] Spatial fit model total counts = 904.506000, observed total counts = 858.000000
[Wed Jul 11 23:21:21 2012] Offset between fit and detection position for source 20 = 6.783433 pixels
[Wed Jul 11 23:21:21 2012] 804.001000 total counts/ 459.041000 bgd. counts: snr = 16.100635
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 6.783433 pixels
  Position = (266.7, 333.2) = 11 4 31.98 38 15 11.9
  Extent = 16.4 (16.3-32.7)", rotation angle = 0
  Source counts = 345.0 +/- 28.4
  Background counts = 459.0
  Rate = 0.03 +/- 0.003
[Wed Jul 11 23:21:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:21 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:21 2012] Source does appear to be extended
[Wed Jul 11 23:21:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 09:36:57 2012] XMMSAS src. selection expression = ellipse(23152.558000, 28940.802000, 981.576028, 981.576028, 0.000000, X, Y)
[Thu Jul 12 09:36:57 2012] Writing source region out to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src20_src.reg
[Thu Jul 12 09:36:57 2012] Extracting stamp from image fullrun_mos1_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (210, 277) - (323, 390)
[Thu Jul 12 09:36:57 2012] XMMSAS bgd. selection expression = annulus(23152.558000, 28940.802000, 1635.960047, 3271.920094, X, Y) && !ellipse(24794.228000, 25902.071600, 3289.992095, 3289.992095, 0.000000, X, Y) && !ellipse(24261.366000, 25385.990000, 3471.072100, 3471.072100, 0.000000, X, Y) && !ellipse(24117.328400, 25815.026000, 3453.744099, 3453.744099, 0.000000, X, Y) && !ellipse(24258.269318, 28480.310181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27523.708000, 28092.628000, 1168.744034, 1168.744034, 0.000000, X, Y) && !ellipse(28904.444000, 29182.212000, 2587.480074, 2587.480074, 0.000000, X, Y) && !ellipse(26475.614000, 27356.098000, 1168.744034, 1168.744034, 0.000000, X, Y) && !ellipse(21767.234000, 26124.474000, 2042.696059, 2042.696059, 0.000000, X, Y) && !ellipse(20848.926000, 25610.946000, 1021.408029, 1021.408029, 0.000000, X, Y) && !ellipse(24105.801605, 29523.481812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19375.240000, 25076.612000, 2705.232078, 2705.232078, 0.000000, X, Y) && !ellipse(19194.944000, 32486.308000, 1603.736046, 987.152028, 220.209000, X, Y) && !ellipse(20577.580000, 25413.990000, 1352.616039, 1352.616039, 0.000000, X, Y) && !ellipse(21302.196000, 28497.424000, 1320.608038, 1320.608038, 0.000000, X, Y)
[Thu Jul 12 09:36:57 2012] Writing fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src20.gif
[Thu Jul 12 10:30:05 2012] Mean detx,y = (-5438.76, -949.40) 
[Thu Jul 12 10:30:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 10:30:39 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 10:30:39 2012] Setting source spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jul 12 10:30:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Jul 12 21:16:07 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:07 2012] Error reading totcts from fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jul 12 21:16:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:09 2012] Using photon index=1.80, rate=0.0309, arf fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src20.arf
[Thu Jul 12 21:16:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:09 2012] Updating source flux to 3.5e-13
[Thu Jul 12 21:16:14 2012] Flag c found in src. 20 procflags, skipping spectral fitting