[Tue May 28 02:26:16 2013] Detection parameters:
  Position = (179.7, 303.1) = 9 0 25.62 -45 46 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.9 +/- 20.6
  Background counts = 60.5
  Rate = 0.007 +/- 0.0009

[Tue May 28 02:26:26 2013] Off-axis axis estimate = 8.61'
[Tue May 28 02:28:49 2013] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Tue May 28 02:28:49 2013] Initial guess for spatial extent in simple fitting = 10.73"
[Tue May 28 02:28:49 2013] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.965
[Tue May 28 02:28:49 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 10.73"
[Tue May 28 02:28:51 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src19.ximg exists
[Tue May 28 02:28:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src19.csv
[Tue May 28 02:28:51 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue May 28 02:28:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src19.csv
[Tue May 28 02:28:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 02:28:55 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue May 28 02:28:55 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue May 28 02:28:55 2013] Fit fullrun_mos1_xmm0136010101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue May 28 02:30:37 2013] Spatial fit model total counts = 1357.570000, observed total counts = 1308.000000
[Tue May 28 02:30:37 2013] Offset between fit and detection position for source 11 = 0.521438 pixels
[Tue May 28 02:30:37 2013] 1333.949400 total counts/ 1236.420000 bgd. counts: snr = 2.773656
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.521438 pixels
  Position = (179.6, 303.6) = 9 0 25.67 -45 46 26.2
  Extent = 7.8 (4.7-21.5)", rotation angle = 0
  Source counts = 97.5 +/- 36.5
  Background counts = 1236.4
  Rate = 0.004 +/- 0.002
[Tue May 28 02:30:38 2013] Vigneting correction estimate = 1.000000
[Tue May 28 02:30:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 02:30:38 2013] Assessing source extent using major axis lower bound
[Tue May 28 02:30:38 2013] Source does appear to be extended
[Tue May 28 02:30:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 02:30:38 2013] Source is confused with source 12
[Tue May 28 02:32:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 28 02:32:13 2013] Initial guess for spatial extent in simple fitting = 7.82"
[Tue May 28 02:32:13 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.184
[Tue May 28 02:32:13 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 7.82"
[Tue May 28 02:32:15 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src15.ximg exists
[Tue May 28 02:32:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src15.csv
[Tue May 28 02:32:15 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue May 28 02:32:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src15.csv
[Tue May 28 02:32:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 02:32:18 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue May 28 02:32:18 2013] fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue May 28 02:32:18 2013] Fit fullrun_mos1_xmm0136010101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue May 28 02:33:59 2013] Spatial fit model total counts = 1338.640000, observed total counts = 1294.000000
[Tue May 28 02:33:59 2013] Offset between fit and detection position for source 11 = 0.314845 pixels
[Tue May 28 02:33:59 2013] 883.867100 total counts/ 795.267000 bgd. counts: snr = 3.141794
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.314845 pixels
  Position = (179.3, 303.6) = 9 0 25.80 -45 46 26.4
  Extent = 7.4 (3.1-15.6)", rotation angle = 0
  Source counts = 88.6 +/- 29.7
  Background counts = 795.3
  Rate = 0.004 +/- 0.001
[Tue May 28 02:34:00 2013] Vigneting correction estimate = 1.000000
[Tue May 28 02:34:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 02:34:00 2013] Assessing source extent using major axis lower bound
[Tue May 28 02:34:00 2013] Source does appear to be extended
[Tue May 28 02:34:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 10:08:37 2013] XMMSAS src. selection expression = ellipse(15551.721800, 26364.405800, 443.861413, 443.861413, 0.000000, X, Y)
[Tue May 28 10:08:37 2013] Not overwriting source region fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11_src.reg
[Tue May 28 10:08:37 2013] Extracting stamp from image fullrun_mos1_xmm0136010101_pi300-10000_cl_sm2.00.img.gz, (154, 278) - (205, 329)
[Tue May 28 10:08:37 2013] XMMSAS bgd. selection expression = annulus(15551.721800, 26364.405800, 739.769021, 1479.538043, X, Y) && !ellipse(15024.044000, 29284.748000, 3391.568098, 3391.568098, 0.000000, X, Y) && !ellipse(17235.792000, 28231.546000, 1092.856031, 1092.856031, 0.000000, X, Y) && !ellipse(17546.488000, 27238.886000, 1548.880045, 1548.880045, 0.000000, X, Y) && !ellipse(17354.524000, 24331.044000, 3112.224090, 3112.224090, 0.000000, X, Y) && !ellipse(17846.884000, 23658.534000, 3319.200096, 3319.200096, 0.000000, X, Y) && !ellipse(14860.788000, 28640.570000, 1757.216051, 1757.216051, 0.000000, X, Y) && !ellipse(15422.513687, 28668.456177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15892.380000, 28181.406000, 1751.776050, 1751.776050, 0.000000, X, Y) && !ellipse(18382.380000, 25484.746000, 1556.112045, 1556.112045, 0.000000, X, Y) && !ellipse(15470.390000, 27718.126000, 1706.312049, 1706.312049, 0.000000, X, Y) && !ellipse(15943.064000, 26610.620000, 1713.520049, 1713.520049, 0.000000, X, Y) && !ellipse(16485.186508, 25100.691528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17737.938187, 24640.367859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16053.360596, 27619.095673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15948.186000, 27025.148000, 2617.904075, 2617.904075, 0.000000, X, Y) && !ellipse(15214.833313, 28141.262939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17033.076000, 24679.908000, 1659.600048, 1659.600048, 0.000000, X, Y) && !ellipse(16563.296000, 25475.262000, 1604.688046, 1199.080035, 61.872000, X, Y) && !ellipse(16073.883972, 24383.193756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15779.198000, 26974.884000, 2803.744081, 2803.744081, 0.000000, X, Y) && !ellipse(16663.263306, 27342.038055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16415.464000, 23250.412000, 1663.968048, 1663.968048, 0.000000, X, Y)
[Tue May 28 10:08:37 2013] Writing fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11.gif
[Tue May 28 10:08:44 2013] ../../xmm0136010101/products/events/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0136010101/products/events/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Tue May 28 10:08:44 2013] Mean detx,y = (470.73, -11540.00) 
[Tue May 28 10:08:44 2013] ../../xmm0136010101/products/images/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11_src.img and ../../xmm0136010101/products/images/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Tue May 28 10:08:44 2013] ../../xmm0136010101/products/spectra/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0136010101/products/spectra/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Tue May 28 10:08:44 2013] Setting source spectrum file to fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue May 28 10:08:44 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue May 28 10:08:44 2013] ../../xmm0136010101/products/lightcurves/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0136010101/products/lightcurves/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Tue May 28 10:09:06 2013] Not generating rmf since there are only 88 counts
[Tue May 28 10:09:06 2013] rmf not generated due to insufficient counts
[Tue May 28 10:09:06 2013] fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Tue May 28 10:11:17 2013] Updating aperture counts using extracted products
[Tue May 28 10:11:17 2013] Total counts from fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 442.00
[Tue May 28 10:11:17 2013] Total counts from fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 0.00
[Tue May 28 10:11:17 2013] Got source and background scale factors 566618.000000, 0.000000
[Tue May 28 10:11:17 2013] Background scale factor is not positive, halting re-assessment of this source
[Tue May 28 10:11:33 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 10:11:33 2013] Using photon index=1.80, rate=0.00369, arf fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11.arf
[Tue May 28 10:11:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 10:11:33 2013] Updating source flux to 1.5e-13
[Tue May 28 10:12:06 2013] Flag c found in src. 11 procflags, skipping spectral fitting
[Tue May 28 10:12:06 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 28 10:13:04 2013] xmm0136010101/analysis//spectral/fullrun_mos1_xmm0136010101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete