[Wed May 22 10:37:26 2013] Detection parameters:
  Position = (341.0, 472.2) = 18 0 54.24 -25 30 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.1 +/- 15.6
  Background counts = 15.5
  Rate = 0.007 +/- 0.0007

[Wed May 22 10:37:29 2013] Off-axis axis estimate = 12.97'
[Wed May 22 10:38:39 2013] Using EEF radius (= 12.91 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:38:39 2013] Initial guess for spatial extent in simple fitting = 12.91"
[Wed May 22 10:38:39 2013] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.873
[Wed May 22 10:38:39 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 12.91"
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src17.ximg exists
[Wed May 22 10:38:40 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src17.csv
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed May 22 10:38:40 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src17.csv
[Wed May 22 10:38:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed May 22 10:38:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed May 22 10:38:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed May 22 10:38:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:39:48 2013] Warning, spatial fit 17 centroid is now closest to src. 2
[Wed May 22 10:39:48 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:39:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:39:48 2013] Assessing source extent using major
[Wed May 22 10:39:48 2013] Source does appear to be extended
[Wed May 22 10:39:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:40:20 2013] Using EEF radius (= 12.91 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:40:20 2013] Initial guess for spatial extent in simple fitting = 12.91"
[Wed May 22 10:40:20 2013] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.873
[Wed May 22 10:40:20 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 12.91"
[Wed May 22 10:40:21 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src16.ximg exists
[Wed May 22 10:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src16.csv
[Wed May 22 10:40:21 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src16_1.ximg exists
[Wed May 22 10:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src16.csv
[Wed May 22 10:40:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:40:21 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Wed May 22 10:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed May 22 10:40:21 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Wed May 22 10:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed May 22 10:40:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:41:07 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.379143 pixels away
[Wed May 22 10:41:07 2013] Spatial fit model total counts = 332.282000, observed total counts = 287.000000
[Wed May 22 10:41:07 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 10:41:07 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:41:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:41:07 2013] Assessing source extent using major
[Wed May 22 10:41:07 2013] Source does appear to be extended
[Wed May 22 10:41:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 13:13:32 2013] XMMSAS src. selection expression = ellipse(29618.314148, 41032.444397, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 13:13:32 2013] Not overwriting source region fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3_src.reg
[Wed May 22 13:13:32 2013] Extracting stamp from image fullrun_mos2_xmm0136140201_pi300-10000_cl_sm2.00.img.gz, (303, 435) - (378, 510)
[Wed May 22 13:13:32 2013] XMMSAS bgd. selection expression = annulus(29618.314148, 41032.444397, 1087.500000, 2175.000000, X, Y) && !ellipse(28145.163177, 41285.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28172.332160, 40210.449200, 655.447219, 655.447219, 0.000000, X, Y)
[Wed May 22 13:13:32 2013] Writing fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3.gif
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/events/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0136140201/products/events/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed May 22 13:13:33 2013] Mean detx,y = (5092.93, -16691.77) 
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/images/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3_src.img and ../../xmm0136140201/products/images/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/spectra/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0136140201/products/spectra/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed May 22 13:13:33 2013] Setting source spectrum file to fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 22 13:13:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/lightcurves/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0136140201/products/lightcurves/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed May 22 13:13:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 13:13:37 2013] rmf not generated due to insufficient counts
[Wed May 22 13:13:37 2013] fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Wed May 22 13:15:26 2013] Updating aperture counts using extracted products
[Wed May 22 13:15:26 2013] Total counts from fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 226.00
[Wed May 22 13:15:27 2013] Total counts from fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 296.00
[Wed May 22 13:15:27 2013] Got source and background scale factors 1122284.000000, 3030580.000000
[Wed May 22 13:15:27 2013] User source parameters:
  Position = (341.0, 472.2) = 18 0 54.24 -25 30 43.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 116.4 +/- 16.1
  Background aperture counts = 109.6
  Rate = 0.005 +/- 0.0007

[Wed May 22 13:15:27 2013] Updating counts from extracted products
[Wed May 22 13:15:27 2013] Set source signif. to 116.39/10.47 = 11.12
[Wed May 22 13:15:28 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:15:28 2013] Using photon index=1.80, rate=0.00539, arf fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3.arf
[Wed May 22 13:15:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:15:28 2013] Updating source flux to 3.1e-13
[Wed May 22 13:15:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 13:15:57 2013] xmm0136140201/analysis//spectral/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete