[Tue Jun 26 10:39:10 2012] Detection parameters:
  Position = (246.2, 344.0) = 11 4 46.10 38 17 34.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13846.3 +/- 142.5
  Background counts = 105.1
  Rate = 0.6 +/- 0.006

[Tue Jun 26 10:39:14 2012] Off-axis axis estimate = 5.03'
[Tue Jun 26 10:45:54 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 10:45:54 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Tue Jun 26 10:45:54 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.148
[Tue Jun 26 10:45:54 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.94"
[Wed Jun 27 06:23:16 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src12.ximg exists
[Wed Jun 27 06:23:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src12.csv
[Wed Jun 27 06:23:16 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Jun 27 06:23:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src12.csv
[Wed Jun 27 06:23:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 06:23:19 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Jun 27 06:23:19 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Jun 27 06:23:19 2012] Fit fullrun_pn_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Jun 27 09:21:31 2012] Warning, spatial fit 12 centroid is now closest to src. 11
[Wed Jun 27 09:21:31 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:21:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:21:31 2012] Assessing source extent using major
[Wed Jun 27 09:21:31 2012] Source does appear to be extended
[Wed Jun 27 09:21:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:21:31 2012] Source is confused with source 11
[Wed Jun 27 09:21:56 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 09:21:56 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Wed Jun 27 09:21:56 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.148
[Wed Jun 27 09:21:56 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.94"
[Wed Jun 27 22:43:49 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jun 27 22:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src9.csv
[Wed Jun 27 22:43:49 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jun 27 22:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src9.csv
[Wed Jun 27 22:43:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 22:43:50 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jun 27 22:43:50 2012] fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jun 27 22:43:50 2012] Fit fullrun_pn_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jun 28 03:21:12 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 19.215129 pixels away
[Thu Jun 28 03:21:12 2012] Warning, spatial fit 9 centroid is now closest to src. 11
[Thu Jun 28 03:21:12 2012] Spatial fit model total counts = 48845.800000, observed total counts = 47979.000000
[Thu Jun 28 03:21:12 2012] Offset between fit and detection position for source 12 = 7.333546 pixels
[Thu Jun 28 03:21:12 2012] Warning, changing simple spatial fit ID from 9 to 11
[Thu Jun 28 03:21:12 2012] 46063.160000 total counts/ 2172.160000 bgd. counts: snr = 941.736861
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 7.333546 pixels
  Position = (250.8, 338.3) = 11 4 44.41 38 17 8.3
  Extent = 21.6 (21.6-21.6)", rotation angle = 0
  Source counts = 43891.0 +/- 214.6
  Background counts = 2172.2
  Rate = 2 +/- 0.01
[Thu Jun 28 03:21:12 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 03:21:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 03:21:12 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 03:21:12 2012] Source does appear to be extended
[Thu Jun 28 03:21:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 03:21:35 2012] Counts = 43891.000000, rescaling region sizes by 3.000000
[Thu Jun 28 03:21:35 2012] XMMSAS src. selection expression = ellipse(21770.924000, 29383.502000, 3889.782112, 3889.782112, 0.000000, X, Y)
[Thu Jun 28 03:21:35 2012] Writing source region out to fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src12_src.reg
[Thu Jun 28 03:21:35 2012] Extracting stamp from image fullrun_pn_xmm0136540401_pi300-10000_cl_sm2.00.img.gz, (27, 115) - (474, 562)
[Thu Jun 28 03:21:35 2012] XMMSAS bgd. selection expression = annulus(21770.924000, 29383.502000, 19448.910560, 38897.821119, X, Y) && !ellipse(25371.841705, 23513.249512, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25371.931976, 24415.054108, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(17392.354000, 35281.602000, 4218.312121, 4218.312121, 0.000000, X, Y) && !ellipse(18117.924000, 34307.714000, 5530.752159, 5530.752159, 0.000000, X, Y) && !ellipse(18630.276000, 33621.626000, 4314.144124, 4314.144124, 0.000000, X, Y) && !ellipse(20274.174000, 31343.748000, 4867.584140, 4867.584140, 0.000000, X, Y) && !ellipse(20744.353248, 30714.704730, 3977.352114, 2640.333229, 57.111782, X, Y) && !ellipse(20969.524000, 30435.890000, 4274.304123, 4274.304123, 0.000000, X, Y) && !ellipse(21975.362000, 29056.780000, 3977.352114, 2245.279265, 52.179100, X, Y) && !ellipse(22248.896000, 28694.874000, 3571.512103, 3571.512103, 0.000000, X, Y) && !ellipse(22374.564000, 28500.056000, 5095.680147, 5095.680147, 0.000000, X, Y) && !ellipse(22892.746000, 27816.074000, 3469.128100, 3469.128100, 0.000000, X, Y) && !ellipse(23146.598000, 27469.264000, 3814.248110, 3814.248110, 0.000000, X, Y) && !ellipse(23603.884000, 26798.644000, 6400.728184, 6400.728184, 0.000000, X, Y) && !ellipse(21882.506140, 26602.796600, 515.531215, 515.531215, 0.000000, X, Y) && !ellipse(23858.732000, 26391.814000, 3404.208098, 3404.208098, 0.000000, X, Y) && !ellipse(26697.073029, 24330.887024, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28134.877594, 23923.679871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27856.472000, 23017.918000, 3683.832106, 3683.832106, 0.000000, X, Y) && !ellipse(26743.326294, 22881.424225, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25047.290924, 21716.676147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26934.480438, 21323.622955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25869.975647, 22195.923538, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27919.275940, 33755.208221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33620.773468, 30301.601868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25683.223541, 28696.150787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27006.819366, 28034.204193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26140.679779, 28066.932739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24572.433624, 27954.500214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42044.592010, 27708.920624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26896.484314, 27207.364349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27052.002655, 26610.219055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28081.551331, 26562.447113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20584.319427, 26592.358673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27671.346000, 25983.860000, 1179.280034, 1179.280034, 0.000000, X, Y) && !ellipse(12925.007278, 25688.480499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28282.948578, 25202.695099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42261.053040, 25239.121000, 601.473617, 601.473617, 0.000000, X, Y) && !ellipse(21873.163574, 23239.672638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21482.955246, 22392.832458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22312.488617, 22460.695007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21697.782959, 22014.681946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23179.929169, 21129.049133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22327.263855, 21883.909805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23048.717621, 21481.699417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21392.066956, 21364.517044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23283.581512, 20425.668152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27788.876831, 20037.976791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24224.646000, 20188.215600, 1291.152037, 1118.192032, 86.356000, X, Y) && !ellipse(24176.806000, 20091.480000, 1481.200043, 1481.200043, 0.000000, X, Y) && !ellipse(27280.677673, 20067.868439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25726.548309, 18537.664871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25450.693420, 17973.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25968.279220, 15829.664000, 1727.032050, 1727.032050, 0.000000, X, Y) && !ellipse(31537.900330, 8633.925697, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 28 03:21:35 2012] Writing fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src12.gif
[Thu Jun 28 04:42:59 2012] Mean detx,y = (287.68, 6439.11) 
[Thu Jun 28 04:43:05 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 04:48:22 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 04:48:23 2012] Setting source spectrum file to fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 28 04:48:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jun 28 23:25:35 2012] Updating aperture counts using extracted products
[Thu Jun 28 23:25:35 2012] Error reading totcts from fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 28 23:25:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:25:36 2012] Using photon index=1.80, rate=2.28, arf fullrun_pn_xmm0136540401_pi300-10000_pass1_cl_src12.arf
[Thu Jun 28 23:25:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:25:36 2012] Updating source flux to 5.9e-12
[Thu Jun 28 23:29:27 2012] Flag c found in src. 12 procflags, skipping spectral fitting