[Tue Jun 26 10:39:52 2012] Detection parameters:
  Position = (394.9, 141.3) = 11 3 51.29 38 2 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.2 +/- 14.0
  Background counts = 22.2
  Rate = 0.004 +/- 0.0006

[Tue Jun 26 10:39:52 2012] Off-axis axis estimate = 13.37'
[Wed Jun 27 06:23:21 2012] Using EEF radius (= 13.11 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 06:23:21 2012] Initial guess for spatial extent in simple fitting = 13.11"
[Wed Jun 27 06:23:21 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.992
[Wed Jun 27 06:23:21 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 13.11"
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src18.ximg exists
[Wed Jun 27 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src18.csv
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Jun 27 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src18.csv
[Wed Jun 27 08:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Jun 27 08:18:29 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Jun 27 09:21:39 2012] Warning, spatial fit 18 centroid is now closest to src. 33
[Wed Jun 27 09:21:39 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 10.120472 pixels away
[Wed Jun 27 09:21:39 2012] Spatial fit model total counts = 381.301000, observed total counts = 381.000000
[Wed Jun 27 09:21:39 2012] Offset between fit and detection position for source 31 = 0.456757 pixels
[Wed Jun 27 09:21:39 2012] Warning, changing simple spatial fit ID from 18 to 29
[Wed Jun 27 09:21:39 2012] 382.335900 total counts/ 302.945000 bgd. counts: snr = 4.561302
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.456757 pixels
  Position = (394.5, 141.5) = 11 3 51.44 38 2 52.0
  Extent = 7.9 (5.5-17.2)", rotation angle = 0
  Source counts = 79.4 +/- 19.6
  Background counts = 302.9
  Rate = 0.004 +/- 0.0009
[Wed Jun 27 09:21:39 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:21:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:21:39 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 09:21:39 2012] Source does appear to be extended
[Wed Jun 27 09:21:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:21:39 2012] Source is confused with source 30
[Wed Jun 27 22:43:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 22:43:52 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Wed Jun 27 22:43:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.174
[Wed Jun 27 22:43:52 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.86"
[Thu Jun 28 01:47:13 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src17.ximg exists
[Thu Jun 28 01:47:13 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Jun 28 01:47:13 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src17 appears to have run properly
[Thu Jun 28 01:47:14 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Jun 28 01:47:14 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Jun 28 01:47:14 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Thu Jun 28 03:21:19 2012] Spatial fit model total counts = 540.245000, observed total counts = 545.000000
[Thu Jun 28 03:21:19 2012] Offset between fit and detection position for source 31 = 0.258313 pixels
[Thu Jun 28 03:21:19 2012] Warning, changing simple spatial fit ID from 17 to 12
[Thu Jun 28 03:21:19 2012] 543.988900 total counts/ 477.992000 bgd. counts: snr = 3.018653
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.258313 pixels
  Position = (394.4, 141.3) = 11 3 51.48 38 2 50.9
  Extent = 6.6 (5.1-12.9)", rotation angle = 0
  Source counts = 66.0 +/- 23.3
  Background counts = 478.0
  Rate = 0.003 +/- 0.001
[Thu Jun 28 03:21:19 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 03:21:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 03:21:19 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 03:21:19 2012] Source does appear to be extended
[Thu Jun 28 03:21:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 20:57:59 2012] XMMSAS src. selection expression = ellipse(34263.374000, 12240.374000, 394.906211, 394.906211, 0.000000, X, Y)
[Thu Jun 28 20:57:59 2012] Writing source region out to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src31_src.reg
[Thu Jun 28 20:57:59 2012] Extracting stamp from image fullrun_mos1_xmm0136540401_pi300-10000_cl_sm2.00.img.gz, (372, 119) - (417, 164)
[Thu Jun 28 20:57:59 2012] XMMSAS bgd. selection expression = annulus(34263.374000, 12240.374000, 658.177019, 1316.354038, X, Y) && !ellipse(30772.282000, 16783.344000, 3527.984102, 3527.984102, 0.000000, X, Y) && !ellipse(33943.050000, 12687.578000, 2905.664084, 2905.664084, 0.000000, X, Y) && !ellipse(33149.642000, 13713.636000, 1868.080054, 1868.080054, 0.000000, X, Y) && !ellipse(32850.662000, 14141.692000, 3154.168091, 3154.168091, 0.000000, X, Y) && !ellipse(33553.774000, 13163.950000, 1975.776057, 1975.776057, 0.000000, X, Y) && !ellipse(34609.568000, 11676.586000, 433.485612, 433.485612, 0.000000, X, Y) && !ellipse(34959.623800, 11254.069600, 2192.336063, 365.950411, 50.369000, X, Y) && !ellipse(35241.514000, 10904.664800, 2141.880062, 375.361611, 50.261600, X, Y)
[Thu Jun 28 20:57:59 2012] Writing fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src31.gif
[Thu Jun 28 21:06:20 2012] Mean detx,y = (14564.95, -96.54) 
[Thu Jun 28 21:06:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 21:06:34 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 21:06:34 2012] Setting source spectrum file to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Jun 28 21:06:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Jun 28 21:50:12 2012] Not generating rmf since there are only 65 counts
[Thu Jun 28 21:50:12 2012] rmf not generated due to insufficient counts
[Thu Jun 28 23:25:38 2012] Updating aperture counts using extracted products
[Thu Jun 28 23:25:38 2012] Error reading totcts from fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Jun 28 23:25:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:25:38 2012] Using photon index=1.80, rate=0.00303, arf fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src31.arf
[Thu Jun 28 23:25:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:25:38 2012] Updating source flux to 7.9e-14
[Thu Jun 28 23:25:41 2012] Flag c found in src. 31 procflags, skipping spectral fitting
[Thu Jun 28 23:25:41 2012] Source 31 has fewer than 100.000000 counts, skipping spectral fitting