[Tue Jun 26 10:39:09 2012] Detection parameters:
  Position = (222.1, 377.0) = 11 4 55.02 38 19 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14549.3 +/- 144.4
  Background counts = 62.0
  Rate = 0.7 +/- 0.007

[Tue Jun 26 10:39:14 2012] Off-axis axis estimate = 7.94'
[Tue Jun 26 10:45:54 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 10:45:54 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Tue Jun 26 10:45:54 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.077
[Tue Jun 26 10:45:54 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.40"
[Wed Jun 27 06:23:16 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src6.ximg exists
[Wed Jun 27 06:23:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src6.csv
[Wed Jun 27 06:23:16 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Jun 27 06:23:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src6.csv
[Wed Jun 27 06:23:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:23:19 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Jun 27 06:23:19 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Jun 27 06:23:19 2012] Fit fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Jun 27 09:21:31 2012] Spatial fit model total counts = 34201.400000, observed total counts = 34711.000000
[Wed Jun 27 09:21:31 2012] Offset between fit and detection position for source 6 = 2.151804 pixels
[Wed Jun 27 09:21:31 2012] Warning, changing simple spatial fit ID from 6 to 5
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 2.151804 pixels
  Position = (220.8, 378.7) = 11 4 55.52 38 20 3.9
  Extent = 19.2 (19.2-19.3)", rotation angle = 0
  Source counts = 34884.1 +/- 186.8
  Background counts = 0.0
  Rate = 2 +/- 0.01
 Deleting source due to low signal-to-noise ratio