[Tue Jun 26 10:39:12 2012] Detection parameters:
  Position = (325.6, 290.2) = 11 4 16.76 38 13 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 603.1 +/- 36.4
  Background counts = 223.0
  Rate = 0.04 +/- 0.002

[Tue Jun 26 10:39:14 2012] Off-axis axis estimate = 2.06'
[Tue Jun 26 10:45:54 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 10:45:54 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Tue Jun 26 10:45:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.663
[Tue Jun 26 10:45:54 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 7.46"
[Wed Jun 27 06:23:17 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src54.ximg exists
[Wed Jun 27 06:23:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src54.csv
[Wed Jun 27 06:23:17 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src54_1.ximg exists
[Wed Jun 27 06:23:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src54.csv
[Wed Jun 27 06:23:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:23:20 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Wed Jun 27 06:23:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src54.csv
[Wed Jun 27 06:23:20 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Wed Jun 27 06:23:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src54.csv
[Wed Jun 27 06:23:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:21:31 2012] Source 55 is offset by 7.507455 and 5.722197 pixels which is larger than
2 X fitted extent = 2.746704 x 2.746704, not incorporating fit results
[Wed Jun 27 09:21:31 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:21:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:21:31 2012] Assessing source extent using major
[Wed Jun 27 09:21:31 2012] Source does appear to be extended
[Wed Jun 27 09:21:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:21:56 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 09:21:56 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Wed Jun 27 09:21:56 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.663
[Wed Jun 27 09:21:56 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 7.46"
[Wed Jun 27 22:43:49 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src41.ximg exists
[Wed Jun 27 22:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src41.csv
[Wed Jun 27 22:43:49 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed Jun 27 22:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src41.csv
[Wed Jun 27 22:43:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 22:43:51 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed Jun 27 22:43:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src41.csv
[Wed Jun 27 22:43:51 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed Jun 27 22:43:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src41.csv
[Wed Jun 27 22:43:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 03:21:12 2012] Source 55 is offset by 7.507455 and 5.736656 pixels which is larger than
2 X fitted extent = 2.743021 x 2.743021, not incorporating fit results
[Thu Jun 28 03:21:12 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 03:21:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 03:21:12 2012] Assessing source extent using major
[Thu Jun 28 03:21:12 2012] Source does appear to be extended
[Thu Jun 28 03:21:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 03:21:37 2012] XMMSAS src. selection expression = ellipse(28282.948578, 25202.695099, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 28 03:21:37 2012] Writing source region out to fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src55_src.reg
[Thu Jun 28 03:21:37 2012] Extracting stamp from image fullrun_pn_xmm0136540401_pi300-10000_cl_sm2.00.img.gz, (288, 253) - (363, 328)
[Thu Jun 28 03:21:37 2012] XMMSAS bgd. selection expression = annulus(28282.948578, 25202.695099, 1087.500000, 2175.000000, X, Y) && !ellipse(25371.841705, 23513.249512, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25371.931976, 24415.054108, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21770.924000, 29383.502000, 5186.376149, 5186.376149, 0.000000, X, Y) && !ellipse(22374.564000, 28500.056000, 5095.680147, 5095.680147, 0.000000, X, Y) && !ellipse(22892.746000, 27816.074000, 3469.128100, 3469.128100, 0.000000, X, Y) && !ellipse(23146.598000, 27469.264000, 3814.248110, 3814.248110, 0.000000, X, Y) && !ellipse(23603.884000, 26798.644000, 6400.728184, 6400.728184, 0.000000, X, Y) && !ellipse(23858.732000, 26391.814000, 3404.208098, 3404.208098, 0.000000, X, Y) && !ellipse(26697.073029, 24330.887024, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28134.877594, 23923.679871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27856.472000, 23017.918000, 3683.832106, 3683.832106, 0.000000, X, Y) && !ellipse(26743.326294, 22881.424225, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25869.975647, 22195.923538, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27006.819366, 28034.204193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26140.679779, 28066.932739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26896.484314, 27207.364349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27052.002655, 26610.219055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28081.551331, 26562.447113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27671.346000, 25983.860000, 1179.280034, 1179.280034, 0.000000, X, Y)
[Thu Jun 28 03:21:37 2012] Writing fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src55.gif
[Thu Jun 28 07:06:01 2012] Mean detx,y = (-2497.52, -486.26) 
[Thu Jun 28 07:06:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 07:06:27 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 07:06:28 2012] Setting source spectrum file to fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Thu Jun 28 07:06:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Thu Jun 28 20:42:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 20:42:58 2012] rmf not generated due to insufficient counts
[Thu Jun 28 23:25:36 2012] Updating aperture counts using extracted products
[Thu Jun 28 23:25:36 2012] Error reading totcts from fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Thu Jun 28 23:25:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:25:37 2012] Using photon index=1.80, rate=0.041, arf fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src55.arf
[Thu Jun 28 23:25:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:25:37 2012] Updating source flux to 1.4e-13
[Thu Jun 28 23:29:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting