[Sun May 27 09:42:30 2012] Detection parameters:
  Position = (324.0, 404.2) = 18 2 19.01 -22 53 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.9 +/- 8.8
  Background counts = 11.0
  Rate = 0.008 +/- 0.002

[Sun May 27 09:42:30 2012] Off-axis axis estimate = 7.89'
[Sun May 27 09:43:49 2012] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Sun May 27 09:43:49 2012] Initial guess for spatial extent in simple fitting = 10.37"
[Sun May 27 09:43:49 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.082
[Sun May 27 09:43:49 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.37"
[Sun May 27 10:01:37 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_src15.ximg exists
[Sun May 27 10:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_src15.csv
[Sun May 27 10:01:37 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun May 27 10:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_src15.csv
[Sun May 27 10:01:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 10:01:38 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun May 27 10:01:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sun May 27 10:01:38 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun May 27 10:01:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sun May 27 10:01:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 11:08:45 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 10.592088 pixels away
[Sun May 27 11:08:45 2012] Vigneting correction estimate = 1.000000
[Sun May 27 11:08:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 11:08:45 2012] Assessing source extent using major
[Sun May 27 11:08:45 2012] Source does appear to be extended
[Sun May 27 11:08:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 11:08:58 2012] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Sun May 27 11:08:58 2012] Initial guess for spatial extent in simple fitting = 10.37"
[Sun May 27 11:08:58 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.082
[Sun May 27 11:08:58 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 10.37"
[Sun May 27 11:32:50 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_src14.ximg exists
[Sun May 27 11:32:50 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun May 27 11:32:50 2012] Fit fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_src14 appears to have run properly
[Sun May 27 11:32:50 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun May 27 11:32:50 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun May 27 11:32:50 2012] Fit fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sun May 27 12:20:00 2012] Spatial fit model total counts = 100.663000, observed total counts = 99.000000
[Sun May 27 12:20:00 2012] Offset between fit and detection position for source 18 = 0.254164 pixels
[Sun May 27 12:20:00 2012] 98.977300 total counts/ 73.168000 bgd. counts: snr = 3.017280
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.254164 pixels
  Position = (324.2, 404.1) = 18 2 18.95 -22 53 45.7
  Extent = 4.9 (3.5-6.5)", rotation angle = 0
  Source counts = 25.8 +/- 9.9
  Background counts = 73.2
  Rate = 0.007 +/- 0.003
[Sun May 27 12:20:00 2012] Vigneting correction estimate = 1.000000
[Sun May 27 12:20:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 12:20:00 2012] Assessing source extent using major axis lower bound
[Sun May 27 12:20:00 2012] Source does appear to be extended
[Sun May 27 12:20:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 12:20:10 2012] XMMSAS src. selection expression = ellipse(28156.023960, 35103.879200, 292.074608, 292.074608, 0.000000, X, Y)
[Sun May 27 12:20:10 2012] Writing source region out to fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src18_src.reg
[Sun May 27 12:20:10 2012] Extracting stamp from image fullrun_pn_xmm0135742701_pi300-10000_cl_sm2.00.img.gz, (307, 387) - (341, 421)
[Sun May 27 12:20:10 2012] XMMSAS bgd. selection expression = annulus(28156.023960, 35103.879200, 486.791014, 973.582028, X, Y)
[Sun May 27 12:20:10 2012] Writing fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src18.gif
[Sun May 27 12:27:30 2012] Mean detx,y = (-3295.33, 10657.91) 
[Sun May 27 12:27:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 12:27:50 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 12:27:50 2012] Setting source spectrum file to fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun May 27 12:27:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun May 27 12:32:57 2012] Not generating rmf since there are only 25 counts
[Sun May 27 12:32:57 2012] rmf not generated due to insufficient counts
[Sun May 27 12:53:08 2012] Updating aperture counts using extracted products
[Sun May 27 12:53:08 2012] Error reading totcts from fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun May 27 12:53:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 12:53:08 2012] Using photon index=1.80, rate=0.00676, arf fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src18.arf
[Sun May 27 12:53:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 12:53:08 2012] Updating source flux to 4.2e-14
[Sun May 27 12:53:36 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting