[Tue Jun 26 10:39:51 2012] Detection parameters:
  Position = (244.1, 347.9) = 11 4 46.87 38 17 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.1 +/- 13.4
  Background counts = 41.8
  Rate = 0.004 +/- 0.0008

[Tue Jun 26 10:39:52 2012] Off-axis axis estimate = 5.33'
[Wed Jun 27 06:23:21 2012] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 06:23:21 2012] Initial guess for spatial extent in simple fitting = 9.09"
[Wed Jun 27 06:23:21 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.932
[Wed Jun 27 06:23:21 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 9.09"
[Wed Jun 27 08:18:28 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src14.ximg exists
[Wed Jun 27 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src14.csv
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Jun 27 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src14.csv
[Wed Jun 27 08:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Jun 27 08:18:29 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Jun 27 08:18:29 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Jun 27 09:21:39 2012] Warning, spatial fit 14 centroid is now closest to src. 13
[Wed Jun 27 09:21:39 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 09:21:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 09:21:39 2012] Assessing source extent using major
[Wed Jun 27 09:21:39 2012] Source does appear to be extended
[Wed Jun 27 09:21:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 09:21:39 2012] Source is confused with source 10
[Wed Jun 27 22:43:52 2012] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 22:43:52 2012] Initial guess for spatial extent in simple fitting = 9.09"
[Wed Jun 27 22:43:52 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.932
[Wed Jun 27 22:43:52 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 9.09"
[Thu Jun 28 01:47:13 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src14.ximg exists
[Thu Jun 28 01:47:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src14.csv
[Thu Jun 28 01:47:13 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Jun 28 01:47:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src14.csv
[Thu Jun 28 01:47:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 01:47:14 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Jun 28 01:47:14 2012] fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Jun 28 01:47:14 2012] Fit fullrun_mos1_xmm0136540401_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Jun 28 03:21:19 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 15.842166 pixels away
[Thu Jun 28 03:21:19 2012] Warning, spatial fit 14 centroid is now closest to src. 13
[Thu Jun 28 03:21:19 2012] Spatial fit model total counts = 1049.310000, observed total counts = 1055.000000
[Thu Jun 28 03:21:19 2012] Offset between fit and detection position for source 12 = 4.179376 pixels
[Thu Jun 28 03:21:19 2012] Warning, changing simple spatial fit ID from 14 to 19
[Thu Jun 28 03:21:19 2012] 1043.899000 total counts/ 563.262000 bgd. counts: snr = 20.251723
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 4.179376 pixels
  Position = (240.8, 350.5) = 11 4 48.10 38 18 1.2
  Extent = 23.8 (20.3-30.2)", rotation angle = 0
  Source counts = 480.6 +/- 32.3
  Background counts = 563.3
  Rate = 0.02 +/- 0.001
[Thu Jun 28 03:21:19 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 03:21:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 03:21:19 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 03:21:19 2012] Source does appear to be extended
[Thu Jun 28 03:21:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 20:57:59 2012] XMMSAS src. selection expression = ellipse(20903.790000, 30442.218000, 1430.364041, 1430.364041, 0.000000, X, Y)
[Thu Jun 28 20:57:59 2012] Writing source region out to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src12_src.reg
[Thu Jun 28 20:57:59 2012] Extracting stamp from image fullrun_mos1_xmm0136540401_pi300-10000_cl_sm2.00.img.gz, (159, 268) - (323, 433)
[Thu Jun 28 20:57:59 2012] XMMSAS bgd. selection expression = annulus(20903.790000, 30442.218000, 2383.940069, 4767.880137, X, Y) && !ellipse(20628.256800, 30692.436600, 614.366418, 301.035209, 128.327000, X, Y) && !ellipse(19175.810000, 33060.244000, 1464.064042, 1464.064042, 0.000000, X, Y) && !ellipse(19569.870000, 32483.064000, 1674.584048, 1674.584048, 0.000000, X, Y) && !ellipse(17831.112457, 34836.168884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20524.466000, 31060.540000, 1565.776045, 1565.776045, 0.000000, X, Y) && !ellipse(18135.856000, 34363.530000, 1810.048052, 1810.048052, 0.000000, X, Y) && !ellipse(18812.008000, 33413.334000, 3620.096104, 3620.096104, 0.000000, X, Y) && !ellipse(20225.048000, 31294.088000, 1089.176031, 1089.176031, 0.000000, X, Y) && !ellipse(20704.460000, 30661.116000, 1454.632042, 1454.632042, 0.000000, X, Y) && !ellipse(16915.764000, 35921.292000, 1874.952054, 1874.952054, 0.000000, X, Y)
[Thu Jun 28 20:57:59 2012] Writing fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src12.gif
[Thu Jun 28 21:05:14 2012] Mean detx,y = (-7903.76, 34.46) 
[Thu Jun 28 21:05:15 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 21:05:53 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 21:05:53 2012] Setting source spectrum file to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 28 21:05:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jun 28 23:25:38 2012] Updating aperture counts using extracted products
[Thu Jun 28 23:25:38 2012] Error reading totcts from fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 28 23:25:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 23:25:38 2012] Using photon index=1.80, rate=0.022, arf fullrun_mos1_xmm0136540401_pi300-10000_pass1_cl_src12.arf
[Thu Jun 28 23:25:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 23:25:38 2012] Updating source flux to 2.6e-13
[Thu Jun 28 23:25:41 2012] Flag c found in src. 12 procflags, skipping spectral fitting