[Wed May 22 10:37:05 2013] Detection parameters:
  Position = (184.5, 201.9) = 18 1 44.64 -25 50 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.2 +/- 18.4
  Background counts = 67.0
  Rate = 0.02 +/- 0.002

[Wed May 22 10:37:17 2013] Off-axis axis estimate = 10.83'
[Wed May 22 10:38:26 2013] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:38:26 2013] Initial guess for spatial extent in simple fitting = 11.84"
[Wed May 22 10:38:26 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.011
[Wed May 22 10:38:26 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 11.84"
[Wed May 22 10:38:27 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src13.ximg exists
[Wed May 22 10:38:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src13.csv
[Wed May 22 10:38:27 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed May 22 10:38:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src13.csv
[Wed May 22 10:38:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:38:30 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed May 22 10:38:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed May 22 10:38:30 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed May 22 10:38:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed May 22 10:38:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:39:17 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.893532 pixels away
[Wed May 22 10:39:18 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:39:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:39:18 2013] Assessing source extent using major
[Wed May 22 10:39:18 2013] Source does appear to be extended
[Wed May 22 10:39:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:40:08 2013] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:40:08 2013] Initial guess for spatial extent in simple fitting = 11.84"
[Wed May 22 10:40:08 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.011
[Wed May 22 10:40:08 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 11.84"
[Wed May 22 10:40:09 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src12.ximg exists
[Wed May 22 10:40:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src12.csv
[Wed May 22 10:40:09 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed May 22 10:40:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src12.csv
[Wed May 22 10:40:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:40:12 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed May 22 10:40:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Wed May 22 10:40:12 2013] fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed May 22 10:40:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Wed May 22 10:40:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:40:54 2013] Source 13 is offset by 1.614053 and -3.350504 pixels which is larger than
2 X fitted extent = 10.890989 x 1.367376, not incorporating fit results
[Wed May 22 10:40:54 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:40:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:40:54 2013] Assessing source extent using major
[Wed May 22 10:40:54 2013] Source does appear to be extended
[Wed May 22 10:40:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:41:30 2013] XMMSAS src. selection expression = ellipse(15999.431641, 17513.718307, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 10:41:30 2013] Not overwriting source region fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13_src.reg
[Wed May 22 10:41:30 2013] Extracting stamp from image fullrun_pn_xmm0136140201_pi300-10000_cl_sm2.00.img.gz, (147, 164) - (222, 239)
[Wed May 22 10:41:30 2013] XMMSAS bgd. selection expression = annulus(15999.431641, 17513.718307, 1087.500000, 2175.000000, X, Y)
[Wed May 22 10:41:30 2013] Writing fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13.gif
[Wed May 22 10:41:41 2013] ../../xmm0136140201/products/events/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0136140201/products/events/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Wed May 22 10:41:42 2013] Mean detx,y = (9139.18, -6666.05) 
[Wed May 22 10:41:42 2013] ../../xmm0136140201/products/images/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13_src.img and ../../xmm0136140201/products/images/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Wed May 22 10:41:42 2013] ../../xmm0136140201/products/spectra/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0136140201/products/spectra/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Wed May 22 10:41:42 2013] Setting source spectrum file to fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed May 22 10:41:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed May 22 10:41:42 2013] ../../xmm0136140201/products/lightcurves/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0136140201/products/lightcurves/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Wed May 22 10:42:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 10:42:26 2013] rmf not generated due to insufficient counts
[Wed May 22 10:42:26 2013] fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13.arf exists, delete to re-create
[Wed May 22 13:14:25 2013] Updating aperture counts using extracted products
[Wed May 22 13:14:25 2013] Total counts from fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 416.00
[Wed May 22 13:14:26 2013] Total counts from fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13_bgd.pi.gz = 2955.00
[Wed May 22 13:14:26 2013] Got source and background scale factors 1116184.000000, 10436538.000000
[Wed May 22 13:14:26 2013] User source parameters:
  Position = (184.5, 201.9) = 18 1 44.64 -25 50 19.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 100.0 +/- 21.4
  Background aperture counts = 316.0
  Rate = 0.005 +/- 0.001

[Wed May 22 13:14:26 2013] Updating counts from extracted products
[Wed May 22 13:14:26 2013] Set source signif. to 99.96/17.78 = 5.62
[Wed May 22 13:15:11 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:15:11 2013] Using photon index=1.80, rate=0.00544, arf fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13.arf
[Wed May 22 13:15:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:15:11 2013] Updating source flux to 5.5e-14
[Wed May 22 13:15:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 13:16:35 2013] xmm0136140201/analysis//spectral/fullrun_pn_xmm0136140201_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete