[Wed May 22 10:37:27 2013] Detection parameters:
  Position = (417.2, 344.0) = 18 0 29.70 -25 40 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.5 +/- 21.7
  Background counts = 22.4
  Rate = 0.01 +/- 0.001

[Wed May 22 10:37:29 2013] Off-axis axis estimate = 9.22'
[Wed May 22 10:38:39 2013] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:38:39 2013] Initial guess for spatial extent in simple fitting = 11.04"
[Wed May 22 10:38:39 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.975
[Wed May 22 10:38:39 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 11.04"
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src5.ximg exists
[Wed May 22 10:38:40 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src5.csv
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May 22 10:38:40 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src5.csv
[Wed May 22 10:38:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May 22 10:38:40 2013] Fit fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed May 22 10:39:48 2013] Warning, spatial fit 5 centroid is now closest to src. 20
[Wed May 22 10:39:48 2013] Source 18 is offset by -2.640946 and -3.837357 pixels which is larger than
2 X fitted extent = 1.232303 x 1.232303, not incorporating fit results
[Wed May 22 10:39:48 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:39:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:39:48 2013] Assessing source extent using major
[Wed May 22 10:39:48 2013] Source does appear to be extended
[Wed May 22 10:39:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:39:48 2013] Source is confused with source 20
[Wed May 22 10:40:20 2013] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:40:20 2013] Initial guess for spatial extent in simple fitting = 11.04"
[Wed May 22 10:40:20 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.975
[Wed May 22 10:40:20 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 11.04"
[Wed May 22 10:40:20 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src5.ximg exists
[Wed May 22 10:40:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src5.csv
[Wed May 22 10:40:20 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed May 22 10:40:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src5.csv
[Wed May 22 10:40:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:40:21 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed May 22 10:40:21 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May 22 10:40:21 2013] Fit fullrun_mos2_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed May 22 10:41:07 2013] Warning, spatial fit 5 centroid is now closest to src. 20
[Wed May 22 10:41:07 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 20.007666 pixels away
[Wed May 22 10:41:07 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:41:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:41:07 2013] Assessing source extent using major
[Wed May 22 10:41:07 2013] Source does appear to be extended
[Wed May 22 10:41:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 13:13:32 2013] XMMSAS src. selection expression = ellipse(36249.419739, 29881.331970, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 13:13:32 2013] Not overwriting source region fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18_src.reg
[Wed May 22 13:13:32 2013] Extracting stamp from image fullrun_mos2_xmm0136140201_pi300-10000_cl_sm2.00.img.gz, (380, 307) - (455, 382)
[Wed May 22 13:13:32 2013] XMMSAS bgd. selection expression = annulus(36249.419739, 29881.331970, 1087.500000, 2175.000000, X, Y) && !ellipse(32617.872000, 29231.558000, 1562.168045, 1562.168045, 0.000000, X, Y) && !ellipse(35536.631800, 29164.493600, 1195.072034, 263.392008, 317.968000, X, Y) && !ellipse(35200.967255, 31695.715271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35866.814000, 29666.028000, 1391.352040, 1391.352040, 0.000000, X, Y)
[Wed May 22 13:13:32 2013] Writing fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18.gif
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/events/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0136140201/products/events/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Wed May 22 13:13:33 2013] Mean detx,y = (11454.42, -5379.82) 
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/images/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18_src.img and ../../xmm0136140201/products/images/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/spectra/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0136140201/products/spectra/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Wed May 22 13:13:33 2013] Setting source spectrum file to fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed May 22 13:13:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed May 22 13:13:33 2013] ../../xmm0136140201/products/lightcurves/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0136140201/products/lightcurves/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Wed May 22 13:13:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 13:13:37 2013] rmf not generated due to insufficient counts
[Wed May 22 13:13:37 2013] fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Wed May 22 13:15:24 2013] Updating aperture counts using extracted products
[Wed May 22 13:15:24 2013] Total counts from fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 592.00
[Wed May 22 13:15:24 2013] Total counts from fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18_bgd.pi.gz = 702.00
[Wed May 22 13:15:24 2013] Got source and background scale factors 1337600.000000, 6918870.000000
[Wed May 22 13:15:24 2013] User source parameters:
  Position = (417.2, 344.0) = 18 0 29.70 -25 40 1.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 456.3 +/- 25.3
  Background aperture counts = 135.7
  Rate = 0.02 +/- 0.001

[Wed May 22 13:15:24 2013] Updating counts from extracted products
[Wed May 22 13:15:24 2013] Set source signif. to 456.28/11.65 = 39.17
[Wed May 22 13:15:28 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:15:28 2013] Using photon index=1.80, rate=0.0211, arf fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18.arf
[Wed May 22 13:15:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:15:28 2013] Updating source flux to 7.6e-13
[Wed May 22 13:15:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 13:15:57 2013] xmm0136140201/analysis//spectral/fullrun_mos2_xmm0136140201_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete