[Tue Jul 10 22:01:19 2012] Detection parameters:
  Position = (277.6, 339.9) = 11 4 27.93 38 15 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.9 +/- 17.1
  Background counts = 52.4
  Rate = 0.02 +/- 0.002

[Tue Jul 10 22:01:20 2012] Off-axis axis estimate = 3.36'
[Wed Jul 11 01:21:41 2012] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 01:21:41 2012] Initial guess for spatial extent in simple fitting = 8.11"
[Wed Jul 11 01:21:41 2012] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.850
[Wed Jul 11 01:21:41 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 8.11"
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src26.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src26.csv
[Wed Jul 11 04:11:32 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed Jul 11 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src26.csv
[Wed Jul 11 04:11:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 04:11:33 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed Jul 11 04:11:33 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed Jul 11 04:11:33 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Wed Jul 11 09:14:28 2012] Source 18 is offset by -0.987411 and 5.161607 pixels which is larger than
2 X fitted extent = 2.910805 x 2.910805, not incorporating fit results
[Wed Jul 11 09:14:28 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:28 2012] Assessing source extent using major
[Wed Jul 11 09:14:28 2012] Source does appear to be extended
[Wed Jul 11 09:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 12:09:20 2012] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:09:20 2012] Initial guess for spatial extent in simple fitting = 8.11"
[Wed Jul 11 12:09:20 2012] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.850
[Wed Jul 11 12:09:20 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 8.11"
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src26.ximg exists
[Wed Jul 11 17:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src26.csv
[Wed Jul 11 17:23:41 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed Jul 11 17:23:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src26.csv
[Wed Jul 11 17:23:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed Jul 11 17:23:42 2012] fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Jul 11 17:23:42 2012] Fit fullrun_mos1_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Wed Jul 11 23:21:21 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 10.032725 pixels away
[Wed Jul 11 23:21:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:21 2012] Assessing source extent using major
[Wed Jul 11 23:21:21 2012] Source does appear to be extended
[Wed Jul 11 23:21:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 09:36:57 2012] XMMSAS src. selection expression = ellipse(24105.801605, 29523.481812, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 09:36:57 2012] Writing source region out to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src18_src.reg
[Thu Jul 12 09:36:57 2012] Extracting stamp from image fullrun_mos1_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (240, 302) - (315, 377)
[Thu Jul 12 09:36:57 2012] XMMSAS bgd. selection expression = annulus(24105.801605, 29523.481812, 1087.500000, 2175.000000, X, Y) && !ellipse(24794.228000, 25902.071600, 3289.992095, 3289.992095, 0.000000, X, Y) && !ellipse(24261.366000, 25385.990000, 3471.072100, 3471.072100, 0.000000, X, Y) && !ellipse(24117.328400, 25815.026000, 3453.744099, 3453.744099, 0.000000, X, Y) && !ellipse(24258.269318, 28480.310181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26475.614000, 27356.098000, 1168.744034, 1168.744034, 0.000000, X, Y) && !ellipse(21767.234000, 26124.474000, 2042.696059, 2042.696059, 0.000000, X, Y) && !ellipse(19375.240000, 25076.612000, 2705.232078, 2705.232078, 0.000000, X, Y) && !ellipse(23152.558000, 28940.802000, 1308.768038, 1308.768038, 0.000000, X, Y) && !ellipse(21302.196000, 28497.424000, 1320.608038, 1320.608038, 0.000000, X, Y)
[Thu Jul 12 09:36:57 2012] Writing fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src18.gif
[Thu Jul 12 10:20:18 2012] Mean detx,y = (-5316.13, -2016.28) 
[Thu Jul 12 10:20:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 10:20:41 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 10:20:42 2012] Setting source spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Jul 12 10:20:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Jul 12 14:18:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 14:18:17 2012] rmf not generated due to insufficient counts
[Thu Jul 12 21:16:06 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:06 2012] Error reading totcts from fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Jul 12 21:16:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:08 2012] Using photon index=1.80, rate=0.015, arf fullrun_mos1_xmm0136540801_pi300-10000_pass1_cl_src18.arf
[Thu Jul 12 21:16:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:08 2012] Updating source flux to 1.9e-13
[Thu Jul 12 21:16:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting