[Tue Jun 26 10:39:12 2012] Detection parameters:
  Position = (250.0, 253.6) = 11 4 44.69 38 10 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 448.6 +/- 29.7
  Background counts = 175.6
  Rate = 0.04 +/- 0.003

[Tue Jun 26 10:39:14 2012] Off-axis axis estimate = 4.79'
[Tue Jun 26 10:45:54 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 10:45:54 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Tue Jun 26 10:45:54 2012] source mask rpix=2.0, npix_max = 25, mask sum = 13, frac = 0.508
[Tue Jun 26 10:45:54 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 8.82"
[Wed Jun 27 06:23:18 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src66.ximg exists
[Wed Jun 27 06:23:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src66.csv
[Wed Jun 27 06:23:18 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src66_1.ximg exists
[Wed Jun 27 06:23:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src66.csv
[Wed Jun 27 06:23:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:23:20 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Wed Jun 27 06:23:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src66.csv
[Wed Jun 27 06:23:20 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Wed Jun 27 06:23:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src66.csv
[Wed Jun 27 06:23:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:21:31 2012] Warning, spatial fit 66 centroid is now closest to src. 63
[Wed Jun 27 09:21:31 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:21:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:21:31 2012] Assessing source extent using major
[Wed Jun 27 09:21:31 2012] Source does appear to be extended
[Wed Jun 27 09:21:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:21:31 2012] Source is confused with source 64
[Wed Jun 27 09:21:56 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 09:21:56 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Wed Jun 27 09:21:56 2012] source mask rpix=2.0, npix_max = 25, mask sum = 13, frac = 0.508
[Wed Jun 27 09:21:56 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 8.82"
[Wed Jun 27 22:43:50 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src48.ximg exists
[Wed Jun 27 22:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src48.csv
[Wed Jun 27 22:43:50 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src48_1.ximg exists
[Wed Jun 27 22:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src48.csv
[Wed Jun 27 22:43:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 22:43:51 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Wed Jun 27 22:43:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src48.csv
[Wed Jun 27 22:43:51 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Wed Jun 27 22:43:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src48.csv
[Wed Jun 27 22:43:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 03:21:12 2012] Spatial fit model total counts = 4114.980000, observed total counts = 3115.000000
[Thu Jun 28 03:21:12 2012] Poor agreement between spatial fit and data for source 67
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 28 03:21:12 2012] Spatial fit model total counts = 3166.110000, observed total counts = 2616.000000
[Thu Jun 28 03:21:12 2012] Poor agreement between spatial fit and data for source 67
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 28 03:21:12 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 03:21:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 03:21:12 2012] Assessing source extent using major
[Thu Jun 28 03:21:12 2012] Source does appear to be extended
[Thu Jun 28 03:21:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 03:21:37 2012] XMMSAS src. selection expression = ellipse(21697.782959, 22014.681946, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 28 03:21:37 2012] Writing source region out to fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src67_src.reg
[Thu Jun 28 03:21:37 2012] Extracting stamp from image fullrun_pn_xmm0136540401_pi300-10000_cl_sm2.00.img.gz, (212, 216) - (287, 291)
[Thu Jun 28 03:21:37 2012] XMMSAS bgd. selection expression = annulus(21697.782959, 22014.681946, 1087.500000, 2175.000000, X, Y) && !ellipse(25371.841705, 23513.249512, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25371.931976, 24415.054108, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22374.564000, 28500.056000, 5095.680147, 5095.680147, 0.000000, X, Y) && !ellipse(23146.598000, 27469.264000, 3814.248110, 3814.248110, 0.000000, X, Y) && !ellipse(23603.884000, 26798.644000, 6400.728184, 6400.728184, 0.000000, X, Y) && !ellipse(23858.732000, 26391.814000, 3404.208098, 3404.208098, 0.000000, X, Y) && !ellipse(25869.975647, 22195.923538, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21873.163574, 23239.672638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21482.955246, 22392.832458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22312.488617, 22460.695007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23179.929169, 21129.049133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22327.263855, 21883.909805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23048.717621, 21481.699417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21392.066956, 21364.517044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23283.581512, 20425.668152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24224.646000, 20188.215600, 1291.152037, 1118.192032, 86.356000, X, Y) && !ellipse(24176.806000, 20091.480000, 1481.200043, 1481.200043, 0.000000, X, Y)
[Thu Jun 28 03:21:37 2012] Writing fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src67.gif
[Thu Jun 28 07:09:46 2012] Mean detx,y = (4538.93, 813.31) 
[Thu Jun 28 07:09:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 07:10:17 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 07:10:18 2012] Setting source spectrum file to fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Thu Jun 28 07:10:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Thu Jun 28 20:46:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 20:46:44 2012] rmf not generated due to insufficient counts
[Thu Jun 28 23:25:36 2012] Updating aperture counts using extracted products
[Thu Jun 28 23:25:36 2012] Error reading totcts from fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Thu Jun 28 23:25:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:25:37 2012] Using photon index=1.80, rate=0.0384, arf fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src67.arf
[Thu Jun 28 23:25:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:25:37 2012] Updating source flux to 1.3e-13
[Thu Jun 28 23:29:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting