[Wed May 22 10:37:27 2013] Detection parameters:
  Position = (449.8, 358.1) = 18 0 19.22 -25 38 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.6 +/- 8.4
  Background counts = 16.8
  Rate = 0.002 +/- 0.0004

[Wed May 22 10:37:29 2013] Off-axis axis estimate = 11.80'
[Wed May 22 10:38:39 2013] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:38:39 2013] Initial guess for spatial extent in simple fitting = 12.33"
[Wed May 22 10:38:39 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.945
[Wed May 22 10:38:39 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 12.33"
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src35.ximg exists
[Wed May 22 10:38:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src35.csv
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed May 22 10:38:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src35.csv
[Wed May 22 10:38:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:38:41 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed May 22 10:38:41 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src35.csv
[Wed May 22 10:38:41 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed May 22 10:38:41 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src35.csv
[Wed May 22 10:38:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:39:48 2013] Warning, spatial fit 12 centroid is now closest to src. 23
[Wed May 22 10:39:48 2013] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 14.265237 pixels away
[Wed May 22 10:39:48 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:39:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:39:48 2013] Assessing source extent using major
[Wed May 22 10:39:48 2013] Source does appear to be extended
[Wed May 22 10:39:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:39:48 2013] Deleting source due to low Poisson probability 0.7