[Wed May 22 10:37:07 2013] Detection parameters:
  Position = (265.4, 345.9) = 18 1 18.54 -25 39 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.7 +/- 27.9
  Background counts = 277.0
  Rate = 0.01 +/- 0.002

[Wed May 22 10:37:17 2013] Off-axis axis estimate = 4.19'
[Wed May 22 10:38:26 2013] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:38:26 2013] Initial guess for spatial extent in simple fitting = 8.53"
[Wed May 22 10:38:26 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.033
[Wed May 22 10:38:26 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 8.53"
[Wed May 22 10:38:28 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src41.ximg exists
[Wed May 22 10:38:28 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src41.csv
[Wed May 22 10:38:28 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src41_1.ximg exists
[Wed May 22 10:38:28 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src41.csv
[Wed May 22 10:38:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:38:31 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Wed May 22 10:38:31 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Wed May 22 10:38:31 2013] Fit fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Wed May 22 10:39:17 2013] Source 41 is offset by 2.321321 and 5.040587 pixels which is larger than
2 X fitted extent = 1.013733 x 1.013733, not incorporating fit results
[Wed May 22 10:39:18 2013] Warning, spatial fit 41 centroid is now closest to src. 31
[Wed May 22 10:39:18 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:39:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:39:18 2013] Assessing source extent using major
[Wed May 22 10:39:18 2013] Source does appear to be extended
[Wed May 22 10:39:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:39:18 2013] Source is confused with source 30
[Wed May 22 10:40:08 2013] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:40:08 2013] Initial guess for spatial extent in simple fitting = 8.53"
[Wed May 22 10:40:08 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.033
[Wed May 22 10:40:08 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 8.53"
[Wed May 22 10:40:10 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src37.ximg exists
[Wed May 22 10:40:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src37.csv
[Wed May 22 10:40:10 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src37_1.ximg exists
[Wed May 22 10:40:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src37.csv
[Wed May 22 10:40:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:40:12 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Wed May 22 10:40:12 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Wed May 22 10:40:12 2013] Fit fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Wed May 22 10:40:54 2013] Warning, spatial fit 37 centroid is now closest to src. 31
[Wed May 22 10:40:54 2013] Source 41 is offset by -4.379346 and 3.413254 pixels which is larger than
2 X fitted extent = 1.559816 x 1.559816, not incorporating fit results
[Wed May 22 10:40:54 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:40:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:40:54 2013] Assessing source extent using major
[Wed May 22 10:40:54 2013] Source does appear to be extended
[Wed May 22 10:40:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:41:31 2013] XMMSAS src. selection expression = ellipse(23044.012909, 30047.473083, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 10:41:31 2013] Not overwriting source region fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41_src.reg
[Wed May 22 10:41:31 2013] Extracting stamp from image fullrun_pn_xmm0136140201_pi300-10000_cl_sm2.00.img.gz, (228, 308) - (303, 383)
[Wed May 22 10:41:31 2013] XMMSAS bgd. selection expression = annulus(23044.012909, 30047.473083, 1087.500000, 2175.000000, X, Y) && !ellipse(20548.091553, 30921.952118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22678.526886, 30149.646576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24040.142731, 29786.603180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20268.493073, 29774.236053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25687.168915, 29552.079132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25212.862000, 29607.710800, 1283.320037, 270.777608, 0.000000, X, Y) && !ellipse(22261.510000, 28932.350600, 1315.984038, 1315.984038, 0.000000, X, Y) && !ellipse(24077.890000, 29008.664000, 1216.328035, 1216.328035, 0.000000, X, Y) && !ellipse(22940.118958, 29035.272369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22016.357269, 28742.122620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25352.190200, 28771.069200, 273.427208, 273.427208, 0.000000, X, Y) && !ellipse(22477.865560, 28570.092400, 324.185609, 324.185609, 0.000000, X, Y) && !ellipse(23237.150360, 28230.347137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24436.052734, 28311.946808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23608.233185, 28053.827515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20237.458435, 27939.594879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21083.816727, 27753.854340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24417.178500, 27703.338000, 1188.464034, 1188.464034, 0.000000, X, Y) && !ellipse(25270.162048, 27533.760376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21837.961868, 27359.571869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23006.494690, 27180.506073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25946.384735, 27088.565063, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 10:41:31 2013] Writing fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41.gif
[Wed May 22 10:41:45 2013] ../../xmm0136140201/products/events/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41_src.evt and ../../xmm0136140201/products/events/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41_bgd.evt exist, delete to re-create
[Wed May 22 10:41:45 2013] Mean detx,y = (1705.31, 5656.35) 
[Wed May 22 10:41:45 2013] ../../xmm0136140201/products/images/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41_src.img and ../../xmm0136140201/products/images/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41_bgd.img exist, delete to re-create
[Wed May 22 10:41:45 2013] ../../xmm0136140201/products/spectra/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41_src_b10.pi.gz and ../../xmm0136140201/products/spectra/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41_bgd.pi exist, delete to re-create
[Wed May 22 10:41:45 2013] Setting source spectrum file to fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Wed May 22 10:41:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Wed May 22 10:41:45 2013] ../../xmm0136140201/products/lightcurves/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41_src.lc and ../../xmm0136140201/products/lightcurves/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41_bgd.lc exist, delete to re-create
[Wed May 22 10:42:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 10:42:26 2013] rmf not generated due to insufficient counts
[Wed May 22 10:42:26 2013] fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41.arf exists, delete to re-create
[Wed May 22 13:14:34 2013] Updating aperture counts using extracted products
[Wed May 22 13:14:35 2013] Total counts from fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41_src_b10.pi.gz = 2035.00
[Wed May 22 13:14:35 2013] Total counts from fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41_bgd.pi.gz = 2306.00
[Wed May 22 13:14:35 2013] Got source and background scale factors 1334400.000000, 2778579.000000
[Wed May 22 13:14:35 2013] User source parameters:
  Position = (265.4, 345.9) = 18 1 18.54 -25 39 53.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 927.6 +/- 46.1
  Background aperture counts = 1107.4
  Rate = 0.05 +/- 0.003

[Wed May 22 13:14:35 2013] Updating counts from extracted products
[Wed May 22 13:14:35 2013] Set source signif. to 927.55/33.28 = 27.87
[Wed May 22 13:15:12 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:15:12 2013] Using photon index=1.80, rate=0.0505, arf fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41.arf
[Wed May 22 13:15:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:15:12 2013] Updating source flux to 3.4e-13
[Wed May 22 13:15:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 13:16:35 2013] xmm0136140201/analysis//spectral/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete