[Thu Oct 13 21:54:13 2011] Detection parameters:
  Position = (277.0, 288.9) = 22 57 10.43 -36 27 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4245.3 +/- 78.1
  Background counts = 25.7
  Rate = 0.1 +/- 0.003

[Thu Oct 13 21:54:14 2011] Off-axis axis estimate = 1.70'
[Thu Oct 13 23:38:50 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Oct 13 23:38:50 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Oct 13 23:38:50 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Thu Oct 13 23:38:50 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Oct 14 00:38:21 2011] fullrun_mos2_xmm0135980201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Oct 14 00:38:21 2011] fullrun_mos2_xmm0135980201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Oct 14 00:38:21 2011] Fit fullrun_mos2_xmm0135980201_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Oct 14 00:38:22 2011] fullrun_mos2_xmm0135980201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 14 00:38:22 2011] fullrun_mos2_xmm0135980201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 14 00:38:22 2011] Fit fullrun_mos2_xmm0135980201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 14 00:38:47 2011] Spatial fit model total counts = 4099.040000, observed total counts = 4090.000000
[Fri Oct 14 00:38:47 2011] Offset between fit and detection position for source 2 = 0.063838 pixels
[Fri Oct 14 00:38:47 2011] 4098.690000 total counts/ 1333.290000 bgd. counts: snr = 75.734829
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.063838 pixels
  Position = (277.0, 288.8) = 22 57 10.44 -36 27 45.0
  Extent = 5.7 (5.5-5.8)", rotation angle = 0
  Source counts = 2765.4 +/- 64.0
  Background counts = 1333.3
  Rate = 0.09 +/- 0.002
[Fri Oct 14 00:38:47 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 00:38:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 00:38:47 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 00:38:47 2011] Source does appear to be extended
[Fri Oct 14 00:38:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 02:37:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 02:37:03 2011] Initial guess for spatial extent in simple fitting = 5.66"
[Fri Oct 14 02:37:03 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.233
[Fri Oct 14 02:37:03 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.66"
[Fri Oct 14 03:51:38 2011] fullrun_mos2_xmm0135980201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Oct 14 03:51:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135980201_pi300-10000_cl_pass1_src1.csv
[Fri Oct 14 03:51:38 2011] fullrun_mos2_xmm0135980201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Oct 14 03:51:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135980201_pi300-10000_cl_pass1_src1.csv
[Fri Oct 14 03:51:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135980201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135980201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 03:51:38 2011] fullrun_mos2_xmm0135980201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 14 03:51:38 2011] fullrun_mos2_xmm0135980201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 14 03:51:39 2011] Fit fullrun_mos2_xmm0135980201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 14 03:52:07 2011] Spatial fit model total counts = 4099.620000, observed total counts = 4090.000000
[Fri Oct 14 03:52:07 2011] Offset between fit and detection position for source 2 = 0.000086 pixels
[Fri Oct 14 03:52:07 2011] 4099.350000 total counts/ 1332.300000 bgd. counts: snr = 75.808166
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000086 pixels
  Position = (277.0, 288.8) = 22 57 10.44 -36 27 45.0
  Extent = 5.7 (5.5-5.8)", rotation angle = 0
  Source counts = 2767.1 +/- 64.0
  Background counts = 1332.3
  Rate = 0.09 +/- 0.002
[Fri Oct 14 03:52:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 03:52:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 03:52:07 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 03:52:07 2011] Source does appear to be extended
[Fri Oct 14 03:52:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 06:02:59 2011] Counts = 2767.050000, rescaling region sizes by 2.000000
[Fri Oct 14 06:02:59 2011] XMMSAS src. selection expression = ellipse(24048.416600, 25079.246400, 679.515620, 679.515620, 0.000000, X, Y)
[Fri Oct 14 06:02:59 2011] Writing source region out to fullrun_mos2_xmm0135980201_pi300-10000_pass1_cl_src2_src.reg
[Fri Oct 14 06:02:59 2011] Extracting stamp from image fullrun_mos2_xmm0135980201_pi300-10000_cl_sm2.00.img.gz, (238, 250) - (316, 328)
[Fri Oct 14 06:02:59 2011] XMMSAS bgd. selection expression = annulus(24048.416600, 25079.246400, 2265.052065, 4530.104130, X, Y) && !ellipse(24291.571350, 24421.115540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20483.707076, 28469.739600, 257.302407, 257.302407, 0.000000, X, Y) && !ellipse(21602.668420, 25042.107200, 688.654420, 283.904008, 63.101601, X, Y) && !ellipse(28332.746080, 24387.674000, 268.159208, 268.159208, 0.000000, X, Y) && !ellipse(23295.180000, 26695.480000, 1175.856034, 1175.856034, 0.000000, X, Y)
[Fri Oct 14 06:02:59 2011] Writing fullrun_mos2_xmm0135980201_pi300-10000_pass1_cl_src2.gif
[Fri Oct 14 06:03:03 2011] Mean detx,y = (154.76, 133.54) 
[Fri Oct 14 06:03:05 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct 14 06:03:29 2011] Binned source spectrum to 10 counts/bin
[Fri Oct 14 06:03:29 2011] Setting source spectrum file to fullrun_mos2_xmm0135980201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Oct 14 06:03:29 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0135980201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Oct 14 06:31:45 2011] Updating aperture counts using extracted products
[Fri Oct 14 06:31:45 2011] Error reading totcts from fullrun_mos2_xmm0135980201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Oct 14 06:31:48 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 06:31:48 2011] Using photon index=1.80, rate=0.0918, arf fullrun_mos2_xmm0135980201_pi300-10000_pass1_cl_src2.arf
[Fri Oct 14 06:31:48 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 06:31:48 2011] Updating source flux to 1e-12
[Fri Oct 14 06:32:55 2011] Reading fit data from xmm0135980201/analysis//spectral/fullrun_mos2_xmm0135980201_pi300-10000_pass1_cl_src2_pl.csv
[Fri Oct 14 06:32:55 2011] Spectral fit parameter nH value = 1.29865e+21
[Fri Oct 14 06:32:55 2011] Spectral fit parameter PhoIndex value = 2.10325
[Fri Oct 14 06:32:55 2011] Failed to get F(0.3-8.0) from xmm0135980201/analysis//spectral/fullrun_mos2_xmm0135980201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Oct 14 06:32:55 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 06:32:55 2011] Using Nh = 1.3e+21, photon index=2.10, rate=0.0918, arf fullrun_mos2_xmm0135980201_pi300-10000_pass1_cl_src2.arf
[Fri Oct 14 06:32:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 06:32:55 2011] Updating source flux to 9.8e-13