[Wed May 22 10:37:26 2013] Detection parameters:
  Position = (225.4, 474.8) = 18 1 31.40 -25 30 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.8 +/- 17.5
  Background counts = 17.1
  Rate = 0.008 +/- 0.0008

[Wed May 22 10:37:29 2013] Off-axis axis estimate = 13.84'
[Wed May 22 10:38:39 2013] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:38:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 10:38:39 2013] Initial guess for spatial extent in simple fitting = 13.35"
[Wed May 22 10:38:39 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.962
[Wed May 22 10:38:39 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 13.35"
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src14.ximg exists
[Wed May 22 10:38:40 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src14.csv
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed May 22 10:38:40 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src14.csv
[Wed May 22 10:38:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed May 22 10:38:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed May 22 10:38:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed May 22 10:38:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:39:48 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.900940 pixels away
[Wed May 22 10:39:48 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:39:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:39:48 2013] Assessing source extent using major
[Wed May 22 10:39:48 2013] Source does appear to be extended
[Wed May 22 10:39:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:40:20 2013] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:40:20 2013] Initial guess for spatial extent in simple fitting = 13.35"
[Wed May 22 10:40:20 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.962
[Wed May 22 10:40:20 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 13.35"
[Wed May 22 10:40:21 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src14.ximg exists
[Wed May 22 10:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src14.csv
[Wed May 22 10:40:21 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed May 22 10:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src14.csv
[Wed May 22 10:40:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:40:21 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed May 22 10:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed May 22 10:40:21 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed May 22 10:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed May 22 10:40:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:41:07 2013] Warning, spatial fit 14 centroid is now closest to src. 7
[Wed May 22 10:41:07 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:41:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:41:07 2013] Assessing source extent using major
[Wed May 22 10:41:07 2013] Source does appear to be extended
[Wed May 22 10:41:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 13:13:32 2013] XMMSAS src. selection expression = ellipse(19557.615616, 41256.459839, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 13:13:32 2013] Not overwriting source region fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4_src.reg
[Wed May 22 13:13:32 2013] Extracting stamp from image fullrun_mos2_xmm0136140201_pi300-10000_cl_sm2.00.img.gz, (188, 437) - (263, 512)
[Wed May 22 13:13:32 2013] XMMSAS bgd. selection expression = annulus(19557.615616, 41256.459839, 1087.500000, 2175.000000, X, Y) && !ellipse(21673.640778, 41336.100098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21306.886000, 40154.049400, 929.448027, 929.448027, 0.000000, X, Y)
[Wed May 22 13:13:32 2013] Writing fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4.gif
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/events/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0136140201/products/events/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Wed May 22 13:13:33 2013] Mean detx,y = (-4818.69, -16975.57) 
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/images/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4_src.img and ../../xmm0136140201/products/images/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/spectra/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0136140201/products/spectra/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Wed May 22 13:13:33 2013] Setting source spectrum file to fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 22 13:13:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/lightcurves/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0136140201/products/lightcurves/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Wed May 22 13:13:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 13:13:37 2013] rmf not generated due to insufficient counts
[Wed May 22 13:13:37 2013] fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Wed May 22 13:15:26 2013] Updating aperture counts using extracted products
[Wed May 22 13:15:26 2013] Total counts from fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 305.00
[Wed May 22 13:15:26 2013] Total counts from fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 307.00
[Wed May 22 13:15:26 2013] Got source and background scale factors 957908.000000, 2529920.000000
[Wed May 22 13:15:26 2013] User source parameters:
  Position = (225.4, 474.8) = 18 1 31.40 -25 30 31.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 188.8 +/- 18.5
  Background aperture counts = 116.2
  Rate = 0.009 +/- 0.0009

[Wed May 22 13:15:26 2013] Updating counts from extracted products
[Wed May 22 13:15:26 2013] Set source signif. to 188.76/10.78 = 17.51
[Wed May 22 13:15:28 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:15:28 2013] Using photon index=1.80, rate=0.00875, arf fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4.arf
[Wed May 22 13:15:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:15:28 2013] Updating source flux to 4.8e-13
[Wed May 22 13:15:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 13:15:57 2013] xmm0136140201/analysis//spectral/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete