[Wed May 22 10:37:20 2013] Detection parameters:
  Position = (197.5, 387.0) = 18 1 40.39 -25 36 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.3 +/- 16.6
  Background counts = 23.8
  Rate = 0.01 +/- 0.001

[Wed May 22 10:37:25 2013] Off-axis axis estimate = 9.74'
[Wed May 22 10:38:33 2013] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:38:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 10:38:33 2013] Initial guess for spatial extent in simple fitting = 11.30"
[Wed May 22 10:38:33 2013] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.095
[Wed May 22 10:38:33 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 11.30"
[Wed May 22 10:38:34 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_src2.ximg exists
[Wed May 22 10:38:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_src2.csv
[Wed May 22 10:38:34 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May 22 10:38:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_src2.csv
[Wed May 22 10:38:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:38:37 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May 22 10:38:37 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 22 10:38:37 2013] Fit fullrun_mos1_xmm0136140201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed May 22 10:39:38 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 13.160623 pixels away
[Wed May 22 10:39:39 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:39:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:39:39 2013] Assessing source extent using major
[Wed May 22 10:39:39 2013] Source does appear to be extended
[Wed May 22 10:39:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:39:39 2013] Source is confused with source 18
[Wed May 22 10:40:17 2013] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:40:17 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 10:40:17 2013] Initial guess for spatial extent in simple fitting = 11.30"
[Wed May 22 10:40:17 2013] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.095
[Wed May 22 10:40:17 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 11.30"
[Wed May 22 10:40:18 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_src2.ximg exists
[Wed May 22 10:40:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_src2.csv
[Wed May 22 10:40:18 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May 22 10:40:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_src2.csv
[Wed May 22 10:40:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:40:19 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May 22 10:40:19 2013] fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May 22 10:40:19 2013] Fit fullrun_mos1_xmm0136140201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed May 22 10:41:01 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 13.765042 pixels away
[Wed May 22 10:41:01 2013] Source 23 is offset by -4.862088 and 1.780612 pixels which is larger than
2 X fitted extent = 1.331692 x 1.331692, not incorporating fit results
[Wed May 22 10:41:01 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:41:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:41:01 2013] Assessing source extent using major
[Wed May 22 10:41:01 2013] Source does appear to be extended
[Wed May 22 10:41:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:42:27 2013] XMMSAS src. selection expression = ellipse(17131.784378, 33622.353210, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 10:42:27 2013] Not overwriting source region fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src23_src.reg
[Wed May 22 10:42:27 2013] Extracting stamp from image fullrun_mos1_xmm0136140201_pi300-10000_cl_sm2.00.img.gz, (160, 350) - (235, 425)
[Wed May 22 10:42:27 2013] XMMSAS bgd. selection expression = annulus(17131.784378, 33622.353210, 1087.500000, 2175.000000, X, Y) && !ellipse(19447.919098, 32081.870697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16732.927292, 33943.510864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15517.598251, 30751.342590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14832.329800, 35957.589380, 639.358418, 639.358418, 0.000000, X, Y) && !ellipse(14504.593063, 34575.344116, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 10:42:27 2013] Writing fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src23.gif
[Wed May 22 10:42:28 2013] ../../xmm0136140201/products/events/fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0136140201/products/events/fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Wed May 22 10:42:28 2013] Mean detx,y = (-9298.96, 7255.03) 
[Wed May 22 10:42:28 2013] ../../xmm0136140201/products/images/fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src23_src.img and ../../xmm0136140201/products/images/fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Wed May 22 10:42:29 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 10:42:49 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 10:42:49 2013] Setting source spectrum file to fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed May 22 10:42:49 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed May 22 12:51:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 12:51:04 2013] rmf not generated due to insufficient counts
[Wed May 22 13:15:16 2013] Updating aperture counts using extracted products
[Wed May 22 13:15:16 2013] Total counts from fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 413.00
[Wed May 22 13:15:16 2013] Total counts from fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src23_bgd.pi.gz = 1491.00
[Wed May 22 13:15:16 2013] Got source and background scale factors 1327960.000000, 9821358.000000
[Wed May 22 13:15:16 2013] User source parameters:
  Position = (197.5, 387.0) = 18 1 40.39 -25 36 54.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 211.4 +/- 21.3
  Background aperture counts = 201.6
  Rate = 0.01 +/- 0.001

[Wed May 22 13:15:16 2013] Updating counts from extracted products
[Wed May 22 13:15:16 2013] Set source signif. to 211.40/14.20 = 14.89
[Wed May 22 13:15:22 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 13:15:22 2013] Using photon index=1.80, rate=0.0098, arf fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src23.arf
[Wed May 22 13:15:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 13:15:22 2013] Updating source flux to 2.6e-13
[Wed May 22 13:15:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 13:15:43 2013] xmm0136140201/analysis//spectral/fullrun_mos1_xmm0136140201_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete