[Tue Jun 26 10:40:23 2012] Detection parameters:
  Position = (398.8, 133.8) = 11 3 49.84 38 2 25.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.3 +/- 21.3
  Background counts = 20.8
  Rate = 0.009 +/- 0.0009

[Tue Jun 26 10:40:24 2012] Off-axis axis estimate = 13.98'
[Wed Jun 27 08:18:30 2012] Using EEF radius (= 13.42 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 08:18:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 08:18:30 2012] Initial guess for spatial extent in simple fitting = 13.42"
[Wed Jun 27 08:18:30 2012] source mask rpix=3.1, npix_max = 51, mask sum = 43, frac = 0.836
[Wed Jun 27 08:18:30 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.42"
[Wed Jun 27 09:21:08 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun 27 09:21:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src5.csv
[Wed Jun 27 09:21:08 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun 27 09:21:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src5.csv
[Wed Jun 27 09:21:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 09:21:08 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 27 09:21:08 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 27 09:21:08 2012] Fit fullrun_mos2_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jun 27 09:21:43 2012] Warning, spatial fit 5 centroid is now closest to src. 2
[Wed Jun 27 09:21:43 2012] Spatial fit model total counts = 547.090000, observed total counts = 529.000000
[Wed Jun 27 09:21:43 2012] Offset between fit and detection position for source 1 = 2.369850 pixels
[Wed Jun 27 09:21:43 2012] Warning, changing simple spatial fit ID from 5 to 8
[Wed Jun 27 09:21:43 2012] 554.266000 total counts/ 316.100000 bgd. counts: snr = 13.395765
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.369850 pixels
  Position = (397.0, 135.3) = 11 3 50.51 38 2 25.1
  Extent = 26.0" x 6.1", rotation angle = 54
  Source counts = 238.2 +/- 23.5
  Background counts = 316.1
  Rate = 0.01 +/- 0.001
[Wed Jun 27 09:21:43 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:21:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:21:43 2012] Assessing source extent using major
[Wed Jun 27 09:21:43 2012] Source does appear to be extended
[Wed Jun 27 09:21:43 2012] Computing asymmetry using major and minor axis, asym = 4.29
[Wed Jun 27 09:21:43 2012] Source is asymmetric
[Wed Jun 27 09:21:43 2012] Source is confused with source 2
[Wed Jun 27 09:21:43 2012] Source is confused with source 3
[Thu Jun 28 01:47:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 28 01:47:14 2012] Initial guess for spatial extent in simple fitting = 16.05"
[Thu Jun 28 01:47:14 2012] source mask rpix=3.7, npix_max = 70, mask sum = 63, frac = 0.898
[Thu Jun 28 01:47:14 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 16.05"
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jun 28 03:20:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src5.csv
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jun 28 03:20:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src5.csv
[Thu Jun 28 03:20:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jun 28 03:20:56 2012] fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jun 28 03:20:56 2012] Fit fullrun_mos2_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jun 28 03:21:23 2012] Warning, spatial fit 5 centroid is now closest to src. 3
[Thu Jun 28 03:21:23 2012] Spatial fit model total counts = 531.835000, observed total counts = 466.000000
[Thu Jun 28 03:21:23 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 28 03:21:23 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 03:21:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 03:21:23 2012] Assessing source extent using major
[Thu Jun 28 03:21:23 2012] Source does appear to be extended
[Thu Jun 28 03:21:23 2012] Computing asymmetry using major and minor axis, asym = 4.29
[Thu Jun 28 03:21:23 2012] Source is asymmetric
[Thu Jun 28 22:21:10 2012] XMMSAS src. selection expression = ellipse(34493.258143, 11723.607202, 1561.458045, 364.061171, 53.937460, X, Y)
[Thu Jun 28 22:21:10 2012] Writing source region out to fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 28 22:21:10 2012] Extracting stamp from image fullrun_mos2_xmm0136540401_pi300-10000_cl_sm2.00.img.gz, (307, 46) - (487, 225)
[Thu Jun 28 22:21:10 2012] XMMSAS bgd. selection expression = annulus(34493.258143, 11723.607202, 2602.430075, 5204.860150, X, Y) && !ellipse(30956.894000, 16534.668000, 1795.616052, 1795.616052, 0.000000, X, Y) && !ellipse(32216.788000, 14881.380000, 1575.376045, 1575.376045, 0.000000, X, Y) && !ellipse(31924.146000, 15394.992000, 1810.504052, 1810.504052, 0.000000, X, Y) && !ellipse(30428.278278, 17441.864574, 1712.608049, 1013.190726, 241.680479, X, Y) && !ellipse(33167.530000, 13620.850000, 1638.824047, 1638.824047, 0.000000, X, Y) && !ellipse(34105.620000, 12231.862000, 2035.960059, 2035.960059, 0.000000, X, Y) && !ellipse(31665.326000, 15694.674000, 2305.808066, 2305.808066, 0.000000, X, Y) && !ellipse(32711.226000, 14337.036000, 3675.160106, 3675.160106, 0.000000, X, Y) && !ellipse(31573.124603, 8624.394142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35052.588000, 10956.644000, 2234.464064, 2234.464064, 0.000000, X, Y) && !ellipse(33621.058000, 13098.954000, 1864.136054, 1864.136054, 0.000000, X, Y)
[Thu Jun 28 22:21:10 2012] Writing fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src1.gif
[Thu Jun 28 22:22:57 2012] Mean detx,y = (-155.63, 14906.82) 
[Thu Jun 28 22:22:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 22:23:32 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 22:23:32 2012] Setting source spectrum file to fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 28 22:23:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 28 23:25:39 2012] Updating aperture counts using extracted products
[Thu Jun 28 23:25:39 2012] Error reading totcts from fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 28 23:25:39 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:25:39 2012] Using photon index=1.80, rate=0.0109, arf fullrun_mos2_xmm0136540401_pi300-10000_pass1_cl_src1.arf
[Thu Jun 28 23:25:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:25:39 2012] Updating source flux to 3.3e-13
[Thu Jun 28 23:28:03 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Thu Jun 28 23:28:03 2012] Flag c found in src. 1 procflags, skipping spectral fitting