[Tue Jun 26 10:40:24 2012] Detection parameters:
  Position = (386.2, 151.8) = 11 3 54.50 38 3 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.9 +/- 14.9
  Background counts = 22.7
  Rate = 0.004 +/- 0.0006

[Tue Jun 26 10:40:24 2012] Off-axis axis estimate = 12.39'
[Wed Jun 27 08:18:30 2012] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 08:18:30 2012] Initial guess for spatial extent in simple fitting = 12.62"
[Wed Jun 27 08:18:30 2012] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.842
[Wed Jun 27 08:18:30 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 12.62"
[Wed Jun 27 09:21:08 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src16.ximg exists
[Wed Jun 27 09:21:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src16.csv
[Wed Jun 27 09:21:08 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Jun 27 09:21:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src16.csv
[Wed Jun 27 09:21:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:21:09 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Jun 27 09:21:09 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Jun 27 09:21:09 2012] Fit fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Wed Jun 27 09:21:43 2012] Spatial fit model total counts = 560.730000, observed total counts = 527.000000
[Wed Jun 27 09:21:43 2012] Offset between fit and detection position for source 20 = 1.075430 pixels
[Wed Jun 27 09:21:43 2012] Warning, changing simple spatial fit ID from 16 to 7
[Wed Jun 27 09:21:43 2012] 560.904642 total counts/ 0.358642 bgd. counts: snr = 936.010421
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.075430 pixels
  Position = (387.0, 151.1) = 11 3 54.19 38 3 33.9
  Extent = 23.3 (20.2-24.9)", rotation angle = 0
  Source counts = 560.5 +/- 23.7
  Background counts = 0.4
  Rate = 0.03 +/- 0.001
[Wed Jun 27 09:21:43 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:21:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:21:43 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 09:21:43 2012] Source does appear to be extended
[Wed Jun 27 09:21:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:21:43 2012] Source is confused with source 4
[Thu Jun 28 01:47:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 28 01:47:14 2012] Initial guess for spatial extent in simple fitting = 23.30"
[Thu Jun 28 01:47:14 2012] source mask rpix=5.4, npix_max = 137, mask sum = 122, frac = 0.889
[Thu Jun 28 01:47:14 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 23.30"
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src15.ximg exists
[Thu Jun 28 03:20:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src15.csv
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu Jun 28 03:20:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src15.csv
[Thu Jun 28 03:20:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Jun 28 03:20:56 2012] Fit fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Thu Jun 28 03:21:23 2012] Warning, spatial fit 15 centroid is now closest to src. 18
[Thu Jun 28 03:21:23 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 03:21:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 03:21:23 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 03:21:23 2012] Source does appear to be extended
[Thu Jun 28 03:21:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 22:21:10 2012] XMMSAS src. selection expression = ellipse(33621.058000, 13098.954000, 1398.102040, 1398.102040, 0.000000, X, Y)
[Thu Jun 28 22:21:10 2012] Writing source region out to fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src20_src.reg
[Thu Jun 28 22:21:10 2012] Extracting stamp from image fullrun_mos2_xmm0136540401_pi300-10000_cl_sm2.00.img.gz, (307, 71) - (467, 231)
[Thu Jun 28 22:21:10 2012] XMMSAS bgd. selection expression = annulus(33621.058000, 13098.954000, 2330.170067, 4660.340134, X, Y) && !ellipse(30956.894000, 16534.668000, 1795.616052, 1795.616052, 0.000000, X, Y) && !ellipse(32216.788000, 14881.380000, 1575.376045, 1575.376045, 0.000000, X, Y) && !ellipse(31924.146000, 15394.992000, 1810.504052, 1810.504052, 0.000000, X, Y) && !ellipse(34493.258143, 11723.607202, 2081.944060, 485.414894, 53.937460, X, Y) && !ellipse(30428.278278, 17441.864574, 1712.608049, 1013.190726, 241.680479, X, Y) && !ellipse(33167.530000, 13620.850000, 1638.824047, 1638.824047, 0.000000, X, Y) && !ellipse(34105.620000, 12231.862000, 2035.960059, 2035.960059, 0.000000, X, Y) && !ellipse(31665.326000, 15694.674000, 2305.808066, 2305.808066, 0.000000, X, Y) && !ellipse(32711.226000, 14337.036000, 3675.160106, 3675.160106, 0.000000, X, Y) && !ellipse(31573.124603, 8624.394142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35052.588000, 10956.644000, 2234.464064, 2234.464064, 0.000000, X, Y)
[Thu Jun 28 22:21:10 2012] Writing fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src20.gif
[Thu Jun 28 22:37:14 2012] Mean detx,y = (-82.87, 13289.46) 
[Thu Jun 28 22:37:15 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 22:37:39 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 22:37:39 2012] Setting source spectrum file to fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jun 28 22:37:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Jun 28 23:25:39 2012] Updating aperture counts using extracted products
[Thu Jun 28 23:25:39 2012] Error reading totcts from fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jun 28 23:25:39 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:25:39 2012] Using photon index=1.80, rate=0.0257, arf fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src20.arf
[Thu Jun 28 23:25:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:25:39 2012] Updating source flux to 6.8e-13
[Thu Jun 28 23:28:03 2012] Flag c found in src. 20 procflags, skipping spectral fitting