[Tue May 28 02:26:17 2013] Detection parameters:
  Position = (162.8, 361.8) = 9 0 32.59 -45 42 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.8 +/- 15.9
  Background counts = 55.8
  Rate = 0.003 +/- 0.0007

[Tue May 28 02:26:26 2013] Off-axis axis estimate = 10.85'
[Tue May 28 02:28:49 2013] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Tue May 28 02:28:49 2013] Initial guess for spatial extent in simple fitting = 11.86"
[Tue May 28 02:28:49 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.865
[Tue May 28 02:28:49 2013] Giving source the simple spatial ID 83 for pass 0, mean size = 11.86"
[Tue May 28 02:28:53 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src83.ximg exists
[Tue May 28 02:28:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src83.csv
[Tue May 28 02:28:53 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src83_1.ximg exists
[Tue May 28 02:28:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src83.csv
[Tue May 28 02:28:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 02:28:58 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Tue May 28 02:28:58 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Tue May 28 02:28:58 2013] Fit fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Tue May 28 02:30:37 2013] Spatial fit model total counts = 1054.350000, observed total counts = 1054.000000
[Tue May 28 02:30:37 2013] Offset between fit and detection position for source 26 = 5.367699 pixels
[Tue May 28 02:30:37 2013] Warning, changing simple spatial fit ID from 83 to 26
[Tue May 28 02:30:37 2013] 1062.730000 total counts/ 425.201000 bgd. counts: snr = 30.917389
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 5.367699 pixels
  Position = (158.5, 365.0) = 9 0 34.39 -45 41 59.1
  Extent = 24.5 (24.5-49.1)", rotation angle = 0
  Source counts = 637.5 +/- 32.6
  Background counts = 425.2
  Rate = 0.03 +/- 0.001
[Tue May 28 02:30:38 2013] Vigneting correction estimate = 1.000000
[Tue May 28 02:30:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 02:30:38 2013] Assessing source extent using major axis lower bound
[Tue May 28 02:30:38 2013] Source does appear to be extended
[Tue May 28 02:30:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 02:30:38 2013] Source is confused with source 6
[Tue May 28 02:30:38 2013] Source is confused with source 25
[Tue May 28 02:32:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 28 02:32:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 28 02:32:13 2013] Initial guess for spatial extent in simple fitting = 24.54"
[Tue May 28 02:32:13 2013] source mask rpix=5.6, npix_max = 150, mask sum = 156, frac = 1.034
[Tue May 28 02:32:13 2013] Giving source the simple spatial ID 73 for pass 1, mean size = 24.54"
[Tue May 28 02:32:17 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src73.ximg exists
[Tue May 28 02:32:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src73.csv
[Tue May 28 02:32:17 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src73_1.ximg exists
[Tue May 28 02:32:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src73.csv
[Tue May 28 02:32:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 02:32:23 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Tue May 28 02:32:23 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Tue May 28 02:32:23 2013] Fit fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Tue May 28 02:33:59 2013] Warning, spatial fit 73 centroid is now closest to src. 7
[Tue May 28 02:34:00 2013] Vigneting correction estimate = 1.000000
[Tue May 28 02:34:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 02:34:00 2013] Assessing source extent using major axis lower bound
[Tue May 28 02:34:00 2013] Source does appear to be extended
[Tue May 28 02:34:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 10:08:40 2013] XMMSAS src. selection expression = ellipse(13738.358000, 31704.946000, 1472.310042, 1472.310042, 0.000000, X, Y)
[Tue May 28 10:08:40 2013] Not overwriting source region fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26_src.reg
[Tue May 28 10:08:40 2013] Extracting stamp from image fullrun_mos1_xmm0136010101_pi300-10000_cl_sm2.00.img.gz, (74, 280) - (243, 450)
[Tue May 28 10:08:40 2013] XMMSAS bgd. selection expression = annulus(13738.358000, 31704.946000, 2453.850071, 4907.700141, X, Y) && !ellipse(15024.044000, 29284.748000, 3391.568098, 3391.568098, 0.000000, X, Y) && !ellipse(14705.332000, 30481.532000, 2296.696066, 2296.696066, 0.000000, X, Y) && !ellipse(17235.792000, 28231.546000, 1092.856031, 1092.856031, 0.000000, X, Y) && !ellipse(17546.488000, 27238.886000, 1548.880045, 1548.880045, 0.000000, X, Y) && !ellipse(15551.721800, 26364.405800, 591.815217, 591.815217, 0.000000, X, Y) && !ellipse(17354.524000, 24331.044000, 3112.224090, 3112.224090, 0.000000, X, Y) && !ellipse(17846.884000, 23658.534000, 3319.200096, 3319.200096, 0.000000, X, Y) && !ellipse(14860.788000, 28640.570000, 1757.216051, 1757.216051, 0.000000, X, Y) && !ellipse(12706.702000, 32781.858000, 1411.456041, 1411.456041, 0.000000, X, Y) && !ellipse(13348.124000, 32011.422000, 1896.888055, 1896.888055, 0.000000, X, Y) && !ellipse(15422.513687, 28668.456177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15892.380000, 28181.406000, 1751.776050, 1751.776050, 0.000000, X, Y) && !ellipse(18382.380000, 25484.746000, 1556.112045, 1556.112045, 0.000000, X, Y) && !ellipse(15470.390000, 27718.126000, 1706.312049, 1706.312049, 0.000000, X, Y) && !ellipse(15943.064000, 26610.620000, 1713.520049, 1713.520049, 0.000000, X, Y) && !ellipse(18141.241119, 26603.876190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16053.360596, 27619.095673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15896.419159, 33626.314514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15948.186000, 27025.148000, 2617.904075, 2617.904075, 0.000000, X, Y) && !ellipse(13260.046000, 32562.816000, 3534.552102, 3534.552102, 0.000000, X, Y) && !ellipse(15214.833313, 28141.262939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16041.721780, 30536.362000, 1434.736041, 1434.736041, 0.000000, X, Y) && !ellipse(16221.126587, 33013.900146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15731.297757, 32077.201864, 1284.584037, 685.326556, 90.000000, X, Y) && !ellipse(16404.074000, 31549.136000, 2859.224082, 2859.224082, 0.000000, X, Y) && !ellipse(14608.263000, 30774.340000, 1767.352051, 1767.352051, 0.000000, X, Y) && !ellipse(16563.296000, 25475.262000, 1604.688046, 1199.080035, 61.872000, X, Y) && !ellipse(15457.561401, 34653.216125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15779.198000, 26974.884000, 2803.744081, 2803.744081, 0.000000, X, Y) && !ellipse(15012.292000, 30127.120000, 1391.208040, 1391.208040, 0.000000, X, Y) && !ellipse(16663.263306, 27342.038055, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 10:08:40 2013] Writing fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26.gif
[Tue May 28 10:08:45 2013] ../../xmm0136010101/products/events/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0136010101/products/events/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Tue May 28 10:08:45 2013] Mean detx,y = (6041.57, -12526.50) 
[Tue May 28 10:08:45 2013] ../../xmm0136010101/products/images/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26_src.img and ../../xmm0136010101/products/images/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Tue May 28 10:08:45 2013] ../../xmm0136010101/products/spectra/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26_src_b10.pi.gz and ../../xmm0136010101/products/spectra/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Tue May 28 10:08:45 2013] Setting source spectrum file to fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue May 28 10:08:45 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue May 28 10:08:45 2013] ../../xmm0136010101/products/lightcurves/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0136010101/products/lightcurves/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Tue May 28 10:09:06 2013] fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26.rmf exists, delete to re-create
[Tue May 28 10:09:06 2013] fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26.arf exists, delete to re-create
[Tue May 28 10:11:28 2013] Updating aperture counts using extracted products
[Tue May 28 10:11:28 2013] Total counts from fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 2787.00
[Tue May 28 10:11:28 2013] Total counts from fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 1529.00
[Tue May 28 10:11:29 2013] Got source and background scale factors 6807960.000000, 9475527.000000
[Tue May 28 10:11:29 2013] User source parameters:
  Position = (158.5, 365.0) = 9 0 34.39 -45 41 59.1
  Extent = 24.5 (24.5-49.1)", rotation angle = 0
  Source aperture counts = 1688.4 +/- 53.8
  Background aperture counts = 1098.6
  Rate = 0.07 +/- 0.002

[Tue May 28 10:11:35 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 10:11:35 2013] Using photon index=1.80, rate=0.0265, arf fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26.arf
[Tue May 28 10:11:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 10:11:35 2013] Updating source flux to 9.1e-13
[Tue May 28 10:12:06 2013] Flag c found in src. 26 procflags, skipping spectral fitting
[Tue May 28 10:13:04 2013] xmm0136010101/analysis//spectral/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete