[Tue Jun 26 10:40:23 2012] Detection parameters:
  Position = (371.4, 170.9) = 11 3 59.91 38 5 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 225.6 +/- 19.5
  Background counts = 24.6
  Rate = 0.01 +/- 0.0008

[Tue Jun 26 10:40:24 2012] Off-axis axis estimate = 10.66'
[Wed Jun 27 08:18:30 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 08:18:30 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Wed Jun 27 08:18:30 2012] source mask rpix=2.7, npix_max = 41, mask sum = 32, frac = 0.780
[Wed Jun 27 08:18:30 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.76"
[Wed Jun 27 09:21:08 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun 27 09:21:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src3.csv
[Wed Jun 27 09:21:08 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun 27 09:21:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src3.csv
[Wed Jun 27 09:21:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:21:08 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun 27 09:21:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jun 27 09:21:08 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun 27 09:21:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jun 27 09:21:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:21:43 2012] Warning, spatial fit 3 centroid is now closest to src. 17
[Wed Jun 27 09:21:43 2012] Spatial fit model total counts = 545.780000, observed total counts = 517.000000
[Wed Jun 27 09:21:43 2012] Offset between fit and detection position for source 5 = 0.662097 pixels
[Wed Jun 27 09:21:43 2012] Warning, changing simple spatial fit ID from 3 to 10
[Wed Jun 27 09:21:43 2012] 530.810800 total counts/ 47.130800 bgd. counts: snr = 70.454011
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.662097 pixels
  Position = (371.5, 171.5) = 11 3 59.90 38 5 2.8
  Extent = 24.3 (24.0-48.5)", rotation angle = 0
  Source counts = 483.7 +/- 23.0
  Background counts = 47.1
  Rate = 0.02 +/- 0.001
[Wed Jun 27 09:21:43 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:21:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:21:43 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 09:21:43 2012] Source does appear to be extended
[Wed Jun 27 09:21:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:21:43 2012] Source is confused with source 6
[Wed Jun 27 09:21:43 2012] Source is confused with source 17
[Wed Jun 27 09:21:43 2012] Source is confused with source 18
[Thu Jun 28 01:47:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 28 01:47:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 28 01:47:14 2012] Initial guess for spatial extent in simple fitting = 24.26"
[Thu Jun 28 01:47:14 2012] source mask rpix=5.6, npix_max = 147, mask sum = 138, frac = 0.934
[Thu Jun 28 01:47:14 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 24.26"
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 28 03:20:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src3.csv
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 28 03:20:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src3.csv
[Thu Jun 28 03:20:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 28 03:20:56 2012] Fit fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jun 28 03:21:23 2012] Warning, spatial fit 3 centroid is now closest to src. 17
[Thu Jun 28 03:21:23 2012] Spatial fit model total counts = 621.105000, observed total counts = 591.000000
[Thu Jun 28 03:21:23 2012] Offset between fit and detection position for source 5 = 0.624999 pixels
[Thu Jun 28 03:21:23 2012] Warning, changing simple spatial fit ID from 3 to 4
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.624999 pixels
  Position = (370.9, 171.6) = 11 4 0.12 38 5 3.1
  Extent = 19.7 (17.7-22.6)", rotation angle = 0
  Source counts = 600.3 +/- 24.5
  Background counts = 0.0
  Rate = 0.03 +/- 0.001
[Thu Jun 28 03:21:23 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 03:21:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 03:21:23 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 03:21:23 2012] Source does appear to be extended
[Thu Jun 28 03:21:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 22:21:10 2012] XMMSAS src. selection expression = ellipse(32216.788000, 14881.380000, 1181.532034, 1181.532034, 0.000000, X, Y)
[Thu Jun 28 22:21:10 2012] Writing source region out to fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src5_src.reg
[Thu Jun 28 22:21:10 2012] Extracting stamp from image fullrun_mos2_xmm0136540401_pi300-10000_cl_sm2.00.img.gz, (303, 104) - (439, 240)
[Thu Jun 28 22:21:10 2012] XMMSAS bgd. selection expression = annulus(32216.788000, 14881.380000, 1969.220057, 3938.440113, X, Y) && !ellipse(30956.894000, 16534.668000, 1795.616052, 1795.616052, 0.000000, X, Y) && !ellipse(31924.146000, 15394.992000, 1810.504052, 1810.504052, 0.000000, X, Y) && !ellipse(34493.258143, 11723.607202, 2081.944060, 485.414894, 53.937460, X, Y) && !ellipse(30428.278278, 17441.864574, 1712.608049, 1013.190726, 241.680479, X, Y) && !ellipse(33167.530000, 13620.850000, 1638.824047, 1638.824047, 0.000000, X, Y) && !ellipse(34105.620000, 12231.862000, 2035.960059, 2035.960059, 0.000000, X, Y) && !ellipse(31665.326000, 15694.674000, 2305.808066, 2305.808066, 0.000000, X, Y) && !ellipse(32711.226000, 14337.036000, 3675.160106, 3675.160106, 0.000000, X, Y) && !ellipse(35052.588000, 10956.644000, 2234.464064, 2234.464064, 0.000000, X, Y) && !ellipse(33621.058000, 13098.954000, 1864.136054, 1864.136054, 0.000000, X, Y)
[Thu Jun 28 22:21:10 2012] Writing fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src5.gif
[Thu Jun 28 22:22:06 2012] Mean detx,y = (-112.64, 10931.59) 
[Thu Jun 28 22:22:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 22:22:20 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 22:22:20 2012] Setting source spectrum file to fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 28 22:22:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jun 28 23:25:39 2012] Updating aperture counts using extracted products
[Thu Jun 28 23:25:39 2012] Error reading totcts from fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 28 23:25:39 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:25:39 2012] Using photon index=1.80, rate=0.0275, arf fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src5.arf
[Thu Jun 28 23:25:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:25:39 2012] Updating source flux to 5.5e-13
[Thu Jun 28 23:28:03 2012] Flag c found in src. 5 procflags, skipping spectral fitting