[Wed May 22 10:37:26 2013] Detection parameters:
  Position = (325.2, 463.0) = 18 0 59.31 -25 31 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.2 +/- 15.6
  Background counts = 17.9
  Rate = 0.006 +/- 0.0007

[Wed May 22 10:37:29 2013] Off-axis axis estimate = 12.09'
[Wed May 22 10:38:39 2013] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:38:39 2013] Initial guess for spatial extent in simple fitting = 12.47"
[Wed May 22 10:38:39 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.926
[Wed May 22 10:38:39 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 12.47"
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src20.ximg exists
[Wed May 22 10:38:40 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src20.csv
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed May 22 10:38:40 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src20.csv
[Wed May 22 10:38:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed May 22 10:38:40 2013] Fit fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Wed May 22 10:39:48 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 16.189257 pixels away
[Wed May 22 10:39:48 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:39:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:39:48 2013] Assessing source extent using major
[Wed May 22 10:39:48 2013] Source does appear to be extended
[Wed May 22 10:39:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:40:20 2013] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:40:20 2013] Initial guess for spatial extent in simple fitting = 12.47"
[Wed May 22 10:40:20 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.926
[Wed May 22 10:40:20 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 12.47"
[Wed May 22 10:40:21 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src18.ximg exists
[Wed May 22 10:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src18.csv
[Wed May 22 10:40:21 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed May 22 10:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src18.csv
[Wed May 22 10:40:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:40:21 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed May 22 10:40:21 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed May 22 10:40:21 2013] Fit fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Wed May 22 10:41:07 2013] Spatial fit model total counts = 358.613000, observed total counts = 356.000000
[Wed May 22 10:41:07 2013] Offset between fit and detection position for source 8 = 0.892347 pixels
[Wed May 22 10:41:07 2013] 354.745000 total counts/ 242.667000 bgd. counts: snr = 7.194738
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.892347 pixels
  Position = (324.4, 462.7) = 18 0 59.58 -25 31 25.0
  Extent = 8.2 (5.8-10.6)", rotation angle = 0
  Source counts = 112.1 +/- 18.8
  Background counts = 242.7
  Rate = 0.005 +/- 0.0009
[Wed May 22 10:41:07 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:41:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:41:07 2013] Assessing source extent using major axis lower bound
[Wed May 22 10:41:07 2013] Source does appear to be extended
[Wed May 22 10:41:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 13:13:32 2013] XMMSAS src. selection expression = ellipse(28172.332160, 40210.449200, 491.585414, 491.585414, 0.000000, X, Y)
[Wed May 22 13:13:32 2013] Not overwriting source region fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8_src.reg
[Wed May 22 13:13:32 2013] Extracting stamp from image fullrun_mos2_xmm0136140201_pi300-10000_cl_sm2.00.img.gz, (296, 434) - (353, 491)
[Wed May 22 13:13:32 2013] XMMSAS bgd. selection expression = annulus(28172.332160, 40210.449200, 819.309024, 1638.618047, X, Y) && !ellipse(28145.163177, 41285.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29618.314148, 41032.444397, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 13:13:32 2013] Writing fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8.gif
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/events/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0136140201/products/events/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Wed May 22 13:13:33 2013] Mean detx,y = (3658.57, -15864.63) 
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/images/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8_src.img and ../../xmm0136140201/products/images/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/spectra/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0136140201/products/spectra/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Wed May 22 13:13:33 2013] Setting source spectrum file to fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May 22 13:13:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/lightcurves/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0136140201/products/lightcurves/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Wed May 22 13:13:37 2013] fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8.rmf exists, delete to re-create
[Wed May 22 13:13:37 2013] fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8.arf exists, delete to re-create
[Wed May 22 13:15:27 2013] Updating aperture counts using extracted products
[Wed May 22 13:15:27 2013] Total counts from fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 197.00
[Wed May 22 13:15:27 2013] Total counts from fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8_bgd.pi.gz = 391.00
[Wed May 22 13:15:27 2013] Got source and background scale factors 766400.000000, 3687632.000000
[Wed May 22 13:15:27 2013] User source parameters:
  Position = (324.4, 462.7) = 18 0 59.58 -25 31 25.0
  Extent = 8.2 (5.8-10.6)", rotation angle = 0
  Source aperture counts = 115.7 +/- 15.1
  Background aperture counts = 81.3
  Rate = 0.005 +/- 0.0007

[Wed May 22 13:15:28 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:15:28 2013] Using photon index=1.80, rate=0.00519, arf fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8.arf
[Wed May 22 13:15:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:15:28 2013] Updating source flux to 2.5e-13
[Wed May 22 13:15:57 2013] xmm0136140201/analysis//spectral/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete