[Tue Jun 26 10:39:51 2012] Detection parameters:
  Position = (200.9, 407.0) = 11 5 2.88 38 22 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.8 +/- 12.0
  Background counts = 21.2
  Rate = 0.002 +/- 0.0005

[Tue Jun 26 10:39:52 2012] Off-axis axis estimate = 10.58'
[Wed Jun 27 06:23:21 2012] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 06:23:21 2012] Initial guess for spatial extent in simple fitting = 11.72"
[Wed Jun 27 06:23:21 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.882
[Wed Jun 27 06:23:21 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 11.72"
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src32.ximg exists
[Wed Jun 27 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src32.csv
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src32_1.ximg exists
[Wed Jun 27 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src32.csv
[Wed Jun 27 08:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 08:18:30 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Wed Jun 27 08:18:30 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Wed Jun 27 08:18:30 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Wed Jun 27 09:21:39 2012] Spatial fit model total counts = 343.801000, observed total counts = 340.000000
[Wed Jun 27 09:21:39 2012] Offset between fit and detection position for source 2 = 8.759561 pixels
[Wed Jun 27 09:21:39 2012] 334.486000 total counts/ 108.254000 bgd. counts: snr = 21.743630
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 8.759561 pixels
  Position = (195.0, 413.4) = 11 5 5.08 38 22 34.9
  Extent = 23.4 (23.4-46.9)", rotation angle = 0
  Source counts = 226.2 +/- 18.3
  Background counts = 108.3
  Rate = 0.01 +/- 0.0008
[Wed Jun 27 09:21:39 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:21:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:21:39 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 09:21:39 2012] Source does appear to be extended
[Wed Jun 27 09:21:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 22:43:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 22:43:52 2012] Initial guess for spatial extent in simple fitting = 23.44"
[Wed Jun 27 22:43:52 2012] source mask rpix=5.4, npix_max = 138, mask sum = 132, frac = 0.952
[Wed Jun 27 22:43:52 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 23.44"
[Thu Jun 28 01:47:13 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src31.ximg exists
[Thu Jun 28 01:47:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src31.csv
[Thu Jun 28 01:47:13 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Jun 28 01:47:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src31.csv
[Thu Jun 28 01:47:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 01:47:14 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Jun 28 01:47:14 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Jun 28 01:47:14 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Thu Jun 28 03:21:19 2012] Warning, spatial fit 31 centroid is now closest to src. 3
[Thu Jun 28 03:21:19 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 03:21:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 03:21:19 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 03:21:19 2012] Source does appear to be extended
[Thu Jun 28 03:21:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 20:58:00 2012] XMMSAS src. selection expression = ellipse(16915.764000, 35921.292000, 1406.214040, 1406.214040, 0.000000, X, Y)
[Thu Jun 28 20:58:00 2012] Writing source region out to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 28 20:58:00 2012] Extracting stamp from image fullrun_mos1_xmm0136540401_pi300-10000_cl_sm2.00.img.gz, (114, 333) - (276, 494)
[Thu Jun 28 20:58:00 2012] XMMSAS bgd. selection expression = annulus(16915.764000, 35921.292000, 2343.690067, 4687.380135, X, Y) && !ellipse(20628.256800, 30692.436600, 614.366418, 301.035209, 128.327000, X, Y) && !ellipse(19175.810000, 33060.244000, 1464.064042, 1464.064042, 0.000000, X, Y) && !ellipse(19569.870000, 32483.064000, 1674.584048, 1674.584048, 0.000000, X, Y) && !ellipse(20903.790000, 30442.218000, 1907.152055, 1907.152055, 0.000000, X, Y) && !ellipse(17831.112457, 34836.168884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20524.466000, 31060.540000, 1565.776045, 1565.776045, 0.000000, X, Y) && !ellipse(18135.856000, 34363.530000, 1810.048052, 1810.048052, 0.000000, X, Y) && !ellipse(18812.008000, 33413.334000, 3620.096104, 3620.096104, 0.000000, X, Y) && !ellipse(20225.048000, 31294.088000, 1089.176031, 1089.176031, 0.000000, X, Y) && !ellipse(20704.460000, 30661.116000, 1454.632042, 1454.632042, 0.000000, X, Y)
[Thu Jun 28 20:58:00 2012] Writing fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src2.gif
[Thu Jun 28 21:16:36 2012] Mean detx,y = (-14606.85, 43.05) 
[Thu Jun 28 21:16:37 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 21:17:10 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 21:17:10 2012] Setting source spectrum file to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 28 21:17:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 28 23:25:38 2012] Updating aperture counts using extracted products
[Thu Jun 28 23:25:38 2012] Error reading totcts from fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 28 23:25:39 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:25:39 2012] Using photon index=1.80, rate=0.0104, arf fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src2.arf
[Thu Jun 28 23:25:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:25:39 2012] Updating source flux to 2.1e-13