[Wed May 22 10:37:07 2013] Detection parameters:
  Position = (431.4, 341.9) = 18 0 25.14 -25 40 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.8 +/- 18.3
  Background counts = 72.2
  Rate = 0.007 +/- 0.0009

[Wed May 22 10:37:17 2013] Off-axis axis estimate = 10.14'
[Wed May 22 10:38:26 2013] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:38:26 2013] Initial guess for spatial extent in simple fitting = 11.50"
[Wed May 22 10:38:26 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.911
[Wed May 22 10:38:26 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 11.50"
[Wed May 22 10:38:28 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src48.ximg exists
[Wed May 22 10:38:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src48.csv
[Wed May 22 10:38:28 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src48_1.ximg exists
[Wed May 22 10:38:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src48.csv
[Wed May 22 10:38:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:38:31 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Wed May 22 10:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src48.csv
[Wed May 22 10:38:31 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Wed May 22 10:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src48.csv
[Wed May 22 10:38:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:39:18 2013] Warning, spatial fit 48 centroid is now closest to src. 21
[Wed May 22 10:39:18 2013] Spatial fit model total counts = 1149.540000, observed total counts = 1148.000000
[Wed May 22 10:39:18 2013] Offset between fit and detection position for source 48 = 0.421085 pixels
[Wed May 22 10:39:18 2013] Warning, changing simple spatial fit ID from 48 to 71
[Wed May 22 10:39:18 2013] 1134.852500 total counts/ 1089.780000 bgd. counts: snr = 1.365344
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.421085 pixels
  Position = (431.1, 342.2) = 18 0 25.24 -25 40 8.9
  Extent = 4.4 (2.9-8.9)", rotation angle = 0
  Source counts = 45.1 +/- 33.7
  Background counts = 1089.8
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability