[Wed May 22 10:37:27 2013] Detection parameters:
  Position = (300.2, 361.4) = 18 1 7.36 -25 38 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.4 +/- 11.2
  Background counts = 49.5
  Rate = 0.004 +/- 0.0009

[Wed May 22 10:37:29 2013] Off-axis axis estimate = 4.57'
[Wed May 22 10:38:39 2013] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:38:39 2013] Initial guess for spatial extent in simple fitting = 8.71"
[Wed May 22 10:38:39 2013] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.798
[Wed May 22 10:38:39 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 8.71"
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src28.ximg exists
[Wed May 22 10:38:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src28.csv
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed May 22 10:38:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src28.csv
[Wed May 22 10:38:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed May 22 10:38:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed May 22 10:38:40 2013] fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed May 22 10:38:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed May 22 10:38:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:39:48 2013] Spatial fit model total counts = 635.684000, observed total counts = 413.000000
[Wed May 22 10:39:48 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 10:39:48 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:39:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:39:48 2013] Assessing source extent using major
[Wed May 22 10:39:48 2013] Source does appear to be extended
[Wed May 22 10:39:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:39:48 2013] Deleting source due to low Poisson probability 0.8