[Wed May 22 10:37:06 2013] Detection parameters:
  Position = (368.2, 350.1) = 18 0 45.48 -25 39 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 281.6 +/- 25.0
  Background counts = 124.0
  Rate = 0.03 +/- 0.002

[Wed May 22 10:37:17 2013] Off-axis axis estimate = 6.29'
[Wed May 22 10:38:26 2013] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:38:26 2013] Initial guess for spatial extent in simple fitting = 9.57"
[Wed May 22 10:38:26 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.234
[Wed May 22 10:38:26 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 9.57"
[Wed May 22 10:38:28 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src29.ximg exists
[Wed May 22 10:38:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src29.csv
[Wed May 22 10:38:28 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed May 22 10:38:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src29.csv
[Wed May 22 10:38:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:38:30 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed May 22 10:38:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Wed May 22 10:38:30 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed May 22 10:38:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Wed May 22 10:38:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:39:17 2013] Spatial fit model total counts = 1628.950000, observed total counts = 1367.000000
[Wed May 22 10:39:17 2013] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 10:39:17 2013] Spatial fit model total counts = 1939.580000, observed total counts = 1676.000000
[Wed May 22 10:39:17 2013] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 10:39:17 2013] Spatial fit model total counts = 1864.790000, observed total counts = 1870.000000
[Wed May 22 10:39:17 2013] Offset between fit and detection position for source 29 = 1.347812 pixels
[Wed May 22 10:39:17 2013] Warning, changing simple spatial fit ID from 29 to 36
[Wed May 22 10:39:17 2013] 1738.324000 total counts/ 1178.780000 bgd. counts: snr = 16.297383
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.347812 pixels
  Position = (366.9, 349.7) = 18 0 45.90 -25 39 36.6
  Extent = 18.6 (18.5-37.2)", rotation angle = 0
  Source counts = 559.5 +/- 41.7
  Background counts = 1178.8
  Rate = 0.03 +/- 0.002
[Wed May 22 10:39:18 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:39:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:39:18 2013] Assessing source extent using major axis lower bound
[Wed May 22 10:39:18 2013] Source does appear to be extended
[Wed May 22 10:39:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:39:18 2013] Source is confused with source 20
[Wed May 22 10:40:08 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 22 10:40:08 2013] Initial guess for spatial extent in simple fitting = 18.62"
[Wed May 22 10:40:08 2013] source mask rpix=4.3, npix_max = 91, mask sum = 90, frac = 0.984
[Wed May 22 10:40:08 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 18.62"
[Wed May 22 10:40:09 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src25.ximg exists
[Wed May 22 10:40:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src25.csv
[Wed May 22 10:40:09 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src25_1.ximg exists
[Wed May 22 10:40:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src25.csv
[Wed May 22 10:40:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:40:12 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Wed May 22 10:40:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src25.csv
[Wed May 22 10:40:12 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Wed May 22 10:40:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src25.csv
[Wed May 22 10:40:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:40:54 2013] Warning, spatial fit 25 centroid is now closest to src. 69
[Wed May 22 10:40:54 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:40:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:40:54 2013] Assessing source extent using major axis lower bound
[Wed May 22 10:40:54 2013] Source does appear to be extended
[Wed May 22 10:40:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:41:31 2013] XMMSAS src. selection expression = ellipse(31870.822000, 30377.927200, 1117.362032, 1117.362032, 0.000000, X, Y)
[Wed May 22 10:41:31 2013] Not overwriting source region fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29_src.reg
[Wed May 22 10:41:31 2013] Extracting stamp from image fullrun_pn_xmm0136140201_pi300-10000_cl_sm2.00.img.gz, (303, 286) - (431, 414)
[Wed May 22 10:41:31 2013] XMMSAS bgd. selection expression = annulus(31870.822000, 30377.927200, 1862.270054, 3724.540107, X, Y) && !ellipse(33470.132416, 31288.285095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35004.374000, 31390.165600, 1001.752029, 1001.752029, 0.000000, X, Y) && !ellipse(34360.190000, 30802.550000, 1842.184053, 680.857337, 348.639000, X, Y) && !ellipse(32853.260000, 30843.840000, 3364.128097, 3364.128097, 0.000000, X, Y) && !ellipse(33875.194000, 30515.756000, 1682.064048, 1682.064048, 0.000000, X, Y) && !ellipse(34951.925507, 30131.475555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31365.010000, 30135.189200, 350.398410, 350.398410, 0.000000, X, Y) && !ellipse(35919.856000, 30068.520000, 455.904813, 455.904813, 0.000000, X, Y) && !ellipse(30580.126800, 29836.647400, 1449.640042, 1449.640042, 0.000000, X, Y) && !ellipse(32979.984802, 30144.878143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32001.874664, 29683.707520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30484.946000, 29835.666000, 1336.280038, 638.867218, -0.000000, X, Y) && !ellipse(28380.836853, 29575.998291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29621.797546, 29399.967194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34160.272766, 29446.727570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31264.635040, 29293.967600, 547.760816, 547.760816, 0.000000, X, Y) && !ellipse(29274.132000, 29292.265400, 1367.712039, 173.755205, 342.828000, X, Y) && !ellipse(36380.033905, 29449.441010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33621.778848, 29144.313000, 415.948012, 415.948012, 0.000000, X, Y) && !ellipse(30725.071075, 29117.421631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28059.426971, 29000.369354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30038.525635, 28916.879303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34571.520000, 28944.148000, 341.905610, 341.905610, 0.000000, X, Y) && !ellipse(33204.552000, 28870.486000, 578.759217, 578.759217, 0.000000, X, Y) && !ellipse(35117.334000, 29138.011600, 1641.408047, 1641.408047, 0.000000, X, Y) && !ellipse(31840.796000, 28206.187200, 1423.808041, 1423.808041, 0.000000, X, Y) && !ellipse(31468.426178, 27992.116669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30367.188000, 27653.673400, 1383.040040, 1383.040040, 0.000000, X, Y) && !ellipse(33782.073800, 28351.686400, 492.064014, 492.064014, 0.000000, X, Y) && !ellipse(33178.241150, 27963.630859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28803.759125, 27467.602356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29629.701569, 27367.714844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31827.534821, 27272.062103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28068.886841, 27332.410919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30663.108002, 26886.381927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30261.813599, 26778.603668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28240.521210, 26392.182739, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 10:41:31 2013] Writing fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29.gif
[Wed May 22 10:41:43 2013] ../../xmm0136140201/products/events/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0136140201/products/events/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Wed May 22 10:41:43 2013] Mean detx,y = (-7080.68, 5672.48) 
[Wed May 22 10:41:43 2013] ../../xmm0136140201/products/images/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29_src.img and ../../xmm0136140201/products/images/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Wed May 22 10:41:43 2013] ../../xmm0136140201/products/spectra/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0136140201/products/spectra/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Wed May 22 10:41:43 2013] Setting source spectrum file to fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed May 22 10:41:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed May 22 10:41:43 2013] ../../xmm0136140201/products/lightcurves/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0136140201/products/lightcurves/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Wed May 22 10:42:26 2013] fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29.rmf exists, delete to re-create
[Wed May 22 10:42:26 2013] fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29.arf exists, delete to re-create
[Wed May 22 13:14:31 2013] Updating aperture counts using extracted products
[Wed May 22 13:14:31 2013] Total counts from fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 3051.00
[Wed May 22 13:14:31 2013] Total counts from fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29_bgd.pi.gz = 1158.00
[Wed May 22 13:14:31 2013] Got source and background scale factors 3374152.000000, 1912305.000000
[Wed May 22 13:14:31 2013] User source parameters:
  Position = (366.9, 349.7) = 18 0 45.90 -25 39 36.6
  Extent = 18.6 (18.5-37.2)", rotation angle = 0
  Source aperture counts = 1007.8 +/- 56.2
  Background aperture counts = 2043.2
  Rate = 0.05 +/- 0.003

[Wed May 22 13:15:11 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:15:11 2013] Using photon index=1.80, rate=0.0305, arf fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29.arf
[Wed May 22 13:15:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:15:11 2013] Updating source flux to 2.9e-13
[Wed May 22 13:15:57 2013] Flag p found in src. 29 procflags, skipping spectral fitting
[Wed May 22 13:15:57 2013] Flag c found in src. 29 procflags, skipping spectral fitting
[Wed May 22 13:16:35 2013] xmm0136140201/analysis//spectral/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete