[Wed May 22 10:37:21 2013] Detection parameters:
  Position = (445.9, 365.0) = 18 0 20.49 -25 38 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 189.5 +/- 18.7
  Background counts = 17.0
  Rate = 0.009 +/- 0.0009

[Wed May 22 10:37:25 2013] Off-axis axis estimate = 11.73'
[Wed May 22 10:38:33 2013] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:38:33 2013] Initial guess for spatial extent in simple fitting = 12.29"
[Wed May 22 10:38:33 2013] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.814
[Wed May 22 10:38:33 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 12.29"
[Wed May 22 10:38:34 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_src12.ximg exists
[Wed May 22 10:38:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_src12.csv
[Wed May 22 10:38:34 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed May 22 10:38:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_src12.csv
[Wed May 22 10:38:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:38:37 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed May 22 10:38:37 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed May 22 10:38:37 2013] Fit fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed May 22 10:39:38 2013] Spatial fit model total counts = 612.336000, observed total counts = 604.000000
[Wed May 22 10:39:38 2013] Offset between fit and detection position for source 31 = 1.152040 pixels
[Wed May 22 10:39:38 2013] 516.619000 total counts/ 371.019000 bgd. counts: snr = 7.558982
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.152040 pixels
  Position = (445.5, 366.1) = 18 0 20.60 -25 38 25.1
  Extent = 6.8 (5.7-8.0)", rotation angle = 0
  Source counts = 145.6 +/- 22.7
  Background counts = 371.0
  Rate = 0.007 +/- 0.001
[Wed May 22 10:39:39 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:39:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:39:39 2013] Assessing source extent using major axis lower bound
[Wed May 22 10:39:39 2013] Source does appear to be extended
[Wed May 22 10:39:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:40:17 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 22 10:40:17 2013] Initial guess for spatial extent in simple fitting = 6.84"
[Wed May 22 10:40:17 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.165
[Wed May 22 10:40:17 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 6.84"
[Wed May 22 10:40:19 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_src11.ximg exists
[Wed May 22 10:40:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_src11.csv
[Wed May 22 10:40:19 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed May 22 10:40:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_src11.csv
[Wed May 22 10:40:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:40:19 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed May 22 10:40:19 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed May 22 10:40:19 2013] Fit fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed May 22 10:41:01 2013] Warning, spatial fit 11 centroid is now closest to src. 46
[Wed May 22 10:41:01 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:41:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:41:01 2013] Assessing source extent using major axis lower bound
[Wed May 22 10:41:01 2013] Source does appear to be extended
[Wed May 22 10:41:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:42:27 2013] XMMSAS src. selection expression = ellipse(38712.959220, 31800.116200, 410.274012, 410.274012, 0.000000, X, Y)
[Wed May 22 10:42:27 2013] Not overwriting source region fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src31_src.reg
[Wed May 22 10:42:27 2013] Extracting stamp from image fullrun_mos1_xmm0136140201_pi300-10000_cl_sm2.00.img.gz, (422, 342) - (469, 390)
[Wed May 22 10:42:27 2013] XMMSAS bgd. selection expression = annulus(38712.959220, 31800.116200, 683.790020, 1367.580039, X, Y) && !ellipse(38390.528000, 31283.558000, 443.168813, 443.168813, 0.000000, X, Y)
[Wed May 22 10:42:27 2013] Writing fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src31.gif
[Wed May 22 10:45:52 2013] Mean detx,y = (-6971.51, -14273.17) 
[Wed May 22 10:45:55 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 10:46:03 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 10:46:03 2013] Setting source spectrum file to fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed May 22 10:46:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed May 22 13:15:18 2013] Updating aperture counts using extracted products
[Wed May 22 13:15:18 2013] Total counts from fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 237.00
[Wed May 22 13:15:18 2013] Total counts from fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src31_bgd.pi.gz = 522.00
[Wed May 22 13:15:18 2013] Got source and background scale factors 529600.000000, 4044792.000000
[Wed May 22 13:15:18 2013] User source parameters:
  Position = (445.5, 366.1) = 18 0 20.60 -25 38 25.1
  Extent = 6.8 (5.7-8.0)", rotation angle = 0
  Source aperture counts = 168.7 +/- 16.4
  Background aperture counts = 68.3
  Rate = 0.008 +/- 0.0008

[Wed May 22 13:15:22 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:15:22 2013] Using photon index=1.80, rate=0.00675, arf fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src31.arf
[Wed May 22 13:15:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:15:22 2013] Updating source flux to 3.8e-13
[Wed May 22 13:15:43 2013] xmm0136140201/analysis//spectral/fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete