[Tue Jun 26 10:39:11 2012] Detection parameters:
  Position = (309.7, 313.3) = 11 4 22.64 38 15 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 377.5 +/- 31.7
  Background counts = 201.6
  Rate = 0.02 +/- 0.002

[Tue Jun 26 10:39:14 2012] Off-axis axis estimate = 1.35'
[Tue Jun 26 10:45:54 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 10:45:54 2012] Initial guess for spatial extent in simple fitting = 7.10"
[Tue Jun 26 10:45:54 2012] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.824
[Tue Jun 26 10:45:54 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 7.10"
[Wed Jun 27 06:23:17 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src46.ximg exists
[Wed Jun 27 06:23:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src46.csv
[Wed Jun 27 06:23:17 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src46_1.ximg exists
[Wed Jun 27 06:23:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src46.csv
[Wed Jun 27 06:23:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:23:20 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Wed Jun 27 06:23:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src46.csv
[Wed Jun 27 06:23:20 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Wed Jun 27 06:23:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src46.csv
[Wed Jun 27 06:23:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:21:31 2012] Spatial fit model total counts = 4324.830000, observed total counts = 3186.000000
[Wed Jun 27 09:21:31 2012] Poor agreement between spatial fit and data for source 46
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 27 09:21:31 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:21:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:21:31 2012] Assessing source extent using major
[Wed Jun 27 09:21:31 2012] Source does appear to be extended
[Wed Jun 27 09:21:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:21:31 2012] Source is confused with source 47
[Wed Jun 27 09:21:56 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 09:21:56 2012] Initial guess for spatial extent in simple fitting = 7.10"
[Wed Jun 27 09:21:56 2012] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.824
[Wed Jun 27 09:21:56 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 7.10"
[Wed Jun 27 22:43:49 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src36.ximg exists
[Wed Jun 27 22:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src36.csv
[Wed Jun 27 22:43:49 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src36_1.ximg exists
[Wed Jun 27 22:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src36.csv
[Wed Jun 27 22:43:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 22:43:51 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Wed Jun 27 22:43:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src36.csv
[Wed Jun 27 22:43:51 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Wed Jun 27 22:43:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src36.csv
[Wed Jun 27 22:43:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 03:21:12 2012] Spatial fit model total counts = 4324.800000, observed total counts = 3186.000000
[Thu Jun 28 03:21:12 2012] Poor agreement between spatial fit and data for source 46
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 28 03:21:12 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 03:21:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 03:21:12 2012] Assessing source extent using major
[Thu Jun 28 03:21:12 2012] Source does appear to be extended
[Thu Jun 28 03:21:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 03:21:37 2012] XMMSAS src. selection expression = ellipse(26896.484314, 27207.364349, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 28 03:21:37 2012] Writing source region out to fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src46_src.reg
[Thu Jun 28 03:21:37 2012] Extracting stamp from image fullrun_pn_xmm0136540401_pi300-10000_cl_sm2.00.img.gz, (272, 276) - (347, 351)
[Thu Jun 28 03:21:37 2012] XMMSAS bgd. selection expression = annulus(26896.484314, 27207.364349, 1087.500000, 2175.000000, X, Y) && !ellipse(25371.841705, 23513.249512, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25371.931976, 24415.054108, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20274.174000, 31343.748000, 4867.584140, 4867.584140, 0.000000, X, Y) && !ellipse(20744.353248, 30714.704730, 3977.352114, 2640.333229, 57.111782, X, Y) && !ellipse(20969.524000, 30435.890000, 4274.304123, 4274.304123, 0.000000, X, Y) && !ellipse(21770.924000, 29383.502000, 5186.376149, 5186.376149, 0.000000, X, Y) && !ellipse(21975.362000, 29056.780000, 3977.352114, 2245.279265, 52.179100, X, Y) && !ellipse(22248.896000, 28694.874000, 3571.512103, 3571.512103, 0.000000, X, Y) && !ellipse(22374.564000, 28500.056000, 5095.680147, 5095.680147, 0.000000, X, Y) && !ellipse(22892.746000, 27816.074000, 3469.128100, 3469.128100, 0.000000, X, Y) && !ellipse(23146.598000, 27469.264000, 3814.248110, 3814.248110, 0.000000, X, Y) && !ellipse(23603.884000, 26798.644000, 6400.728184, 6400.728184, 0.000000, X, Y) && !ellipse(23858.732000, 26391.814000, 3404.208098, 3404.208098, 0.000000, X, Y) && !ellipse(26697.073029, 24330.887024, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27856.472000, 23017.918000, 3683.832106, 3683.832106, 0.000000, X, Y) && !ellipse(26743.326294, 22881.424225, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25683.223541, 28696.150787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27006.819366, 28034.204193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26140.679779, 28066.932739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24572.433624, 27954.500214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27052.002655, 26610.219055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28081.551331, 26562.447113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27671.346000, 25983.860000, 1179.280034, 1179.280034, 0.000000, X, Y) && !ellipse(28282.948578, 25202.695099, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 28 03:21:37 2012] Writing fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src46.gif
[Thu Jun 28 07:00:51 2012] Mean detx,y = (-2647.55, 1936.80) 
[Thu Jun 28 07:00:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 07:01:23 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 07:01:23 2012] Setting source spectrum file to fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Thu Jun 28 07:01:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Thu Jun 28 20:38:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 20:38:24 2012] rmf not generated due to insufficient counts
[Thu Jun 28 23:25:36 2012] Updating aperture counts using extracted products
[Thu Jun 28 23:25:36 2012] Error reading totcts from fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Thu Jun 28 23:25:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:25:37 2012] Using photon index=1.80, rate=0.0234, arf fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src46.arf
[Thu Jun 28 23:25:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:25:37 2012] Updating source flux to 7.7e-14
[Thu Jun 28 23:29:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting