[Tue May 28 02:26:24 2013] Detection parameters:
  Position = (204.7, 262.8) = 9 0 15.29 -45 49 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.9 +/- 16.9
  Background counts = 67.0
  Rate = 0.007 +/- 0.001

[Tue May 28 02:26:26 2013] Off-axis axis estimate = 7.27'
[Tue May 28 02:28:49 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Tue May 28 02:28:49 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Tue May 28 02:28:49 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.947
[Tue May 28 02:28:49 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 10.07"
[Tue May 28 02:28:51 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src21.ximg exists
[Tue May 28 02:28:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src21.csv
[Tue May 28 02:28:51 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue May 28 02:28:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src21.csv
[Tue May 28 02:28:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 02:28:55 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue May 28 02:28:55 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue May 28 02:28:55 2013] Fit fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue May 28 02:30:37 2013] Warning, spatial fit 21 centroid is now closest to src. 92
[Tue May 28 02:30:37 2013] Spatial fit model total counts = 1288.790000, observed total counts = 1288.000000
[Tue May 28 02:30:37 2013] Offset between fit and detection position for source 91 = 4.930760 pixels
[Tue May 28 02:30:37 2013] Warning, changing simple spatial fit ID from 21 to 53
[Tue May 28 02:30:37 2013] 1271.188000 total counts/ 964.874000 bgd. counts: snr = 9.861240
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 4.930760 pixels
  Position = (200.0, 264.5) = 9 0 17.22 -45 49 16.8
  Extent = 20.4 (20.4-40.9)", rotation angle = 0
  Source counts = 306.3 +/- 35.7
  Background counts = 964.9
  Rate = 0.01 +/- 0.001
[Tue May 28 02:30:37 2013] Source 91 is offset by 0.465253 and 2.750207 pixels which is larger than
2 X fitted extent = 1.217766 x 1.217766, not incorporating fit results
[Tue May 28 02:30:38 2013] Vigneting correction estimate = 1.000000
[Tue May 28 02:30:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 02:30:38 2013] Assessing source extent using major axis lower bound
[Tue May 28 02:30:38 2013] Source does appear to be extended
[Tue May 28 02:30:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 02:30:38 2013] Source is confused with source 37
[Tue May 28 02:30:38 2013] Source is confused with source 92
[Tue May 28 02:30:38 2013] Source is confused with source 94
[Tue May 28 02:30:38 2013] Source is confused with source 93
[Tue May 28 02:30:38 2013] Source is confused with source 89
[Tue May 28 02:32:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 28 02:32:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 28 02:32:13 2013] Initial guess for spatial extent in simple fitting = 20.44"
[Tue May 28 02:32:13 2013] source mask rpix=4.7, npix_max = 108, mask sum = 110, frac = 1.017
[Tue May 28 02:32:13 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 20.44"
[Tue May 28 02:32:15 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src17.ximg exists
[Tue May 28 02:32:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src17.csv
[Tue May 28 02:32:15 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue May 28 02:32:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src17.csv
[Tue May 28 02:32:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 02:32:18 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue May 28 02:32:19 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue May 28 02:32:19 2013] Fit fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Tue May 28 02:33:59 2013] Warning, spatial fit 17 centroid is now closest to src. 84
[Tue May 28 02:33:59 2013] Spatial fit model total counts = 3895.700000, observed total counts = 3901.000000
[Tue May 28 02:33:59 2013] Offset between fit and detection position for source 91 = 9.831047 pixels
[Tue May 28 02:33:59 2013] Warning, changing simple spatial fit ID from 17 to 68
[Tue May 28 02:33:59 2013] 3904.600000 total counts/ 2834.410000 bgd. counts: snr = 20.101550
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 9.831047 pixels
  Position = (205.7, 272.5) = 9 0 14.86 -45 48 41.9
  Extent = 41.5 (37.8-83.0)", rotation angle = 0
  Source counts = 1070.2 +/- 62.5
  Background counts = 2834.4
  Rate = 0.04 +/- 0.003
[Tue May 28 02:33:59 2013] Source 91 is offset by 4.036575 and 0.138115 pixels which is larger than
2 X fitted extent = 1.383122 x 1.383122, not incorporating fit results
[Tue May 28 02:34:00 2013] Vigneting correction estimate = 1.000000
[Tue May 28 02:34:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 02:34:00 2013] Assessing source extent using major axis lower bound
[Tue May 28 02:34:00 2013] Source does appear to be extended
[Tue May 28 02:34:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 10:08:37 2013] Counts = 1070.190000, rescaling region sizes by 2.000000
[Tue May 28 10:08:37 2013] XMMSAS src. selection expression = ellipse(17846.884000, 23658.534000, 4978.800143, 4978.800143, 0.000000, X, Y)
[Tue May 28 10:08:37 2013] Not overwriting source region fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91_src.reg
[Tue May 28 10:08:37 2013] Extracting stamp from image fullrun_mos1_xmm0136010101_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (492, 559)
[Tue May 28 10:08:38 2013] XMMSAS bgd. selection expression = annulus(17846.884000, 23658.534000, 16596.000478, 33192.000955, X, Y) && !ellipse(18280.741000, 21735.510000, 1634.024047, 1634.024047, 0.000000, X, Y) && !ellipse(19294.188919, 16827.598999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26351.577400, 18496.534800, 362.399210, 362.399210, 0.000000, X, Y) && !ellipse(21082.862244, 15528.773270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15024.044000, 29284.748000, 3391.568098, 3391.568098, 0.000000, X, Y) && !ellipse(14705.332000, 30481.532000, 2296.696066, 2296.696066, 0.000000, X, Y) && !ellipse(17746.786000, 21186.746000, 1208.152035, 1208.152035, 0.000000, X, Y) && !ellipse(20556.584991, 15956.689651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19115.853256, 21271.632172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17235.792000, 28231.546000, 1092.856031, 1092.856031, 0.000000, X, Y) && !ellipse(17546.488000, 27238.886000, 1548.880045, 1548.880045, 0.000000, X, Y) && !ellipse(19083.837585, 21784.818802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17729.719600, 21296.664000, 1584.328046, 1584.328046, 0.000000, X, Y) && !ellipse(15551.721800, 26364.405800, 591.815217, 591.815217, 0.000000, X, Y) && !ellipse(17354.524000, 24331.044000, 3112.224090, 3112.224090, 0.000000, X, Y) && !ellipse(20503.445908, 15097.581909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14860.788000, 28640.570000, 1757.216051, 1757.216051, 0.000000, X, Y) && !ellipse(12706.702000, 32781.858000, 1411.456041, 1411.456041, 0.000000, X, Y) && !ellipse(13348.124000, 32011.422000, 1896.888055, 1896.888055, 0.000000, X, Y) && !ellipse(19253.322708, 15780.742188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15422.513687, 28668.456177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17138.271400, 23505.817400, 586.497617, 586.497617, 0.000000, X, Y) && !ellipse(15892.380000, 28181.406000, 1751.776050, 1751.776050, 0.000000, X, Y) && !ellipse(18382.380000, 25484.746000, 1556.112045, 1556.112045, 0.000000, X, Y) && !ellipse(15470.390000, 27718.126000, 1706.312049, 1706.312049, 0.000000, X, Y) && !ellipse(17547.282000, 21642.796000, 885.888025, 885.888025, 0.000000, X, Y) && !ellipse(17428.252914, 20569.269394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25688.596000, 19908.054000, 1479.776043, 1479.776043, 0.000000, X, Y) && !ellipse(18427.251495, 22984.104828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21112.574677, 16221.682816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15943.064000, 26610.620000, 1713.520049, 1713.520049, 0.000000, X, Y) && !ellipse(18141.241119, 26603.876190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20862.693939, 16728.030090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16485.186508, 25100.691528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17737.938187, 24640.367859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16053.360596, 27619.095673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15896.419159, 33626.314514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21699.070648, 14907.564117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25330.314392, 19172.769119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17972.510025, 19173.622711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26400.652283, 21152.738632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25494.700600, 21108.527200, 1359.800039, 796.711223, 146.680400, X, Y) && !ellipse(18279.003952, 17963.111221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15948.186000, 27025.148000, 2617.904075, 2617.904075, 0.000000, X, Y) && !ellipse(13260.046000, 32562.816000, 3534.552102, 3534.552102, 0.000000, X, Y) && !ellipse(20264.429550, 17442.351120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15214.833313, 28141.262939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16041.721780, 30536.362000, 1434.736041, 1434.736041, 0.000000, X, Y) && !ellipse(18384.703323, 20839.551376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25944.373200, 22093.062000, 1274.576037, 1274.576037, 0.000000, X, Y) && !ellipse(18454.075256, 20331.717285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16221.126587, 33013.900146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25614.718200, 23904.945200, 2288.800066, 870.944025, 90.000000, X, Y) && !ellipse(15731.297757, 32077.201864, 1284.584037, 685.326556, 90.000000, X, Y) && !ellipse(16404.074000, 31549.136000, 2859.224082, 2859.224082, 0.000000, X, Y) && !ellipse(17033.076000, 24679.908000, 1659.600048, 1659.600048, 0.000000, X, Y) && !ellipse(14608.263000, 30774.340000, 1767.352051, 1767.352051, 0.000000, X, Y) && !ellipse(18028.969600, 19752.898000, 1687.344049, 1687.344049, 0.000000, X, Y) && !ellipse(16563.296000, 25475.262000, 1604.688046, 1199.080035, 61.872000, X, Y) && !ellipse(17532.420334, 19818.542603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13738.358000, 31704.946000, 1963.080056, 1963.080056, 0.000000, X, Y) && !ellipse(16907.921600, 21101.527100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19296.032000, 17583.088000, 1070.776031, 1070.776031, 0.000000, X, Y) && !ellipse(20879.684000, 17595.644780, 895.016026, 895.016026, 0.000000, X, Y) && !ellipse(24993.492065, 11789.106094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15457.561401, 34653.216125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16073.883972, 24383.193756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15779.198000, 26974.884000, 2803.744081, 2803.744081, 0.000000, X, Y) && !ellipse(16665.052795, 22748.709930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16164.829800, 20076.967600, 1787.040051, 874.312025, 67.675000, X, Y) && !ellipse(20464.256348, 18833.614349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15012.292000, 30127.120000, 1391.208040, 1391.208040, 0.000000, X, Y) && !ellipse(17132.003418, 22499.792969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16248.080000, 19250.384000, 1742.384050, 1742.384050, 0.000000, X, Y) && !ellipse(16663.263306, 27342.038055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25039.994904, 18733.226364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26496.372000, 12340.619800, 1872.176054, 1872.176054, 0.000000, X, Y) && !ellipse(16415.464000, 23250.412000, 1663.968048, 1663.968048, 0.000000, X, Y)
[Tue May 28 10:08:38 2013] Writing fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91.gif
[Tue May 28 10:08:44 2013] ../../xmm0136010101/products/events/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91_src.evt and ../../xmm0136010101/products/events/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91_bgd.evt exist, delete to re-create
[Tue May 28 10:08:44 2013] Mean detx,y = (-2432.70, -9314.26) 
[Tue May 28 10:08:44 2013] ../../xmm0136010101/products/images/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91_src.img and ../../xmm0136010101/products/images/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91_bgd.img exist, delete to re-create
[Tue May 28 10:08:44 2013] ../../xmm0136010101/products/spectra/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91_src_b10.pi.gz and ../../xmm0136010101/products/spectra/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91_bgd.pi exist, delete to re-create
[Tue May 28 10:08:44 2013] Setting source spectrum file to fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Tue May 28 10:08:44 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Tue May 28 10:08:44 2013] ../../xmm0136010101/products/lightcurves/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91_src.lc and ../../xmm0136010101/products/lightcurves/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91_bgd.lc exist, delete to re-create
[Tue May 28 10:09:06 2013] fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91.rmf exists, delete to re-create
[Tue May 28 10:09:06 2013] fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91.arf exists, delete to re-create
[Tue May 28 10:11:17 2013] Updating aperture counts using extracted products
[Tue May 28 10:11:17 2013] Total counts from fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91_src_b10.pi.gz = 35660.00
[Tue May 28 10:11:18 2013] Total counts from fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91_bgd.pi.gz = 46162.00
[Tue May 28 10:11:18 2013] Got source and background scale factors 73371600.000000, 299513778.000000
[Tue May 28 10:11:18 2013] User source parameters:
  Position = (205.7, 272.5) = 9 0 14.86 -45 48 41.9
  Extent = 41.5 (37.8-83.0)", rotation angle = 0
  Source aperture counts = 24351.7 +/- 189.8
  Background aperture counts = 11308.3
  Rate = 1 +/- 0.008

[Tue May 28 10:11:33 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 10:11:33 2013] Using photon index=1.80, rate=0.0446, arf fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91.arf
[Tue May 28 10:11:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 10:11:33 2013] Updating source flux to 1e-12
[Tue May 28 10:12:06 2013] Flag b found in src. 91 procflags, skipping spectral fitting
[Tue May 28 10:12:06 2013] Flag c found in src. 91 procflags, skipping spectral fitting
[Tue May 28 10:13:04 2013] xmm0136010101/analysis//spectral/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src91_pl.csv not found, spectral fit skipped or did not complete