[Wed May 30 04:31:26 2012] Detection parameters:
  Position = (309.7, 371.7) = 13 3 50.80 67 34 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.6 +/- 13.2
  Background counts = 27.2
  Rate = 0.005 +/- 0.0007

[Wed May 30 04:31:26 2012] Off-axis axis estimate = 5.37'
[Wed May 30 04:33:15 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Wed May 30 04:33:15 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Wed May 30 04:33:15 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.854
[Wed May 30 04:33:15 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.12"
[Wed May 30 06:00:04 2012] fullrun_pn_xmm0136000101_pi300-10000_cl_pass0_src27.ximg exists
[Wed May 30 06:00:04 2012] fullrun_pn_xmm0136000101_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed May 30 06:00:04 2012] Fit fullrun_pn_xmm0136000101_pi300-10000_cl_pass0_src27 appears to have run properly
[Wed May 30 06:00:05 2012] fullrun_pn_xmm0136000101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed May 30 06:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136000101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Wed May 30 06:00:05 2012] fullrun_pn_xmm0136000101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed May 30 06:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136000101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Wed May 30 06:00:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136000101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136000101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 06:55:37 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 11.780359 pixels away
[Wed May 30 06:55:37 2012] Vigneting correction estimate = 1.000000
[Wed May 30 06:55:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 06:55:37 2012] Assessing source extent using major
[Wed May 30 06:55:37 2012] Source does appear to be extended
[Wed May 30 06:55:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 06:55:52 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Wed May 30 06:55:52 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Wed May 30 06:55:52 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.854
[Wed May 30 06:55:52 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 9.12"
[Wed May 30 08:18:21 2012] fullrun_pn_xmm0136000101_pi300-10000_cl_pass1_src25.ximg exists
[Wed May 30 08:18:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136000101_pi300-10000_cl_pass1_src25.csv
[Wed May 30 08:18:21 2012] fullrun_pn_xmm0136000101_pi300-10000_cl_pass1_src25_1.ximg exists
[Wed May 30 08:18:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136000101_pi300-10000_cl_pass1_src25.csv
[Wed May 30 08:18:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136000101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136000101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 08:18:22 2012] fullrun_pn_xmm0136000101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Wed May 30 08:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136000101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Wed May 30 08:18:22 2012] fullrun_pn_xmm0136000101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Wed May 30 08:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136000101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Wed May 30 08:18:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136000101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136000101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 10:08:07 2012] Spatial fit model total counts = 330.374000, observed total counts = 286.000000
[Wed May 30 10:08:07 2012] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 30 10:08:07 2012] Vigneting correction estimate = 1.000000
[Wed May 30 10:08:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 10:08:07 2012] Assessing source extent using major
[Wed May 30 10:08:07 2012] Source does appear to be extended
[Wed May 30 10:08:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 10:08:28 2012] XMMSAS src. selection expression = ellipse(26898.040161, 32288.747925, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 10:08:28 2012] Writing source region out to fullrun_pn_xmm0136000101_pi300-10000_pass1_cl_src28_src.reg
[Wed May 30 10:08:28 2012] Extracting stamp from image fullrun_pn_xmm0136000101_pi300-10000_cl_sm2.00.img.gz, (272, 334) - (347, 409)
[Wed May 30 10:08:28 2012] XMMSAS bgd. selection expression = annulus(26898.040161, 32288.747925, 1087.500000, 2175.000000, X, Y) && !ellipse(26059.305786, 35054.367157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26124.481445, 32325.166962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26337.876770, 29515.638855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25390.434000, 28569.044000, 2456.128071, 2456.128071, 0.000000, X, Y)
[Wed May 30 10:08:28 2012] Writing fullrun_pn_xmm0136000101_pi300-10000_pass1_cl_src28.gif
[Wed May 30 10:23:58 2012] Mean detx,y = (5447.02, 1456.02) 
[Wed May 30 10:24:00 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 10:24:15 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 10:24:15 2012] Setting source spectrum file to fullrun_pn_xmm0136000101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed May 30 10:24:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0136000101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Wed May 30 11:06:00 2012] Not generating rmf since there are only 87 counts
[Wed May 30 11:06:00 2012] rmf not generated due to insufficient counts
[Wed May 30 14:39:38 2012] Updating aperture counts using extracted products
[Wed May 30 14:39:38 2012] Error reading totcts from fullrun_pn_xmm0136000101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed May 30 14:39:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 14:39:38 2012] Using photon index=1.80, rate=0.00456, arf fullrun_pn_xmm0136000101_pi300-10000_pass1_cl_src28.arf
[Wed May 30 14:39:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 14:39:38 2012] Updating source flux to 1.4e-14
[Wed May 30 14:40:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting