[Wed May 22 10:37:12 2013] Detection parameters:
  Position = (402.3, 326.2) = 18 0 34.49 -25 41 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.6 +/- 18.6
  Background counts = 91.6
  Rate = 0.005 +/- 0.0009

[Wed May 22 10:37:17 2013] Off-axis axis estimate = 7.80'
[Wed May 22 10:38:26 2013] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:38:26 2013] Initial guess for spatial extent in simple fitting = 10.33"
[Wed May 22 10:38:26 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.090
[Wed May 22 10:38:26 2013] Giving source the simple spatial ID 93 for pass 0, mean size = 10.33"
[Wed May 22 10:38:29 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src93.ximg exists
[Wed May 22 10:38:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src93.csv
[Wed May 22 10:38:29 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src93_1.ximg exists
[Wed May 22 10:38:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src93.csv
[Wed May 22 10:38:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:38:33 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Wed May 22 10:38:33 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Wed May 22 10:38:33 2013] Fit fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Wed May 22 10:39:18 2013] Source 93 is offset by -0.030044 and -4.418503 pixels which is larger than
2 X fitted extent = 1.168474 x 1.168474, not incorporating fit results
[Wed May 22 10:39:18 2013] Warning, spatial fit 93 centroid is now closest to src. 85
[Wed May 22 10:39:18 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:39:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:39:18 2013] Assessing source extent using major
[Wed May 22 10:39:18 2013] Source does appear to be extended
[Wed May 22 10:39:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:40:08 2013] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:40:08 2013] Initial guess for spatial extent in simple fitting = 10.33"
[Wed May 22 10:40:08 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.090
[Wed May 22 10:40:08 2013] Giving source the simple spatial ID 85 for pass 1, mean size = 10.33"
[Wed May 22 10:40:11 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src85.ximg exists
[Wed May 22 10:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src85.csv
[Wed May 22 10:40:11 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src85_1.ximg exists
[Wed May 22 10:40:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src85.csv
[Wed May 22 10:40:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:40:16 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Wed May 22 10:40:16 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Wed May 22 10:40:16 2013] Fit fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src85 appears to have run properly
[Wed May 22 10:40:54 2013] Spatial fit model total counts = 1960.080000, observed total counts = 1956.000000
[Wed May 22 10:40:54 2013] Offset between fit and detection position for source 93 = 9.434134 pixels
[Wed May 22 10:40:54 2013] Warning, changing simple spatial fit ID from 85 to 75
[Wed May 22 10:40:54 2013] 1708.982000 total counts/ 990.938000 bgd. counts: snr = 22.810133
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 9.434134 pixels
  Position = (404.2, 335.5) = 18 0 33.89 -25 40 38.4
  Extent = 20.5 (20.5-41.0)", rotation angle = 0
  Source counts = 718.0 +/- 41.3
  Background counts = 990.9
  Rate = 0.04 +/- 0.002
[Wed May 22 10:40:54 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:40:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:40:54 2013] Assessing source extent using major axis lower bound
[Wed May 22 10:40:54 2013] Source does appear to be extended
[Wed May 22 10:40:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:40:54 2013] Source is confused with source 39
[Wed May 22 10:41:33 2013] XMMSAS src. selection expression = ellipse(35117.334000, 29138.011600, 1231.056035, 1231.056035, 0.000000, X, Y)
[Wed May 22 10:41:33 2013] Not overwriting source region fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93_src.reg
[Wed May 22 10:41:33 2013] Extracting stamp from image fullrun_pn_xmm0136140201_pi300-10000_cl_sm2.00.img.gz, (333, 265) - (475, 406)
[Wed May 22 10:41:34 2013] XMMSAS bgd. selection expression = annulus(35117.334000, 29138.011600, 2051.760059, 4103.520118, X, Y) && !ellipse(37319.375305, 31517.124725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38168.140381, 31529.367065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33470.132416, 31288.285095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35004.374000, 31390.165600, 1001.752029, 1001.752029, 0.000000, X, Y) && !ellipse(36488.125458, 31367.691711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34360.190000, 30802.550000, 1842.184053, 680.857337, 348.639000, X, Y) && !ellipse(32853.260000, 30843.840000, 3364.128097, 3364.128097, 0.000000, X, Y) && !ellipse(38310.638458, 30752.197510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36338.404000, 30494.360000, 363.242410, 363.242410, 0.000000, X, Y) && !ellipse(33875.194000, 30515.756000, 1682.064048, 1682.064048, 0.000000, X, Y) && !ellipse(31870.822000, 30377.927200, 1489.816043, 1489.816043, 0.000000, X, Y) && !ellipse(34951.925507, 30131.475555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31365.010000, 30135.189200, 350.398410, 350.398410, 0.000000, X, Y) && !ellipse(35919.856000, 30068.520000, 455.904813, 455.904813, 0.000000, X, Y) && !ellipse(30580.126800, 29836.647400, 1449.640042, 1449.640042, 0.000000, X, Y) && !ellipse(32979.984802, 30144.878143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36743.125092, 29884.735718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32001.874664, 29683.707520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40969.894000, 29041.202000, 2064.168059, 2064.168059, 0.000000, X, Y) && !ellipse(30484.946000, 29835.666000, 1336.280038, 638.867218, -0.000000, X, Y) && !ellipse(34160.272766, 29446.727570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31264.635040, 29293.967600, 547.760816, 547.760816, 0.000000, X, Y) && !ellipse(36380.033905, 29449.441010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33621.778848, 29144.313000, 415.948012, 415.948012, 0.000000, X, Y) && !ellipse(30725.071075, 29117.421631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34571.520000, 28944.148000, 341.905610, 341.905610, 0.000000, X, Y) && !ellipse(36470.551819, 28778.820435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33204.552000, 28870.486000, 578.759217, 578.759217, 0.000000, X, Y) && !ellipse(31840.796000, 28206.187200, 1423.808041, 1423.808041, 0.000000, X, Y) && !ellipse(31468.426178, 27992.116669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30367.188000, 27653.673400, 1383.040040, 1383.040040, 0.000000, X, Y) && !ellipse(33782.073800, 28351.686400, 492.064014, 492.064014, 0.000000, X, Y) && !ellipse(33178.241150, 27963.630859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31827.534821, 27272.062103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30663.108002, 26886.381927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30261.813599, 26778.603668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38998.034000, 31669.306000, 335.528810, 335.528810, 0.000000, X, Y)
[Wed May 22 10:41:34 2013] Writing fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93.gif
[Wed May 22 10:41:51 2013] ../../xmm0136140201/products/events/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93_src.evt and ../../xmm0136140201/products/events/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93_bgd.evt exist, delete to re-create
[Wed May 22 10:41:51 2013] Mean detx,y = (-10302.05, 4514.63) 
[Wed May 22 10:41:51 2013] ../../xmm0136140201/products/images/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93_src.img and ../../xmm0136140201/products/images/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93_bgd.img exist, delete to re-create
[Wed May 22 10:41:51 2013] ../../xmm0136140201/products/spectra/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93_src_b10.pi.gz and ../../xmm0136140201/products/spectra/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93_bgd.pi exist, delete to re-create
[Wed May 22 10:41:51 2013] Setting source spectrum file to fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Wed May 22 10:41:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93_bgd.pi.gz
[Wed May 22 10:41:51 2013] ../../xmm0136140201/products/lightcurves/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93_src.lc and ../../xmm0136140201/products/lightcurves/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93_bgd.lc exist, delete to re-create
[Wed May 22 10:42:26 2013] fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93.rmf exists, delete to re-create
[Wed May 22 10:42:26 2013] fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93.arf exists, delete to re-create
[Wed May 22 13:14:52 2013] Updating aperture counts using extracted products
[Wed May 22 13:14:52 2013] Total counts from fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93_src_b10.pi.gz = 4265.00
[Wed May 22 13:14:53 2013] Total counts from fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93_bgd.pi.gz = 4904.00
[Wed May 22 13:14:53 2013] Got source and background scale factors 4764800.000000, 14574574.000000
[Wed May 22 13:14:53 2013] User source parameters:
  Position = (404.2, 335.5) = 18 0 33.89 -25 40 38.4
  Extent = 20.5 (20.5-41.0)", rotation angle = 0
  Source aperture counts = 2661.8 +/- 66.3
  Background aperture counts = 1603.2
  Rate = 0.1 +/- 0.004

[Wed May 22 13:15:14 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:15:14 2013] Using photon index=1.80, rate=0.0391, arf fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93.arf
[Wed May 22 13:15:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:15:14 2013] Updating source flux to 4.1e-13
[Wed May 22 13:15:57 2013] Flag b found in src. 93 procflags, skipping spectral fitting
[Wed May 22 13:15:57 2013] Flag c found in src. 93 procflags, skipping spectral fitting
[Wed May 22 13:16:35 2013] xmm0136140201/analysis//spectral/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src93_pl.csv not found, spectral fit skipped or did not complete