[Tue Jun 26 10:39:09 2012] Detection parameters:
  Position = (225.4, 373.0) = 11 4 53.80 38 19 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11941.9 +/- 143.9
  Background counts = 65.6
  Rate = 0.5 +/- 0.007

[Tue Jun 26 10:39:14 2012] Off-axis axis estimate = 7.57'
[Tue Jun 26 10:45:54 2012] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 10:45:54 2012] Initial guess for spatial extent in simple fitting = 10.21"
[Tue Jun 26 10:45:54 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.925
[Tue Jun 26 10:45:54 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.21"
[Wed Jun 27 06:23:16 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jun 27 06:23:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src7.csv
[Wed Jun 27 06:23:16 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jun 27 06:23:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src7.csv
[Wed Jun 27 06:23:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:23:19 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jun 27 06:23:19 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jun 27 06:23:19 2012] Fit fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Jun 27 09:21:31 2012] Spatial fit model total counts = 34242.900000, observed total counts = 34635.000000
[Wed Jun 27 09:21:31 2012] Offset between fit and detection position for source 7 = 1.224497 pixels
[Wed Jun 27 09:21:31 2012] Warning, changing simple spatial fit ID from 7 to 6
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.224497 pixels
  Position = (225.9, 371.9) = 11 4 53.63 38 19 34.2
  Extent = 18.9 (18.9-18.9)", rotation angle = 0
  Source counts = 34850.6 +/- 186.7
  Background counts = 0.0
  Rate = 2 +/- 0.01
 Deleting source due to low signal-to-noise ratio