[Thu Jul 11 14:44:51 2013] Detection parameters:
  Position = (326.2, 311.9) = 2 54 23.59 41 34 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1251.0 +/- 52.4
  Background counts = 421.9
  Rate = 0.04 +/- 0.002

[Thu Jul 11 14:44:53 2013] Off-axis axis estimate = 2.23'
[Thu Jul 11 18:26:48 2013] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Thu Jul 11 18:26:48 2013] Initial guess for spatial extent in simple fitting = 7.55"
[Thu Jul 11 18:26:48 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.601
[Thu Jul 11 18:26:48 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.55"
[Thu Jul 11 20:20:53 2013] fullrun_mos2_xmm0135950301_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jul 11 20:20:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135950301_pi300-10000_cl_pass0_src2.csv
[Thu Jul 11 20:20:53 2013] fullrun_mos2_xmm0135950301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jul 11 20:20:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135950301_pi300-10000_cl_pass0_src2.csv
[Thu Jul 11 20:20:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135950301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135950301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 20:20:54 2013] fullrun_mos2_xmm0135950301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jul 11 20:20:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135950301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jul 11 20:20:54 2013] fullrun_mos2_xmm0135950301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jul 11 20:20:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135950301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jul 11 20:20:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135950301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135950301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 11 20:21:16 2013] Warning, spatial fit 2 centroid is now closest to src. 10
[Thu Jul 11 20:21:16 2013] Source 4 is offset by -0.724606 and 3.576490 pixels which is larger than
2 X fitted extent = 3.922216 x 0.887825, not incorporating fit results
[Thu Jul 11 20:21:16 2013] Spatial fit model total counts = 7339.650000, observed total counts = 7328.000000
[Thu Jul 11 20:21:16 2013] Offset between fit and detection position for source 4 = 5.716281 pixels
[Thu Jul 11 20:21:16 2013] Warning, changing simple spatial fit ID from 2 to 10
[Thu Jul 11 20:21:16 2013] 7233.034000 total counts/ 6838.370000 bgd. counts: snr = 4.772558
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 5.716281 pixels
  Position = (331.9, 312.3) = 2 54 21.38 41 34 36.7
  Extent = 15.9 (15.9-15.9)", rotation angle = 0
  Source counts = 394.7 +/- 85.0
  Background counts = 6838.4
  Rate = 0.01 +/- 0.003
[Thu Jul 11 20:21:16 2013] Vigneting correction estimate = 1.000000
[Thu Jul 11 20:21:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 11 20:21:16 2013] Assessing source extent using major axis lower bound
[Thu Jul 11 20:21:16 2013] Source does appear to be extended
[Thu Jul 11 20:21:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 11 23:33:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 11 23:33:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 11 23:33:28 2013] Initial guess for spatial extent in simple fitting = 15.92"
[Thu Jul 11 23:33:28 2013] source mask rpix=3.7, npix_max = 69, mask sum = 64, frac = 0.925
[Thu Jul 11 23:33:28 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 15.92"
[Fri Jul 12 00:57:43 2013] fullrun_mos2_xmm0135950301_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul 12 00:57:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135950301_pi300-10000_cl_pass1_src2.csv
[Fri Jul 12 00:57:43 2013] fullrun_mos2_xmm0135950301_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul 12 00:57:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135950301_pi300-10000_cl_pass1_src2.csv
[Fri Jul 12 00:57:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135950301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135950301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 00:57:43 2013] fullrun_mos2_xmm0135950301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul 12 00:57:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135950301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jul 12 00:57:43 2013] fullrun_mos2_xmm0135950301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul 12 00:57:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135950301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jul 12 00:57:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135950301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135950301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 00:58:04 2013] Warning, spatial fit 2 centroid is now closest to src. 21
[Fri Jul 12 00:58:04 2013] Source 4 is offset by -0.704690 and -3.182175 pixels which is larger than
2 X fitted extent = 1.022745 x 1.022745, not incorporating fit results
[Fri Jul 12 00:58:04 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 00:58:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 00:58:04 2013] Assessing source extent using major axis lower bound
[Fri Jul 12 00:58:04 2013] Source does appear to be extended
[Fri Jul 12 00:58:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 12 19:16:30 2013] XMMSAS src. selection expression = ellipse(28824.456000, 27122.512800, 955.170027, 955.170027, 0.000000, X, Y)
[Fri Jul 12 19:16:30 2013] Writing source region out to fullrun_mos2_xmm0135950301_pi300-10000_pass1_cl_src4_src.reg
[Fri Jul 12 19:16:30 2013] Extracting stamp from image fullrun_mos2_xmm0135950301_pi300-10000_cl_sm2.00.img.gz, (277, 257) - (387, 367)
[Fri Jul 12 19:16:30 2013] XMMSAS bgd. selection expression = annulus(28824.456000, 27122.512800, 1591.950046, 3183.900092, X, Y) && !ellipse(27502.488400, 27317.273000, 1033.864030, 1033.864030, 0.000000, X, Y) && !ellipse(27570.657318, 25298.504486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27396.370575, 24685.909576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25809.191406, 27680.225067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25636.805400, 28492.454800, 964.240028, 425.745612, 107.492900, X, Y) && !ellipse(26102.296021, 28818.335236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29543.107788, 27963.083923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25718.705353, 27269.040680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29744.566101, 27445.865631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29898.964020, 26915.916473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26196.369019, 26136.484833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28983.539124, 25446.668396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31111.462000, 27635.500000, 658.736819, 658.736819, 0.000000, X, Y) && !ellipse(30283.288400, 27739.430000, 1278.424037, 1278.424037, 0.000000, X, Y) && !ellipse(25372.051453, 26308.326294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25400.505402, 26753.553467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31245.668000, 27629.760000, 1361.368039, 612.729618, 314.517000, X, Y) && !ellipse(28338.377625, 25185.429443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25713.178000, 25832.645800, 1047.968030, 1047.968030, 0.000000, X, Y) && !ellipse(30107.410370, 26060.922699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25147.868744, 27786.006744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30529.398071, 26666.136627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30097.220367, 28226.762848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27576.426697, 24738.266754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28051.894653, 29182.894653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26662.858000, 29624.666000, 1114.952032, 1114.952032, 0.000000, X, Y) && !ellipse(24782.249969, 26492.906586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30765.977112, 27095.619476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26306.818237, 25034.838837, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 12 19:16:30 2013] Writing fullrun_mos2_xmm0135950301_pi300-10000_pass1_cl_src4.gif
[Fri Jul 12 19:19:30 2013] Mean detx,y = (-1281.95, 235.89) 
[Fri Jul 12 19:19:31 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 12 19:19:36 2013] Binned source spectrum to 10 counts/bin
[Fri Jul 12 19:19:37 2013] Setting source spectrum file to fullrun_mos2_xmm0135950301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 12 19:19:37 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0135950301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jul 12 20:11:52 2013] Updating aperture counts using extracted products
[Fri Jul 12 20:11:52 2013] Total counts from fullrun_mos2_xmm0135950301_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 12527.00
[Fri Jul 12 20:11:52 2013] Total counts from fullrun_mos2_xmm0135950301_pi300-10000_pass1_cl_src4_bgd.pi.gz = 12191.00
[Fri Jul 12 20:11:52 2013] Got source and background scale factors 2680308.000000, 6414316.000000
[Fri Jul 12 20:11:52 2013] User source parameters:
  Position = (331.9, 312.3) = 2 54 21.38 41 34 36.7
  Extent = 15.9 (15.9-15.9)", rotation angle = 0
  Source aperture counts = 7432.8 +/- 112.9
  Background aperture counts = 5094.2
  Rate = 0.2 +/- 0.004

[Fri Jul 12 20:11:57 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul 12 20:11:57 2013] Using photon index=1.80, rate=0.0125, arf fullrun_mos2_xmm0135950301_pi300-10000_pass1_cl_src4.arf
[Fri Jul 12 20:11:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 12 20:11:57 2013] Updating source flux to 1.3e-13
[Fri Jul 12 20:12:06 2013] Flag b found in src. 4 procflags, skipping spectral fitting
[Fri Jul 12 20:12:11 2013] xmm0135950301/analysis//spectral/fullrun_mos2_xmm0135950301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete