[Tue Jun 26 10:39:52 2012] Detection parameters:
  Position = (382.0, 158.1) = 11 3 56.02 38 4 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.0 +/- 13.8
  Background counts = 25.3
  Rate = 0.004 +/- 0.0006

[Tue Jun 26 10:39:52 2012] Off-axis axis estimate = 11.84'
[Wed Jun 27 06:23:21 2012] Using EEF radius (= 12.35 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 06:23:21 2012] Initial guess for spatial extent in simple fitting = 12.35"
[Wed Jun 27 06:23:21 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.807
[Wed Jun 27 06:23:21 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 12.35"
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src19.ximg exists
[Wed Jun 27 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src19.csv
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Jun 27 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src19.csv
[Wed Jun 27 08:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Jun 27 08:18:29 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Jun 27 09:21:39 2012] Warning, spatial fit 19 centroid is now closest to src. 29
[Wed Jun 27 09:21:39 2012] Spatial fit model total counts = 360.087000, observed total counts = 361.000000
[Wed Jun 27 09:21:39 2012] Offset between fit and detection position for source 28 = 0.579143 pixels
[Wed Jun 27 09:21:39 2012] Warning, changing simple spatial fit ID from 19 to 24
[Wed Jun 27 09:21:39 2012] 365.349300 total counts/ 86.533300 bgd. counts: snr = 29.972713
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.579143 pixels
  Position = (381.4, 158.2) = 11 3 56.24 38 4 4.7
  Extent = 22.2 (18.2-24.1)", rotation angle = 0
  Source counts = 278.8 +/- 19.1
  Background counts = 86.5
  Rate = 0.01 +/- 0.0009
[Wed Jun 27 09:21:39 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:21:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:21:39 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 09:21:39 2012] Source does appear to be extended
[Wed Jun 27 09:21:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:21:39 2012] Source is confused with source 30
[Wed Jun 27 22:43:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 22:43:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 22:43:52 2012] Initial guess for spatial extent in simple fitting = 22.16"
[Wed Jun 27 22:43:52 2012] source mask rpix=5.1, npix_max = 125, mask sum = 121, frac = 0.967
[Wed Jun 27 22:43:52 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 22.16"
[Thu Jun 28 01:47:13 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src18.ximg exists
[Thu Jun 28 01:47:13 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu Jun 28 01:47:13 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src18 appears to have run properly
[Thu Jun 28 01:47:14 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu Jun 28 01:47:14 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Jun 28 01:47:14 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Thu Jun 28 03:21:19 2012] Warning, spatial fit 18 centroid is now closest to src. 26
[Thu Jun 28 03:21:19 2012] Spatial fit model total counts = 359.159000, observed total counts = 361.000000
[Thu Jun 28 03:21:19 2012] Offset between fit and detection position for source 28 = 0.147930 pixels
[Thu Jun 28 03:21:19 2012] Warning, changing simple spatial fit ID from 18 to 23
[Thu Jun 28 03:21:19 2012] 363.834700 total counts/ 54.501700 bgd. counts: snr = 41.900695
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.147930 pixels
  Position = (381.6, 158.2) = 11 3 56.18 38 4 4.7
  Extent = 23.4 (21.8-24.1)", rotation angle = 0
  Source counts = 309.3 +/- 19.1
  Background counts = 54.5
  Rate = 0.01 +/- 0.0009
[Thu Jun 28 03:21:19 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 03:21:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 03:21:19 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 03:21:19 2012] Source does appear to be extended
[Thu Jun 28 03:21:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 20:57:59 2012] XMMSAS src. selection expression = ellipse(33149.642000, 13713.636000, 1401.060040, 1401.060040, 0.000000, X, Y)
[Thu Jun 28 20:57:59 2012] Writing source region out to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src28_src.reg
[Thu Jun 28 20:57:59 2012] Extracting stamp from image fullrun_mos1_xmm0136540401_pi300-10000_cl_sm2.00.img.gz, (301, 78) - (462, 239)
[Thu Jun 28 20:57:59 2012] XMMSAS bgd. selection expression = annulus(33149.642000, 13713.636000, 2335.100067, 4670.200134, X, Y) && !ellipse(29854.088200, 18152.075000, 1049.336030, 1049.336030, 0.000000, X, Y) && !ellipse(31247.925960, 16354.365219, 1679.888048, 416.306945, 51.448188, X, Y) && !ellipse(31568.992200, 8651.135200, 457.884013, 457.884013, 0.000000, X, Y) && !ellipse(31739.336000, 15812.652000, 1769.728051, 1769.728051, 0.000000, X, Y) && !ellipse(30685.695200, 16954.148000, 1009.544029, 1009.544029, 0.000000, X, Y) && !ellipse(30772.282000, 16783.344000, 3527.984102, 3527.984102, 0.000000, X, Y) && !ellipse(33943.050000, 12687.578000, 2905.664084, 2905.664084, 0.000000, X, Y) && !ellipse(34263.374000, 12240.374000, 526.541615, 526.541615, 0.000000, X, Y) && !ellipse(32850.662000, 14141.692000, 3154.168091, 3154.168091, 0.000000, X, Y) && !ellipse(33553.774000, 13163.950000, 1975.776057, 1975.776057, 0.000000, X, Y) && !ellipse(34609.568000, 11676.586000, 433.485612, 433.485612, 0.000000, X, Y) && !ellipse(34959.623800, 11254.069600, 2192.336063, 365.950411, 50.369000, X, Y) && !ellipse(35241.514000, 10904.664800, 2141.880062, 375.361611, 50.261600, X, Y)
[Thu Jun 28 20:57:59 2012] Writing fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src28.gif
[Thu Jun 28 21:06:36 2012] Mean detx,y = (12773.54, -50.37) 
[Thu Jun 28 21:06:37 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 21:06:59 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 21:07:00 2012] Setting source spectrum file to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jun 28 21:07:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu Jun 28 23:25:38 2012] Updating aperture counts using extracted products
[Thu Jun 28 23:25:38 2012] Error reading totcts from fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jun 28 23:25:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:25:38 2012] Using photon index=1.80, rate=0.0142, arf fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src28.arf
[Thu Jun 28 23:25:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:25:38 2012] Updating source flux to 2.4e-13
[Thu Jun 28 23:25:41 2012] Flag c found in src. 28 procflags, skipping spectral fitting