[Tue Jun 26 10:39:51 2012] Detection parameters: Position = (226.1, 374.1) = 11 4 53.55 38 19 44.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 51.4 +/- 11.9 Background counts = 29.5 Rate = 0.004 +/- 0.0009 [Tue Jun 26 10:39:52 2012] Off-axis axis estimate = 7.59' [Wed Jun 27 06:23:21 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting [Wed Jun 27 06:23:21 2012] Initial guess for spatial extent in simple fitting = 10.22" [Wed Jun 27 06:23:21 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.108 [Wed Jun 27 06:23:21 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.22" [Wed Jun 27 08:18:28 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src13.ximg exists [Wed Jun 27 08:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src13.csv [Wed Jun 27 08:18:28 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src13_1.ximg exists [Wed Jun 27 08:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src13.csv [Wed Jun 27 08:18:28 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Wed Jun 27 08:18:29 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly [Wed Jun 27 09:21:39 2012] Source 8 is offset by -1.048265 and 3.706857 pixels which is larger than 2 X fitted extent = 1.175871 x 1.175871, not incorporating fit results [Wed Jun 27 09:21:39 2012] Vigneting correction estimate = 1.000000 [Wed Jun 27 09:21:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 27 09:21:39 2012] Assessing source extent using major [Wed Jun 27 09:21:39 2012] Source does appear to be extended [Wed Jun 27 09:21:39 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 27 09:21:39 2012] Source is confused with source 6 [Wed Jun 27 09:21:39 2012] Source is confused with source 9 [Wed Jun 27 22:43:52 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting [Wed Jun 27 22:43:52 2012] Initial guess for spatial extent in simple fitting = 10.22" [Wed Jun 27 22:43:52 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.108 [Wed Jun 27 22:43:52 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 10.22" [Thu Jun 28 01:47:13 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src13.ximg exists [Thu Jun 28 01:47:13 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src13_1.ximg exists [Thu Jun 28 01:47:13 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src13 appears to have run properly [Thu Jun 28 01:47:14 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists [Thu Jun 28 01:47:14 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists [Thu Jun 28 01:47:14 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly [Thu Jun 28 03:21:19 2012] Spatial fit model total counts = 344.916000, observed total counts = 342.000000 [Thu Jun 28 03:21:19 2012] Offset between fit and detection position for source 8 = 0.620985 pixels [Thu Jun 28 03:21:19 2012] Warning, changing simple spatial fit ID from 13 to 10 Spatial fit parameters: Offset between fit and detection position for source 8 = 0.620985 pixels Position = (225.5, 373.9) = 11 4 53.77 38 19 43.2 Extent = 20.9 (20.8-21.0)", rotation angle = 0 Source counts = 260.5 +/- 16.1 Background counts = 0.0 Rate = 0.01 +/- 0.0007 [Thu Jun 28 03:21:19 2012] Vigneting correction estimate = 1.000000 [Thu Jun 28 03:21:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 28 03:21:19 2012] Assessing source extent using major axis lower bound [Thu Jun 28 03:21:19 2012] Source does appear to be extended [Thu Jun 28 03:21:19 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 28 20:57:59 2012] XMMSAS src. selection expression = ellipse(19569.870000, 32483.064000, 1255.938036, 1255.938036, 0.000000, X, Y) [Thu Jun 28 20:57:59 2012] Writing source region out to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src8_src.reg [Thu Jun 28 20:57:59 2012] Extracting stamp from image fullrun_mos1_xmm0136540401_pi300-10000_cl_sm2.00.img.gz, (153, 302) - (298, 446) [Thu Jun 28 20:57:59 2012] XMMSAS bgd. selection expression = annulus(19569.870000, 32483.064000, 2093.230060, 4186.460120, X, Y) && !ellipse(20628.256800, 30692.436600, 614.366418, 301.035209, 128.327000, X, Y) && !ellipse(19175.810000, 33060.244000, 1464.064042, 1464.064042, 0.000000, X, Y) && !ellipse(20903.790000, 30442.218000, 1907.152055, 1907.152055, 0.000000, X, Y) && !ellipse(17831.112457, 34836.168884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20524.466000, 31060.540000, 1565.776045, 1565.776045, 0.000000, X, Y) && !ellipse(18135.856000, 34363.530000, 1810.048052, 1810.048052, 0.000000, X, Y) && !ellipse(18812.008000, 33413.334000, 3620.096104, 3620.096104, 0.000000, X, Y) && !ellipse(20225.048000, 31294.088000, 1089.176031, 1089.176031, 0.000000, X, Y) && !ellipse(20704.460000, 30661.116000, 1454.632042, 1454.632042, 0.000000, X, Y) && !ellipse(16915.764000, 35921.292000, 1874.952054, 1874.952054, 0.000000, X, Y) [Thu Jun 28 20:57:59 2012] Writing fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src8.gif [Thu Jun 28 21:04:56 2012] Mean detx,y = (-10414.75, -51.07) [Thu Jun 28 21:04:57 2012] Setting backscal keywords in source and bgd. spectrum [Thu Jun 28 21:05:11 2012] Binned source spectrum to 10 counts/bin [Thu Jun 28 21:05:11 2012] Setting source spectrum file to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Thu Jun 28 21:05:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src8_bgd.pi.gz [Thu Jun 28 23:25:38 2012] Updating aperture counts using extracted products [Thu Jun 28 23:25:38 2012] Error reading totcts from fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Thu Jun 28 23:25:38 2012] Calculating source flux in energy range 0.30-8.00 [Thu Jun 28 23:25:38 2012] Using photon index=1.80, rate=0.0119, arf fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src8.arf [Thu Jun 28 23:25:38 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 28 23:25:38 2012] Updating source flux to 1.7e-13 [Thu Jun 28 23:25:41 2012] Flag b found in src. 8 procflags, skipping spectral fitting [Thu Jun 28 23:25:41 2012] Flag c found in src. 8 procflags, skipping spectral fitting