[Fri Aug 10 01:34:36 2012] Detection parameters:
  Position = (250.2, 391.9) = 11 4 45.56 38 17 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.3 +/- 12.7
  Background counts = 25.9
  Rate = 0.004 +/- 0.0006

[Fri Aug 10 01:34:37 2012] Off-axis axis estimate = 7.63'
[Fri Aug 10 08:21:54 2012] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 08:21:54 2012] Initial guess for spatial extent in simple fitting = 10.24"
[Fri Aug 10 08:21:54 2012] source mask rpix=2.4, npix_max = 32, mask sum = 20, frac = 0.614
[Fri Aug 10 08:21:54 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.24"
[Fri Aug 10 14:19:37 2012] fullrun_mos2_xmm0136540101_pi300-10000_cl_pass0_src15.ximg exists
[Fri Aug 10 14:19:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540101_pi300-10000_cl_pass0_src15.csv
[Fri Aug 10 14:19:37 2012] fullrun_mos2_xmm0136540101_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Aug 10 14:19:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540101_pi300-10000_cl_pass0_src15.csv
[Fri Aug 10 14:19:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 14:19:38 2012] fullrun_mos2_xmm0136540101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Aug 10 14:19:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Aug 10 14:19:38 2012] fullrun_mos2_xmm0136540101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Aug 10 14:19:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Aug 10 14:19:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 14:20:07 2012] Source 29 is offset by -0.611307 and 1.726023 pixels which is larger than
2 X fitted extent = 1.222308 x 1.222308, not incorporating fit results
[Fri Aug 10 14:20:07 2012] Warning, spatial fit 15 centroid is now closest to src. 27
[Fri Aug 10 14:20:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 14:20:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 14:20:08 2012] Assessing source extent using major
[Fri Aug 10 14:20:08 2012] Source does appear to be extended
[Fri Aug 10 14:20:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 14:20:08 2012] Source is confused with source 28
[Fri Aug 10 20:32:28 2012] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 20:32:28 2012] Initial guess for spatial extent in simple fitting = 10.24"
[Fri Aug 10 20:32:28 2012] source mask rpix=2.4, npix_max = 32, mask sum = 20, frac = 0.614
[Fri Aug 10 20:32:28 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 10.24"
[Fri Aug 10 23:48:05 2012] fullrun_mos2_xmm0136540101_pi300-10000_cl_pass1_src12.ximg exists
[Fri Aug 10 23:48:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540101_pi300-10000_cl_pass1_src12.csv
[Fri Aug 10 23:48:05 2012] fullrun_mos2_xmm0136540101_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Aug 10 23:48:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540101_pi300-10000_cl_pass1_src12.csv
[Fri Aug 10 23:48:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 23:48:05 2012] fullrun_mos2_xmm0136540101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Aug 10 23:48:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Aug 10 23:48:05 2012] fullrun_mos2_xmm0136540101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Aug 10 23:48:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Aug 10 23:48:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 23:48:27 2012] Spatial fit model total counts = 1598.240000, observed total counts = 1545.000000
[Fri Aug 10 23:48:27 2012] Offset between fit and detection position for source 29 = 0.447980 pixels
[Fri Aug 10 23:48:27 2012] Warning, changing simple spatial fit ID from 12 to 7
[Fri Aug 10 23:48:27 2012] 1598.790600 total counts/ 64.720600 bgd. counts: snr = 190.688240
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.447980 pixels
  Position = (250.5, 392.2) = 11 4 45.44 38 17 42.5
  Extent = 40.8 (40.8-81.7)", rotation angle = 0
  Source counts = 1534.1 +/- 40.0
  Background counts = 64.7
  Rate = 0.04 +/- 0.001
[Fri Aug 10 23:48:27 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 23:48:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 23:48:27 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 23:48:27 2012] Source does appear to be extended
[Fri Aug 10 23:48:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 20:42:28 2012] Counts = 1534.070000, rescaling region sizes by 2.000000
[Sat Aug 11 20:42:28 2012] XMMSAS src. selection expression = ellipse(21746.652000, 34075.064000, 4901.268141, 4901.268141, 0.000000, X, Y)
[Sat Aug 11 20:42:28 2012] Writing source region out to fullrun_mos2_xmm0136540101_pi300-10000_pass1_cl_src29_src.reg
[Sat Aug 11 20:42:28 2012] Extracting stamp from image fullrun_mos2_xmm0136540101_pi300-10000_cl_sm2.00.img.gz, (0, 111) - (532, 595)
[Sat Aug 11 20:42:28 2012] XMMSAS bgd. selection expression = annulus(21746.652000, 34075.064000, 16337.560470, 32675.120940, X, Y) && !ellipse(26015.444320, 27867.665200, 2806.056081, 2806.056081, 0.000000, X, Y) && !ellipse(25874.961792, 27247.925232, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(26879.638153, 28230.209076, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26402.688690, 28825.501160, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28195.967163, 37797.713348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21586.380000, 34208.228000, 3587.776103, 3587.776103, 0.000000, X, Y) && !ellipse(22092.264000, 33918.186000, 1594.072046, 1594.072046, 0.000000, X, Y) && !ellipse(21401.280000, 34691.018000, 3424.328099, 3424.328099, 0.000000, X, Y) && !ellipse(18134.828820, 39713.739021, 1827.472053, 503.900075, 57.472771, X, Y) && !ellipse(20099.098000, 36537.850000, 1784.192051, 1784.192051, 0.000000, X, Y) && !ellipse(19128.488000, 38155.912000, 2108.968061, 2108.968061, 0.000000, X, Y) && !ellipse(18784.143200, 38701.923000, 1999.360058, 671.980019, 52.962000, X, Y) && !ellipse(19616.356000, 37320.918000, 2183.264063, 2183.264063, 0.000000, X, Y) && !ellipse(42258.367004, 31772.958038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19853.392000, 37005.600000, 1899.656055, 962.368028, 235.296000, X, Y) && !ellipse(19860.303700, 36740.531200, 1847.520053, 259.006407, 236.407000, X, Y) && !ellipse(36401.295380, 40928.088470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17592.214000, 40403.236000, 2329.408067, 2329.408067, 0.000000, X, Y) && !ellipse(16798.971146, 41687.179932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20652.050000, 36010.756000, 1542.976044, 1542.976044, 0.000000, X, Y) && !ellipse(20403.228000, 36121.210000, 1747.144050, 1747.144050, 0.000000, X, Y) && !ellipse(31745.635132, 12578.074600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20720.436000, 35587.408000, 1793.888052, 1793.888052, 0.000000, X, Y)
[Sat Aug 11 20:42:28 2012] Writing fullrun_mos2_xmm0136540101_pi300-10000_pass1_cl_src29.gif
[Sat Aug 11 21:48:25 2012] Mean detx,y = (52.92, 9101.07) 
[Sat Aug 11 21:48:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 21:59:43 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 21:59:43 2012] Setting source spectrum file to fullrun_mos2_xmm0136540101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Aug 11 21:59:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun Aug 12 04:27:41 2012] Updating aperture counts using extracted products
[Sun Aug 12 04:27:42 2012] Error reading totcts from fullrun_mos2_xmm0136540101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Aug 12 04:27:45 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 04:27:45 2012] Using photon index=1.80, rate=0.0412, arf fullrun_mos2_xmm0136540101_pi300-10000_pass1_cl_src29.arf
[Sun Aug 12 04:27:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 04:27:45 2012] Getting flux using calc_pl_flux failed
[Sun Aug 12 04:34:39 2012] Flag b found in src. 29 procflags, skipping spectral fitting
[Sun Aug 12 04:34:39 2012] Flag c found in src. 29 procflags, skipping spectral fitting