[Tue Jun 26 10:40:24 2012] Detection parameters:
  Position = (363.2, 184.3) = 11 4 2.95 38 5 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.1 +/- 60.4
  Background counts = 25.3
  Rate = 0.01 +/- 0.003

[Tue Jun 26 10:40:24 2012] Off-axis axis estimate = 9.51'
[Wed Jun 27 08:18:30 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 08:18:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 08:18:30 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Wed Jun 27 08:18:30 2012] source mask rpix=2.6, npix_max = 37, mask sum = 23, frac = 0.610
[Wed Jun 27 08:18:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.19"
[Wed Jun 27 09:21:08 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 27 09:21:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 09:21:08 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 27 09:21:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 09:21:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:21:08 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 27 09:21:08 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 27 09:21:08 2012] Fit fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 27 09:21:43 2012] Warning, spatial fit 1 centroid is now closest to src. 15
[Wed Jun 27 09:21:43 2012] Source 16 is offset by 2.039248 and -3.291036 pixels which is larger than
2 X fitted extent = 1.432681 x 1.432681, not incorporating fit results
[Wed Jun 27 09:21:43 2012] Spatial fit model total counts = 580.643000, observed total counts = 530.000000
[Wed Jun 27 09:21:43 2012] Offset between fit and detection position for source 16 = 9.283700 pixels
[Wed Jun 27 09:21:43 2012] Warning, changing simple spatial fit ID from 1 to 9
[Wed Jun 27 09:21:43 2012] 418.191900 total counts/ 10.616900 bgd. counts: snr = 125.085991
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 9.283700 pixels
  Position = (356.4, 190.6) = 11 4 5.45 38 6 25.8
  Extent = 22.4 (22.4-44.9)", rotation angle = 0
  Source counts = 407.6 +/- 20.4
  Background counts = 10.6
  Rate = 0.02 +/- 0.0009
[Wed Jun 27 09:21:43 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:21:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:21:43 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 09:21:43 2012] Source does appear to be extended
[Wed Jun 27 09:21:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:21:43 2012] Source is confused with source 14
[Wed Jun 27 09:21:43 2012] Source is confused with source 17
[Wed Jun 27 09:21:43 2012] Source is confused with source 15
[Thu Jun 28 01:47:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 28 01:47:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 28 01:47:14 2012] Initial guess for spatial extent in simple fitting = 22.45"
[Thu Jun 28 01:47:14 2012] source mask rpix=5.2, npix_max = 128, mask sum = 85, frac = 0.663
[Thu Jun 28 01:47:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 22.45"
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 28 03:20:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src1.csv
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 28 03:20:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src1.csv
[Thu Jun 28 03:20:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 28 03:20:56 2012] Fit fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 28 03:21:23 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Thu Jun 28 03:21:23 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 03:21:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 03:21:23 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 03:21:23 2012] Source does appear to be extended
[Thu Jun 28 03:21:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 22:21:09 2012] XMMSAS src. selection expression = ellipse(30956.894000, 16534.668000, 1346.712039, 1346.712039, 0.000000, X, Y)
[Thu Jun 28 22:21:09 2012] Writing source region out to fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src16_src.reg
[Thu Jun 28 22:21:09 2012] Extracting stamp from image fullrun_mos2_xmm0136540401_pi300-10000_cl_sm2.00.img.gz, (279, 113) - (434, 268)
[Thu Jun 28 22:21:09 2012] XMMSAS bgd. selection expression = annulus(30956.894000, 16534.668000, 2244.520065, 4489.040129, X, Y) && !ellipse(32216.788000, 14881.380000, 1575.376045, 1575.376045, 0.000000, X, Y) && !ellipse(31924.146000, 15394.992000, 1810.504052, 1810.504052, 0.000000, X, Y) && !ellipse(34493.258143, 11723.607202, 2081.944060, 485.414894, 53.937460, X, Y) && !ellipse(30428.278278, 17441.864574, 1712.608049, 1013.190726, 241.680479, X, Y) && !ellipse(33167.530000, 13620.850000, 1638.824047, 1638.824047, 0.000000, X, Y) && !ellipse(34105.620000, 12231.862000, 2035.960059, 2035.960059, 0.000000, X, Y) && !ellipse(31665.326000, 15694.674000, 2305.808066, 2305.808066, 0.000000, X, Y) && !ellipse(32711.226000, 14337.036000, 3675.160106, 3675.160106, 0.000000, X, Y) && !ellipse(35052.588000, 10956.644000, 2234.464064, 2234.464064, 0.000000, X, Y) && !ellipse(33621.058000, 13098.954000, 1864.136054, 1864.136054, 0.000000, X, Y)
[Thu Jun 28 22:21:09 2012] Writing fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src16.gif
[Thu Jun 28 22:21:12 2012] Mean detx,y = (-171.82, 9009.31) 
[Thu Jun 28 22:21:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 22:21:53 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 22:21:53 2012] Setting source spectrum file to fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Jun 28 22:21:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu Jun 28 23:25:39 2012] Updating aperture counts using extracted products
[Thu Jun 28 23:25:39 2012] Error reading totcts from fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Jun 28 23:25:39 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:25:39 2012] Using photon index=1.80, rate=0.0187, arf fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src16.arf
[Thu Jun 28 23:25:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:25:39 2012] Updating source flux to 3.1e-13
[Thu Jun 28 23:28:03 2012] Flag b found in src. 16 procflags, skipping spectral fitting
[Thu Jun 28 23:28:03 2012] Flag c found in src. 16 procflags, skipping spectral fitting
[Thu Jun 28 23:29:27 2012] Reading fit data from xmm0136540401/analysis//spectral/fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src16_pl.csv
[Thu Jun 28 23:29:27 2012] Spectral fit parameter nH value = 2.8074e+20
[Thu Jun 28 23:29:27 2012] Spectral fit parameter PhoIndex value = 2.51778
[Thu Jun 28 23:29:27 2012] Failed to get F(0.3-8.0) from xmm0136540401/analysis//spectral/fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src16_pl.csv, possibly due to different flux energy range selected
[Thu Jun 28 23:29:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:29:27 2012] Using Nh = 2.8e+20, photon index=2.52, rate=0.0187, arf fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src16.arf
[Thu Jun 28 23:29:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:29:27 2012] Updating source flux to 2.4e-13