[Tue May 28 02:26:00 2013] Detection parameters:
  Position = (208.0, 222.0) = 9 0 13.93 -45 52 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 279.8 +/- 32.0
  Background counts = 213.7
  Rate = 0.01 +/- 0.002

[Tue May 28 02:26:14 2013] Off-axis axis estimate = 8.59'
[Tue May 28 02:28:40 2013] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Tue May 28 02:28:40 2013] Initial guess for spatial extent in simple fitting = 10.72"
[Tue May 28 02:28:40 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Tue May 28 02:28:40 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 10.72"
[Tue May 28 02:28:43 2013] fullrun_pn_xmm0136010101_pi300-10000_cl_pass0_src50.ximg exists
[Tue May 28 02:28:43 2013] fullrun_pn_xmm0136010101_pi300-10000_cl_pass0_src50_1.ximg exists
[Tue May 28 02:28:43 2013] Fit fullrun_pn_xmm0136010101_pi300-10000_cl_pass0_src50 appears to have run properly
[Tue May 28 02:28:47 2013] fullrun_pn_xmm0136010101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Tue May 28 02:28:47 2013] fullrun_pn_xmm0136010101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Tue May 28 02:28:47 2013] Fit fullrun_pn_xmm0136010101_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Tue May 28 02:29:55 2013] Source 54 is offset by -1.831180 and -1.331403 pixels which is larger than
2 X fitted extent = 1.247370 x 1.247370, not incorporating fit results
[Tue May 28 02:29:55 2013] Warning, spatial fit 50 centroid is now closest to src. 55
[Tue May 28 02:29:55 2013] Spatial fit model total counts = 4071.350000, observed total counts = 4073.000000
[Tue May 28 02:29:55 2013] Offset between fit and detection position for source 54 = 5.970121 pixels
[Tue May 28 02:29:55 2013] Warning, changing simple spatial fit ID from 50 to 53
[Tue May 28 02:29:55 2013] 4142.590000 total counts/ 3064.810000 bgd. counts: snr = 19.468314
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 5.970121 pixels
  Position = (207.2, 216.0) = 9 0 14.26 -45 52 47.5
  Extent = 21.8 (19.3-43.6)", rotation angle = 0
  Source counts = 1077.8 +/- 64.4
  Background counts = 3064.8
  Rate = 0.05 +/- 0.003
[Tue May 28 02:29:55 2013] Vigneting correction estimate = 1.000000
[Tue May 28 02:29:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 02:29:55 2013] Assessing source extent using major axis lower bound
[Tue May 28 02:29:55 2013] Source does appear to be extended
[Tue May 28 02:29:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 02:29:55 2013] Source is confused with source 51
[Tue May 28 02:32:06 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 28 02:32:06 2013] Initial guess for spatial extent in simple fitting = 21.82"
[Tue May 28 02:32:06 2013] source mask rpix=5.0, npix_max = 121, mask sum = 121, frac = 0.994
[Tue May 28 02:32:06 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 21.82"
[Tue May 28 02:32:08 2013] fullrun_pn_xmm0136010101_pi300-10000_cl_pass1_src46.ximg exists
[Tue May 28 02:32:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136010101_pi300-10000_cl_pass1_src46.csv
[Tue May 28 02:32:08 2013] fullrun_pn_xmm0136010101_pi300-10000_cl_pass1_src46_1.ximg exists
[Tue May 28 02:32:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136010101_pi300-10000_cl_pass1_src46.csv
[Tue May 28 02:32:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136010101_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136010101_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 02:32:11 2013] fullrun_pn_xmm0136010101_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Tue May 28 02:32:11 2013] fullrun_pn_xmm0136010101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Tue May 28 02:32:11 2013] Fit fullrun_pn_xmm0136010101_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Tue May 28 02:33:22 2013] Warning, spatial fit 46 centroid is now closest to src. 52
[Tue May 28 02:33:23 2013] Vigneting correction estimate = 1.000000
[Tue May 28 02:33:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 02:33:23 2013] Assessing source extent using major axis lower bound
[Tue May 28 02:33:23 2013] Source does appear to be extended
[Tue May 28 02:33:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 02:35:26 2013] Counts = 1077.780000, rescaling region sizes by 2.000000
[Tue May 28 02:35:26 2013] XMMSAS src. selection expression = ellipse(17981.944000, 18747.440000, 2618.184075, 2618.184075, 0.000000, X, Y)
[Tue May 28 02:35:26 2013] Not overwriting source region fullrun_pn_xmm0136010101_pi300-10000_pass1_cl_src54_src.reg
[Tue May 28 02:35:26 2013] Extracting stamp from image fullrun_pn_xmm0136010101_pi300-10000_cl_sm2.00.img.gz, (57, 66) - (358, 367)
[Tue May 28 02:35:26 2013] XMMSAS bgd. selection expression = annulus(17981.944000, 18747.440000, 8727.280251, 17454.560502, X, Y) && !ellipse(20213.066681, 15614.295746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19331.092000, 17485.868000, 3429.488099, 3429.488099, 0.000000, X, Y) && !ellipse(19645.386000, 16294.196000, 3371.408097, 3371.408097, 0.000000, X, Y) && !ellipse(16785.502182, 27588.058380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20865.402000, 15848.634000, 1685.704049, 1685.704049, -0.000000, X, Y) && !ellipse(12540.918793, 32743.543823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14368.911774, 30575.399109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14674.922000, 30175.874000, 1858.664053, 1858.664053, 0.000000, X, Y) && !ellipse(18518.052170, 29168.658386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15819.402000, 25766.634000, 1685.704049, 1685.704049, 0.000000, X, Y) && !ellipse(13345.456390, 32318.322296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15630.123703, 27459.416901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16310.404000, 25238.464000, 2261.528065, 2261.528065, 0.000000, X, Y) && !ellipse(17778.152588, 21275.361160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21151.624847, 16391.603363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15431.661591, 34229.584961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13135.118332, 32924.680542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13427.328000, 31319.788000, 1858.664053, 1858.664053, 0.000000, X, Y) && !ellipse(16266.852000, 33973.222000, 3787.600109, 3787.600109, 0.000000, X, Y) && !ellipse(13393.862000, 33423.212000, 1957.488056, 1957.488056, 0.000000, X, Y) && !ellipse(16054.554000, 33157.100000, 1756.752051, 1756.752051, 0.000000, X, Y) && !ellipse(15687.011688, 33365.240173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15770.264200, 32738.436640, 1018.904029, 1018.904029, 0.000000, X, Y) && !ellipse(14516.576538, 32390.212524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20099.878799, 31807.242432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14300.311127, 30142.021332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18874.000000, 29718.740631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15955.743134, 28750.324005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20362.374908, 14056.094894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15321.651779, 28406.983582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16094.431244, 27520.471954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15831.956000, 26551.496000, 3256.808094, 3256.808094, 0.000000, X, Y) && !ellipse(16243.081024, 25966.220459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16819.159988, 24996.760406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17016.983566, 24051.312439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16774.940400, 23524.178800, 1291.768037, 1291.768037, 0.000000, X, Y) && !ellipse(16619.312200, 22643.493700, 870.792025, 870.792025, 0.000000, X, Y) && !ellipse(18475.530000, 22090.330800, 1570.440045, 1570.440045, 0.000000, X, Y) && !ellipse(16824.637314, 21953.679993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18917.351318, 21353.040680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17999.903000, 21343.278000, 1969.176057, 1969.176057, 0.000000, X, Y) && !ellipse(17196.432000, 21571.252000, 1689.680049, 1689.680049, 0.000000, X, Y) && !ellipse(17921.543000, 20594.383600, 986.832028, 986.832028, 0.000000, X, Y) && !ellipse(17811.753200, 19857.783800, 1697.856049, 1697.856049, 0.000000, X, Y) && !ellipse(17533.626000, 19602.168000, 3449.824099, 3449.824099, 0.000000, X, Y) && !ellipse(18837.209259, 19251.608887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18327.464000, 18680.584000, 1714.744049, 1714.744049, 0.000000, X, Y) && !ellipse(18349.320200, 18403.050000, 1724.912050, 1724.912050, 0.000000, X, Y) && !ellipse(20049.130569, 17782.413910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21251.899994, 16994.492813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22219.544000, 16327.932000, 1724.656050, 1724.656050, 0.000000, X, Y) && !ellipse(22017.421936, 14658.867523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15689.338821, 34748.722839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15443.880000, 36350.306000, 1963.728057, 1963.728057, 0.000000, X, Y) && !ellipse(14306.068558, 33620.754883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14722.610000, 33908.832000, 1713.416049, 1713.416049, 0.000000, X, Y) && !ellipse(19656.968140, 31974.649994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15802.092606, 31802.643921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21223.001328, 14042.527695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15984.360367, 30822.263733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16329.427887, 30399.407837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17608.782959, 24399.333679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16588.365900, 23815.232000, 1659.648048, 1659.648048, 0.000000, X, Y) && !ellipse(15887.344000, 20539.810000, 1748.736050, 1748.736050, 0.000000, X, Y) && !ellipse(15790.664000, 19384.360000, 1780.784051, 1780.784051, 0.000000, X, Y) && !ellipse(25304.356171, 19686.429672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26334.613739, 18509.144547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20813.382080, 17684.184464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15475.207600, 36669.182000, 1392.080040, 1392.080040, 0.000000, X, Y) && !ellipse(16663.862015, 36148.602966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16473.554825, 32494.595001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16751.675781, 28056.017914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25576.860413, 23273.757904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16339.641785, 20915.928604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25893.738159, 20841.683365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25374.340088, 18486.852921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14994.704000, 37268.204000, 2784.160080, 2784.160080, 0.000000, X, Y) && !ellipse(24612.176758, 36651.489410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25023.940000, 37106.254000, 1749.560050, 1749.560050, 0.000000, X, Y) && !ellipse(24282.262200, 36306.316220, 941.272027, 941.272027, 0.000000, X, Y) && !ellipse(16657.908112, 35543.540375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32605.253967, 35084.684937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17070.475769, 33701.250061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14781.764000, 32867.598000, 1902.536055, 1902.536055, 0.000000, X, Y) && !ellipse(20522.421402, 32209.978516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21689.836456, 31680.082458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16048.032200, 31472.248000, 1434.640041, 1434.640041, 0.000000, X, Y) && !ellipse(23049.370758, 30589.959290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24951.484000, 30426.296000, 1301.752037, 1301.752037, 0.000000, X, Y) && !ellipse(25339.447693, 29444.452209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24618.041718, 29460.613373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.868000, 29262.466000, 1266.952036, 1266.952036, 0.000000, X, Y) && !ellipse(26637.395935, 28054.560303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27288.002899, 27966.333679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25813.771332, 27699.373138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25131.649170, 27709.560486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26021.827393, 27086.674683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23591.625977, 27009.946991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25064.062744, 26922.020386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23224.000000, 26516.156677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27073.131378, 26154.438141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26211.606232, 26325.621155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13447.031174, 25867.280792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25568.828949, 26050.894653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25909.224945, 25618.239044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22396.305237, 25618.722260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22006.796509, 25535.834900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22149.408752, 25033.272369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26460.045288, 24408.735138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25812.555328, 24666.331390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25502.304535, 23956.660645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18307.209656, 23533.581726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26610.840332, 23616.994781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25496.912170, 22489.101166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26120.573242, 22489.212677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.444580, 22047.239243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25845.483002, 22047.792816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25715.232574, 21520.555771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19068.093262, 20576.169815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25834.007965, 20311.666504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26470.811432, 20303.337677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18662.015200, 20190.840000, 1676.680048, 1676.680048, 0.000000, X, Y) && !ellipse(26041.275482, 19697.032532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16861.105469, 19368.663818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26662.533752, 19784.835678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26110.550507, 19099.952286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26676.318665, 18908.423782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25126.705505, 19178.507965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20603.070572, 18294.133636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30214.989502, 15170.654953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29453.774017, 15438.208893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25941.271149, 14490.273163, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 02:35:26 2013] Writing fullrun_pn_xmm0136010101_pi300-10000_pass1_cl_src54.gif
[Tue May 28 05:19:23 2013] Mean detx,y = (-9480.97, 7374.15) 
[Tue May 28 05:19:32 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 05:25:41 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 05:25:42 2013] Setting source spectrum file to fullrun_pn_xmm0136010101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Tue May 28 05:25:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0136010101_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Tue May 28 10:10:34 2013] Updating aperture counts using extracted products
[Tue May 28 10:10:34 2013] Total counts from fullrun_pn_xmm0136010101_pi300-10000_pass1_cl_src54_src_b10.pi.gz = 36807.00
[Tue May 28 10:10:34 2013] Total counts from fullrun_pn_xmm0136010101_pi300-10000_pass1_cl_src54_bgd.pi.gz = 146391.00
[Tue May 28 10:10:34 2013] Got source and background scale factors 21022570.000000, 180525140.000000
[Tue May 28 10:10:34 2013] User source parameters:
  Position = (207.2, 216.0) = 9 0 14.26 -45 52 47.5
  Extent = 21.8 (19.3-43.6)", rotation angle = 0
  Source aperture counts = 19759.4 +/- 192.9
  Background aperture counts = 17047.6
  Rate = 1 +/- 0.01

[Tue May 28 10:11:10 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 10:11:10 2013] Using photon index=1.80, rate=0.055, arf fullrun_pn_xmm0136010101_pi300-10000_pass1_cl_src54.arf
[Tue May 28 10:11:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 10:11:10 2013] Updating source flux to 5.3e-13
[Tue May 28 10:13:58 2013] Flag b found in src. 54 procflags, skipping spectral fitting
[Tue May 28 10:13:58 2013] Flag c found in src. 54 procflags, skipping spectral fitting
[Tue May 28 10:14:48 2013] xmm0136010101/analysis//spectral/fullrun_pn_xmm0136010101_pi300-10000_pass1_cl_src54_pl.csv not found, spectral fit skipped or did not complete