[Tue Jun 26 10:39:52 2012] Detection parameters:
  Position = (345.4, 207.0) = 11 4 9.51 38 7 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.1 +/- 18.9
  Background counts = 39.8
  Rate = 0.01 +/- 0.001

[Tue Jun 26 10:39:52 2012] Off-axis axis estimate = 7.45'
[Wed Jun 27 06:23:21 2012] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 06:23:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 06:23:21 2012] Initial guess for spatial extent in simple fitting = 10.15"
[Wed Jun 27 06:23:21 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.934
[Wed Jun 27 06:23:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.15"
[Wed Jun 27 08:18:28 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 27 08:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 08:18:28 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 27 08:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 08:18:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 27 08:18:29 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 27 09:21:39 2012] Spatial fit model total counts = 747.935000, observed total counts = 746.000000
[Wed Jun 27 09:21:39 2012] Offset between fit and detection position for source 20 = 2.953984 pixels
[Wed Jun 27 09:21:39 2012] 718.571000 total counts/ 352.900000 bgd. counts: snr = 19.465461
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.953984 pixels
  Position = (343.7, 209.4) = 11 4 10.14 38 7 47.8
  Extent = 14.0 (11.5-18.5)", rotation angle = 0
  Source counts = 365.7 +/- 26.8
  Background counts = 352.9
  Rate = 0.02 +/- 0.001
[Wed Jun 27 09:21:39 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:21:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:21:39 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 09:21:39 2012] Source does appear to be extended
[Wed Jun 27 09:21:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 22:43:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 22:43:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 22:43:52 2012] Initial guess for spatial extent in simple fitting = 13.99"
[Wed Jun 27 22:43:52 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.887
[Wed Jun 27 22:43:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.99"
[Thu Jun 28 01:47:13 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 28 01:47:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src1.csv
[Thu Jun 28 01:47:13 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 28 01:47:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src1.csv
[Thu Jun 28 01:47:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 01:47:13 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 28 01:47:13 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 28 01:47:13 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 28 03:21:19 2012] Spatial fit model total counts = 984.630000, observed total counts = 935.000000
[Thu Jun 28 03:21:19 2012] Offset between fit and detection position for source 20 = 0.235744 pixels
[Thu Jun 28 03:21:19 2012] 978.533000 total counts/ 668.116000 bgd. counts: snr = 12.009352
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.235744 pixels
  Position = (343.7, 209.2) = 11 4 10.12 38 7 46.8
  Extent = 13.1 (11.3-15.6)", rotation angle = 0
  Source counts = 310.4 +/- 31.3
  Background counts = 668.1
  Rate = 0.01 +/- 0.001
[Thu Jun 28 03:21:19 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 03:21:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 03:21:19 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 03:21:19 2012] Source does appear to be extended
[Thu Jun 28 03:21:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 03:21:19 2012] Source is confused with source 22
[Thu Jun 28 20:57:59 2012] XMMSAS src. selection expression = ellipse(29854.088200, 18152.075000, 787.002023, 787.002023, 0.000000, X, Y)
[Thu Jun 28 20:57:59 2012] Writing source region out to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src20_src.reg
[Thu Jun 28 20:57:59 2012] Extracting stamp from image fullrun_mos1_xmm0136540401_pi300-10000_cl_sm2.00.img.gz, (298, 164) - (389, 254)
[Thu Jun 28 20:57:59 2012] XMMSAS bgd. selection expression = annulus(29854.088200, 18152.075000, 1311.670038, 2623.340075, X, Y) && !ellipse(31247.925960, 16354.365219, 1679.888048, 416.306945, 51.448188, X, Y) && !ellipse(31739.336000, 15812.652000, 1769.728051, 1769.728051, 0.000000, X, Y) && !ellipse(30685.695200, 16954.148000, 1009.544029, 1009.544029, 0.000000, X, Y) && !ellipse(30772.282000, 16783.344000, 3527.984102, 3527.984102, 0.000000, X, Y) && !ellipse(33943.050000, 12687.578000, 2905.664084, 2905.664084, 0.000000, X, Y) && !ellipse(33149.642000, 13713.636000, 1868.080054, 1868.080054, 0.000000, X, Y) && !ellipse(32850.662000, 14141.692000, 3154.168091, 3154.168091, 0.000000, X, Y)
[Thu Jun 28 20:57:59 2012] Writing fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src20.gif
[Thu Jun 28 20:58:02 2012] Mean detx,y = (7271.76, 13.15) 
[Thu Jun 28 20:58:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 20:58:17 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 20:58:17 2012] Setting source spectrum file to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jun 28 20:58:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Jun 28 23:25:37 2012] Updating aperture counts using extracted products
[Thu Jun 28 23:25:37 2012] Error reading totcts from fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jun 28 23:25:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:25:38 2012] Using photon index=1.80, rate=0.0142, arf fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src20.arf
[Thu Jun 28 23:25:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:25:38 2012] Updating source flux to 1.8e-13
[Thu Jun 28 23:25:41 2012] Flag c found in src. 20 procflags, skipping spectral fitting
[Thu Jun 28 23:28:03 2012] Reading fit data from xmm0136540401/analysis//spectral/fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src20_pl.csv
[Thu Jun 28 23:28:03 2012] Spectral fit parameter nH value = 1.78611e+13
[Thu Jun 28 23:28:03 2012] Spectral fit parameter PhoIndex value = 2.05985
[Thu Jun 28 23:28:03 2012] Failed to get F(0.3-8.0) from xmm0136540401/analysis//spectral/fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src20_pl.csv, possibly due to different flux energy range selected
[Thu Jun 28 23:28:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:28:03 2012] Using Nh = 1.8e+13, photon index=2.06, rate=0.0142, arf fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src20.arf
[Thu Jun 28 23:28:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:28:03 2012] Updating source flux to 1.6e-13